Netgear Prosafe 8 Port Manual

Use VLANS for Traffic Segmentation 41
 ProSAFE 8-Port and 16-Port Gigabit Click Switch
7. 
Select the Enable radio button.
A message displays asking if you want to delete previous VLAN settings.
8.  Click the  Ye
 s button.
9.  For each port to be added to the group, enter the ID of the VLAN group.
If all the VLAN groups share an uplink to the Internet or servers, enter\
 all in the  VLAN 
Group field for the port that you want to use for the uplink.
10.  Click the  Apply button.
Your settings are...

Use VLANS for Traffic Segmentation 
42 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status screen displays.
6. Select VLAN > Port Based > Advanced.
The Advanced Port-Based VLAN screen displays.
7. Select the Enable radio button.
A message displays asking if you...

Use VLANS for Traffic Segmentation 43
 ProSAFE 8-Port and 16-Port Gigabit Click Switch
The Advanced Port-based VLAN Status screen displays.
7.  Select the Enable radio button.
A message displays asking if you want to delete previous VLAN settings.
8.  Click the  Ye
 s button.
9.  In the VLAN identifier menu, select a VLAN.
10.  Select the ports that you want to add to the VLAN.
11.  Click the  Apply button.
Your settings are saved.
Create a Basic 802.1Q-Based VLAN
You configure ports to a VLAN group ID...

Use VLANS for Traffic Segmentation 
44 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status screen displays.
6. Select VLAN > 802.1Q.
The Basic 802.1Q VLAN screen displays. 
7. Select the Enable radio button.
A message displays asking if you want to delete the previous VLAN settings.
8. Click the Ye s button.
The switch ports display.
9. For each port to be configured, enter the VLAN group ID...

Use VLANS for Traffic Segmentation 
45  ProSAFE 8-Port and 16-Port Gigabit Click Switch
9. For each port to be configured, enter the VLAN group ID (1–409344 or all).
10. Click the Apply button.
Your settings are saved.
Add Advanced 802.1Q VLAN Groups
You configure ports to a VLAN group ID (1–4093 or all). The advanced configuration feature 
allows you to create and update VLAN groups with more information.
Use the ProSAFE Plus Utility to Add Advanced 802.1Q VLAN 
Groups
To add advanced 802.1Q VLAN...

Use VLANS for Traffic Segmentation 
46 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
Use Browser-Based Access to Add Advanced 802.1Q VLAN 
Groups
To add advanced 802.1Q VLAN groups:
1. Set up your computer to use an IP address in the same subnet as the IP address of the 
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet port on the switch.
3. Launch a web browser.
4. In the address field of the browser, enter the IP address of the switch.
You can find the IP address of the...

Use VLANS for Traffic Segmentation 
47  ProSAFE 8-Port and 16-Port Gigabit Click Switch
The configuration home screen displays a list of Plus switches that it discovers on the 
local network.
3. Select a switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status screen displays.
6. Select VLAN > 802.1Q >...

Use VLANS for Traffic Segmentation 48
ProSAFE 8-Port and 16-Port Gigabit Click Switch 
The Switch Information screen displays.
6.  Select  VLAN > 802.1Q > VLAN Membership.
7. In the VLAN ID  menu, select a VLAN group.
8.  Select the check boxes for the ports you want to add to the VLAN group. \
You can use the group operation commands to add all ports or clear the cu\
rrent  selections.
9.  Click the  Apply button.
Your settings are saved.
10.  T
o verify your selections, select VLAN > 802.1Q >...

Use VLANS for Traffic Segmentation 
49  ProSAFE 8-Port and 16-Port Gigabit Click Switch
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status screen displays.
6. Select VLAN > 802.1Q > Advanced > PVID.
The Port PVID screen displays.
7. Select a port.
8. Enter the PVID.
9. Click the APPLY button.
Your settings are saved.
Use Browser-Based Access to Assign a PVID to a...

Use VLANS for Traffic Segmentation 
50 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
Set Up Port Tagging
Port tagging allows a port to add VLAN ID tags to data packets sent through the port. The 
tag identifies the VLAN to receive the data.
You can set up port tagging in the VLAN Membership screen. The port check boxes allow 
you to select U (un tagged) or T (tagged) in addition to adding the port to the VLAN group. 
This step causes the data for an individual port to be tagged (associated) with a...