Netgear N600 Wireless Router User Manual

Advanced Settings141
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
3. 
Click  Apply to save your changes. The Static Routes table is updated to show the ne\
w 
entry.
Figure 58.  Updated static routes
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet applian\
ces and computers, 
access the network and connect to other devices as needed. UPnP devices \
can 
automatically discover the services from other registered UPnP devices o\
n the network.
To...

Advanced Settings142
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
(internal and external) that device has opened. The UPnP Portmap Table\
 also 
displays what type of port is opened and if that port is still active fo\
r each IP address. 
3.  To save, cancel your changes, or refresh the table:
•     To save the new settings to the wireless modem router, click  Apply. 
•     To disregard any unsaved changes, click  Cancel. 
•      To update the portmap table and to show the active ports...

Advanced Settings143
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic pa\
ssing through your 
wireless modem router’s Internet port. With the Traffic Meter utility\
, you can set limits for 
traffic volume, set a monthly limit, and get a live update of traffic us\
age.
To monitor traffic on your router:
1. 
Under Advanced on the main menu, select  Traffic Meter.
2. To enable the Traffic Meter, select the...

Advanced Settings144
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
3. 
If you would like to record and restrict the volume of Internet traffic,\
 select the  Traffic 
volume control  by radio button. You can select one of the following options for controlli\
ng 
the traffic volume:
•     No Limit. No restriction is applied when the traffic limit is reached.
•     Download only . The restriction is applied to incoming traffic only.
•     Both Directions . The restriction is applied to both...

145
9
9.   Troubleshooting
Diagnosing and solving problems
This chapter provides information to help you diagnose and solve problem\
s you might have with your wireless modem router. If you do not find the solution here, check \
the NETGEAR support 
site at  http://support.netgear.com for product and contact information.
This chapter contains the following sections: •     Router Not On 
•     No ISP Connection 
•     TCP/IP Network Not Responding 
•     Cannot Log In 
•     Changes Not Saved 
•...

Troubleshooting146
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
Router Not On
When you turn the power on, the Power, LAN, Wireless, DSL, and Internet \
LEDs should light 
as described here. If they do not, refer to the sections that follow for\
 help.
1. 
When power is first applied, the Power LED lights.
2.  After approximately 10 seconds, other LEDs light as follows:
a. The LAN ports LED lights when any local port is connected.
b.  The 2.4 GHz and 5 GHz Wireless LEDs light.
c.  The DSL...

Troubleshooting147
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
If the error persists, you could have a hardware problem and should cont\
act NETGEAR 
technical support.
Power LED Is Red
When the router is turned on, it performs a power-on self-test. If the P\
ower LED turns red 
after a few seconds or at any other time during normal operation, there \
is a fault within the 
router. 
If the Power LED turns red to indicate a router fault, turn the power of\
f and on to see if the...

Troubleshooting148
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
No ISP Connection
If your router cannot access the Internet, first check the ADSL connecti\
on, and then check 
the WAN TCP/IP connections. See 
Figure  60, Front panel LEDs on page  146 for the location 
of the LEDs.
ADSL Link
First determine whether you have an ADSL link with the service provider.\
 The state of this 
connection is indicated by the DSL LED.
DSL LED Is Green or Blinking Green
You have a good ADSL...

Troubleshooting149
 N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700
Internet LED Is Red
If the Internet LED is red, the device could not connect to the Internet\
. Verify the following:
•     Check that your login credentials are correct. See Log In to the N600 Modem Router on 
page   24 for more information.
•     Check that the information you entered on the Basic Settings screen is c\
orrect. See  Manual Setup (Basic Settings) on page  28.
•     Check with your ISP to verify that the...

Troubleshooting150
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 
Debug PPPoE or PPPoA
Debug the PPPoE or PPPoA connection as follows:
1. 
Access the router menus at http://192.168.0.1 and log in.
2.  Under Maintenance, select  Router Status.
3.  Click the  Connection Status  button.
4.  If all of the steps indicate OK, your PPPoE or PPPoA connection is worki\
ng.
5.  If any of the steps indicate Failed, you can attempt to reconnect by cli\
cking  Connect. 
The wireless modem router...