Netgear Ex7000 Nighthawk Ac1900 Wifi Range Extender User Manual

FAQs and Troubleshooting 
71  AC1900 WiFi Range Extender
b. Toggle the second-to-last digit of the binary code to 1 or 0.
If the second-to-last digit is 1, toggle it to 0. If the second-to-last digit is 0, toggle it to 
1. For example, if the binary code is 1100/0100, the new binary code is 1100/0110.
c. Convert the new binary code back to a hexadecimal value.
For example, if the binary code is 1100/0110, the new hexadecimal value is C6..
91001
A1010
B1011
C1100
D1101
E111 0
F1111
Table 4.  Binary...

FAQs and Troubleshooting 
72 AC1900 WiFi Range Extender 
d. Replace the first two hexadecimal values in the old MAC 1 address with the new 
value you converted and add the new MAC 1 address to your router’s MAC filter 
table.
For example, if your old MAC 1 address was C4:04:15:5F:20:AD, your new MAC 1 
address is C6:04:15:5F:20:AD.
12. Enable the router’s MAC filter, wireless access control, or ACL.
Cannot Connect to the Extender
If you cannot connect to the extender, determine what prevents you from...

FAQs and Troubleshooting 
73  AC1900 WiFi Range Extender
If you use Smart Setup, and the extender does not connect to the WiFi router, does not 
connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup 
displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the 
NO, CONFIGURE MANUALLY button. 

74
A
A.   Factory Settings and Technical 
Specifications
This appendix covers the following topics: 
•Factory Default Settings
•Technical and Environmental Specifications 

 Factory Settings and Technical Specifications75
 AC1900 WiFi Range Extender
Factory Default Settings
To reset the extender to factory default settings, you can use either the\
 Reset button on the 
rear panel or the Erase function. For more information, see Return the Extender to Its Factory 
Default Settings on page  44.
The following table shows the factory default settings.
Table 5.  Factory default settings  
FeatureDefault Settings
Smart Setup Enabled
WiFi communication Enabled
WiFi network name...

 Factory Settings and Technical Specifications76
AC1900 WiFi Range Extender 
Technical and Environmental Specifications
The following table shows the technical and environmental specifications\
.
Table 6.  Technical specifications
 
Technical Specifications 
Network protocol and 
standards compatibility Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT 
(many-to-one), VPN pass-through (IPSec, PPTP)
Power adapter • North 
America (input): 120V, 60 Hz
• All regions (output): 12 VDC...