Netgear Dm200 Broadband High Speed Dsl Modem User Manual

If you cannot connect after several minutes, you might be using an incorrect service name, user name, or
password. Or your ISP might not be able to provide an Internet connection. For more information, see one
of the following sections:
•
Specify an ADSL Connection With a Login and PPPoA or PPPoE Service on page 34
• Specify a 
VDSL Connection With a Login and PPPoE Service
 on page 42 Unless you connect manually, the 
modem does not authenticate using PPPoE or
PPPoA until data is transmitted to the...

To ping the modem from a Windows computer:
1.
From the Windows taskbar, click the Start
 button and select Run.
2. In the field provided, enter 
ping followed by the IP address of the modem, as in this example:
ping 192.168.5.1
3. Click the 
OK button.
A message such as the following one displays:
Pinging  with 32 bytes of data
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the...

•
If your ISP assigned a host name to your computer, enter that host name as the account name. For
more information, see one of the following sections:
-Specify an ADSL Connection Without a Login on page 30
- Specify a 
VDSL Connection Without a Login
 on page 38
• Y
our ISP might be rejecting the Ethernet MAC addresses of all but one of your computers.
Many broadband ISPs restrict access by allowing traffic only from the MAC address of your modem,
but some additionally restrict access to the MAC address...

A
Supplemental Information
This appendix covers the following topics:
•Factory Settings  on page 105
• Technical Specifications
 on page 106 104 

Factory Settings
You can reset the modem to the factory default settings, which are shown in the following table.
F
or more information about resetting the modem to its factory settings, see Return the Modem to Its Factory
Default Settings on page 76.
T

able 3. DM200 modem factory default settings Default Setting
Feature
Router login
www.routerlogin.net (or www.routerlogin.com or 192.168.5.1)
User login URL
admin
User name (case-sensitive)
password
Login password
(case-sensitive)
Router (Modem +...

Table 3. DM200 modem factory default settings (Continued)
Default Setting
Feature
•North America: Pacific Standard Time
• Europe: GMT
• Other continents: Varies by region
Time zone
Disabled
Time adjusted for daylight
saving time
Technical Specifications
Table 4. DM200 modem specifications Description
Feature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPPoA
Data and routing protocols
•North America: 120V, 60 Hz, input
• UK, Australia: 240V, 50 Hz, input
• Europe: 230V, 50 Hz, input
• All regions: 12V, 0.5A...

Table 4. DM200 modem specifications (Continued)
Description
Feature
One RJ-11 asynchronous DSL (ADSL/VDSL) port
DSL
•VDSL2, VDSL, ADSL2+, ADSL2, and ADSL multimode
• Up to 100 Mbps, both upstream and downstream
• Supports Annex A, L, and M
• Supports all VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
• VDSL2 interface compliance with ITU-T993.2
• G.992.1 (G.dmt), Annex A compliant
• G.992.2 (G.lite), Annex A compliant
• ANSI T1.413 compliant
• G.992.3 (ADSL2) compliant, Annex A, L, and M
• G.992.5...