Netgear Dm200 Broadband High Speed Dsl Modem User Manual

Description
Field
These settings are disabled because they do not apply to a VDSL connection.
Multiplexing Method
VPI
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP.
A 
VLAN ID might be required if you subscribe to both Internet service and a service such
as IPTV. If your ISP did not provide you with a VLAN ID, leave the Use VLANID check
bo

x cleared, which is the default setting.
Use VLANID
If your ISP provided you with a VLAN ID and a priority value, enter the...

(Continued)
Description
Field
If you know that your ISP does not automatically transmit DNS addresses to the modem
during login, select this option and enter the IP address of your ISP primary DNS server.
If secondary and tertiary DNS server addresses are available, enter them also.
Use These DNS Servers
Router MAC Address
The Ethernet MAC address that the modem uses on the Internet port. Some ISPs register the MAC address of the
netw

ork interface card in your computer when your account is first...

If your ISP supports two virtual interfaces (one Internet virtual interface and one IPTV
virtual interface), either you can connect a computer or router to the modem or you
can connect an IPTV device to the modem. Because the modem provides a single
LAN port, you can connect only one type of device and you cannot use both virtual
interfaces simultaneously.
Note
To view or specify the settings for a VDSL Internet connection that requires a login and
uses a PPPoE service: 1.
Launch a web browser from a...

The following figure shows the settings that display when you configure a VDSL connection with a login
and PPPoE service.
11.
Enter the VDSL settings as described in the following table. Description
Field
These settings are disabled because they do not apply to a VDSL connection.
Multiplexing Method
VPI
VCI
Select the Use VLANID check box and enter the VLAN ID, as indicated by your ISP.
A VLAN ID might be required if you subscribe to both Internet service and a service such
as IPTV. If your ISP did not...

(Continued)
Description
Field
If your ISP provided you with a VLAN ID and a priority value, enter the priority value,
which is a number from 0 to 7.
You can enter a priority value only in combination with a VLAN ID. If your ISP did not
provide you with a priority value, leave the default setting, which depends on the selected
ISP.
Priority (0 ~ 7)
If your ISP does not support bridge mode for an IPTV virtual interface, the check box
does not display onscreen.
If you are specifying the settings for the...

(Continued)
Description
Field
Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns these
addresses.
Get Dynamically from ISP
Enter the IP address, IP subnet mask, and gateway IP address that your ISP assigned
you for static IP address service. The gateway is the ISP router to which your modem
connects

.
Use Static IP Address
Domain Name Server (DNS) Address
The DNS server is used to look up site addresses based on their domain names.
Your ISP uses DHCP to assign your DNS servers....

Specify an IPv6 Internet Connection
The modem supports different types of IPv6 Internet connections for which you can specify the settings
man
ually.
IPv6 Internet Connections and IPv6 Addresses
The  modem
 can support an IPv6 Internet connection through the following connection types:
• 6to4 tunnel
. For more information, see Set Up an IPv6 6to4 Tunnel Internet Connection on page 47.
• P
ass-through. For more information, see Set Up an IPv6 Pass Through Internet Connection on page
49
.
• Fixed
. For...

A login window opens.
3. Enter the modem user name and password.
The user name is 
admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select 
ADVANCED > Advanced Setup > IPv6.
The Basic Settings page displa
ys.
5. From the 
Internet Connection Type menu, select 6to4 Tunnel. The 
modem automatically detects the information in the Router’s IPv6 Address on LAN field. This field
sho
ws the IPv6 address that is acquired for the modem’s LAN...

If you do not specify an ID here, the modem generates one automatically from its MAC address.
9. Clic
k the Apply button.
Y

our settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the modem functions as a Layer 2 Ethernet switch with two ports (LAN and WAN
Ether

net ports) for IPv6 packets. The 
modem does not process any IPv6 header packets.
T
o set up a pass-through IPv6 Internet connection: 1.
Launch a web browser from a computer that is connected to the...

5.
From the Internet Connection Type menu, select Fixed. 6.
Configure the fixed IPv6 addresses for the WAN connection:
•IPv6 Address/Prefix Length
. The IPv6 address and prefix length of the modem’s WAN interface.
• Default IPv6 Gate
way
. The IPv6 address of the default IPv6 gateway for the modem’s WAN
interf
ace.
• Primary DNS Server
. The primary DNS server that resolves IPv6 domain name records for the
modem
.
• Secondary DNS Server
. The secondary DNS server that resolves IPv6 domain name records...