Netgear N750 Manual

Installing Your Wireless Router Manually (Advanced and Linux Users) 17
4.From the main menu, select Setup Wizard. The Setup Wizard screen displays.
5.Select No to set up the connection yourself. Click Next and the Basic Settings screen will 
display. Enter the required information for your ISP connection in the appropriate fields. If 
you need assistance, follow the Basic Settings Help screens on the router interface or see the 
online User Manual for this N750 wireless gigabit router. 
6.Click Apply to...

Installing Your Wireless Router Manually (Advanced and Linux Users) 18
If you do not connect successfully: 
• Review your settings and make sure that you have selected the correct options and typed 
everything correctly. 
• Contact your ISP to verify that you have the correct configuration information.
• Read “Troubleshooting” on page 26.
If problems persist, register your NETGEAR product and contact NETGEAR Technical Support. 

Configuring Your Wireless Network 19
Configuring Your Wireless Network
After installing your router, you must log into the router to complete your wireless setup. When 
you log in to the browser, you will be prompted to check for firmware updates from the 
NETGEAR update server. 
Accessing Your Router After Installation and 
Checking for New Firmware
The Smart Wizard only appears when you run the CD. If you want to change the settings after 
installing and configuring your router, you can click the...

Configuring Your Wireless Network 20
Configuring Your Wireless Settings and Security 
Options
The wireless network settings of the router must match the wireless network settings of any 
wireless devices that connect wirelessly to the router (such as wireless adapter cards and wireless 
computers). 
For a wireless connection, the router and each wireless computer must use the same SSID, also 
called the wireless network name, and the same wireless security. NETGEAR strongly 
recommends that you use...

Configuring Your Wireless Network 21
• The wireless mode (802.11n) that each wireless adapter supports. The default is 
Up to 145Mbps at 2.4 GHz and 450Mbps at 5 GHz.
• Wireless security option. NETGEAR strongly recommends that you use wireless security. To 
successfully implement wireless security, check each wireless adapter to determine which 
wireless security option it supports. 
To set up basic wireless connectivity on your router:
1.
Log in to the N750 wireless gigabit router at...

Configuring Your Wireless Network 22
a.Enter the SSID name. The default is NETGEAR-5G.
b.Select the operating channel for the wireless mode. The default is 153 for North America, 
and 44 for most other countries. If there is an Auto option in the channel list and you select 
it, the router will find the best operating channel available.
If you notice interference from nearby devices, you can select a different channel. 
c.Leave the wireless mode set to the default setting of Up to 450Mbps for 5GHz....

Configuring Your Wireless Network 23
4.Check that each wireless computer has a wireless link and is able to obtain an IP address by 
DHCP from the router. 
To access the Internet from any computer connected to your N750 wireless gigabit router, launch a 
browser such as Microsoft Internet Explorer or Mozilla Firefox.
Using Push N Connect (WPS) to Configure Your Wireless 
Network
If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure 
the router’s SSID and...

Configuring Your Wireless Network 24
3.While the WPS LED is blinking, you have 2 minutes to enable WPS on the device you are 
connecting to. The blinking ceases when one of these two conditions occurs:
• WPS has enabled security between the router and the other device.The router has 
generated an SSID, implemented WPA/WPA2 wireless security (including a PSK security 
password) on the router and has sent this configuration to the wireless client.
• If you do not establish a connection using WPS during...

Configuring Your Wireless Network 25
3.Note your SSID name. If you used WPS to establish a connection with other devices, the SSID 
will now be a randomly selected name. 
4.Make sure that you have selected the region in which the wireless router will operate. 
5.Check the Wireless mode. The default is Up to 450Mbps at 5GHz & 145Mbps at 2.4GHz. If 
you are experiencing interference, try selecting one of the other available settings (see 
“Configuring Your Wireless Settings and Security Options” on page...

Troubleshooting26
Troubleshooting
This chapter gives information about troubleshooting your N750 wireless gigabit router. You can 
find help with the following problems:
•“Basic Setup Checklist” on page 26
•“Checking Basic Router Functions” on page 27
•“Troubleshooting Login Problems” on page 29
•“Checking the Internet Service Connection” on page 30
•“Testing the Path from a PC to Your Router” on page 32
•“Testing the Path from a PC to the Internet” on page 33
Basic Setup Checklist
The following items...