Netgear Ex3920 Ac750 Wifi Range Extenders User Manual

Get Started 
11  AC750 WiF Range Extender
To use WPS to connect the extender to your WiFi router:
1. Press the WPS button on the side panel of the extender.
The WPS LED blinks.
2. Within two minutes, press the WPS button on your router.
The WPS LED on the extender lights solid green, the Router Link LED lights, and the 
extender connects to your existing WiFi network.
If the Router Link LED does not light, try again. If it still does not light, see Connect with 
Web Browser Setup on page 11. 
3. If your...

Get Started 12
AC750
 WiF  Range Extender 
After the connection with the computer or WiFi device is established, th\
e Device Link LED 
lights.
2.  Launch web browser
 .
3.  Enter  www
 .mywifiext.net in the address field of the browser.
The New Extender Setup page displays.
4.  Click the  NEW EXTENDER SETUP  button.
The first time that you log in to the extender, the Create Account page displays. If the  Create 
 Account page does not display, visit  www.mywifiext.net.
5. Complete the fields on the...

Get Started 
13  AC750 WiF Range Extender
9. In the Password (Network Key) field, type the existing WiFi network password (also called 
passphrase or security key) and click the NEXT button.
10. Set the network name (SSID) and password for your new extender WiFi network and click 
the NEXT button.
11. Use a WiFi network manager on the computer or WiFi device to connect to the new 
extended WiFi network.
Repeat this step for all of your computers and WiFi devices.
12. Click the CONTINUE button.
A message...

Get Started 14
AC750
 WiF  Range Extender 
Connect an Ethernet-Enabled Device
After the extender is connected to your existing WiFi network, you can c\
onnect a wired 
device to the extender using an Ethernet cable. The device can then access your existing 
network through the extender’s WiFi connection.
Figure 4. Rear panel Ethernet LAN ports
Use an Extenders in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi\
 hotspot by using a wired Ethernet connection....

Get Started 15
 AC750
 WiF  Range Extender
To use the extender in access point mode:
1. Plug the extender into an electrical outlet.
2.  W
ait for the Power LED to light amber and then turn green. 
If the Power LED does not light, press the  Power On/Off button on the side of the 
extender
 .
3.  Use an Ethernet cable to connect the Ethernet port on the extender to a \
router Ethernet LAN 
port or a remote Ethernet LAN jack with LAN access.
The extender joins the LAN and creates a WiFi hotspot.
4.  Use...

Get Started 
16 AC750 WiF Range Extender 
9. Click the ACCESS POINT button.
The extender checks for an Internet connection.
10. When prompted, set the network name (SSID), security option, and password, and click the 
NEXT button.
Your settings are applied and the extender is ready to be used as an access point.
11. Use a WiFi network manager on the computer or WiFi device to connect to the new access 
point network.
Repeat this step for all of your computers and WiFi devices.
12. Click the CONTINUE...

Get Started 
17  AC750 WiF Range Extender
Run Smart Setup Installation
You can use Smart Setup to change the extender settings. This is an easy way to connect the 
extender to a different router or to change the extender WiFi network name (SSID) or WiFi 
password.
To run Smart Setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the 
new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED 
lights solid...

18
3
3.   Extender Network Settings
This chapter covers the following topics: 
•View Connected Devices 
•Boost Your Video Streaming with FastLane Technology 
•View WiFi Settings 
•Change the WiFi Network Name 
•Turn Off the SSID Broadcast to Create a Hidden Network 
•Disable or Enable the WiFi Radios 
•Change the WiFi Speed 
•Use WPS to Add a Computer to an Extender’s WiFi Network 
•Deny Access to a Computer or WiFi Device 
•Set Up an Access Schedule 
•Change an Extender’s Device Name 
•Set Up an...

Extender Network Settings 19
 AC750
 WiF  Range Extender
View Connected Devices
You can view a list of devices that are connected to the extender network\
.
To view connected devices:
1. On a computer or WiFi device that is connected to the extender network, \
launch a web 
browser

. 
2.  In the address field of your browser
 , enter www.mywifiext.net. 
3.  When prompted, enter your email address and password.
4.  Click the  Menu icon 
.
The extender menu displays.
5.  Select  Settings > Connected...

Extender Network Settings 20
AC750
 WiF  Range Extender 
When you enable FastLane Technology, two options are available:
•Use the 2.4 GHz band to connect the extender to the WiFi devices and use\
 the 5 GHz 
band to connect the extender to the WiFi router. Use this mode if your W\
iFi router 
supports the 5
  GHz  band but the devices that you want to use for gaming and streaming 
support the 2.4 GHz band.
• Use the 5 GHz band to connect the extender to the WiFi devices and use t\
he 2.4 GHz 
band to...