Netgear Dgnd4000 N750 Wireless Dual Band Gigabit Adsl2 Plus Modem Router User Manual

							NETGEAR genie BASIC Settings 41
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
NETGEAR genie Mobile App
To install the genie mobile app:
1. 
Using your mobile device, navigate to the 
 Apple AppStore or Google Play for Android, 
and search for NETGEAR genie. You can use the following QR codes to speed up this 
process:
Android app
iPad appiPhone app
2.  Install the app on your iPad or phone.
3.  Launch the app, and it displays the dashboard screen.
To use this app, you need a  
Wi-Fi connection from your phone or iPad to your 
NETGEAR home network.
•Manage Wi-Fi settings and guest access for 
your home network.
• View a map of your network.
• Set up or manage Parental Controls.
• Use the traffic meter to check your Internet 
usage.
• With My Media, play media on devices on 
your network. 
						

							42
4
4.   NETGEAR genie ADVANCED Home
Specify custom settings
The ADVANCED screens are for advanced users who want to specify custom settings.This 
chapter contains the following sections:
•Setup Wizard 
•WPS Wizard 
•VPN Wizard 
•Setup Menu 
•ADSL Setup 
•WAN Setup 
•LAN Setup 
•Quality of Service Setup 
Some selections on the ADVANCED Home screen are described in separate chapters:
•USB Storage. See Chapter 5, USB Storage.
•Security. See Chapter 7, Security.
•Administration. See Chapter 8, Administration.
•Advanced Setup. See Chapter 9, Advanced Settings. 
						

							NETGEAR genie ADVANCED Home 43
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
Setup Wizard
The NETGEAR genie installation process is launched the first time you se\
t up the wireless 
modem router. After setting up the wireless modem router the first time, if you want t\
o 
perform this task again, you can run Setup Wizard from the Advanced tab of the genie.
1.  Select  Setup W
 izard.
2. Select either  Ye s or No, I want to configure the router myself . If you select No, you are 
taken to the Internet Basic Settings screen (see Internet Basic Settings on page  29). 
3.  If you selected 
 Yes, click Next. A  series  of  screens  are  displayed  as  the  router  discovers 
and processes your Internet connection. 
4.  Click  Next when prompted to advance to the next screen. 
						

							NETGEAR genie ADVANCED Home 44
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
The Setup Wizard searches your Internet connection for servers and proto\
cols to 
determine your ISP configuration. 
						

							NETGEAR genie ADVANCED Home 45
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
WPS Wizard
The WPS Wizard helps you add a WPS-capable client device (a wireless de\
vice or 
computer) to your network. On the client device, you have to either pre\
ss its WPS button or 
locate its WPS PIN.
To use the WPS Wizard:
1.  Select  ADV
 ANCED > WPS Wizard.  
2.  Click  Next. 
 The following screen lets you select the method for adding the WPS clien\
t (a 
wireless device or computer).
 
You can use either the push button or PIN method. 
3.  Select either Push Button or  PIN Number. 
• T
o use the push button method, either click the WPS button on this screen, or press 
the WPS button on the top of the wireless modem router. Within 2 minutes, go to\
 the 
wireless client and press its WPS button to join the network without entering a 
password. 
						

							NETGEAR genie ADVANCED Home 46
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
•
To use the PIN method, select the  PIN Number radio button, enter the client security 
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to jo\
in the network 
without entering a password.
The wireless modem router attempts to add the WPS-capable device. The WPS LED 
 on the top of the wireless modem router blinks green. When the wireless\
 modem 
router establishes a WPS connection, the LED is solid green, and the wir\
eless modem 
router WPS screen displays a confirmation message. 
4.  Repeat Step 2 and Step 3 to add another WPS client to your network.
VPN Wizard
The Wizard asks you series of questions that determine the IPSec keys an\
d VPN policies it 
sets up. The VPN Wizard sets the parameters for the network connection, Security \
Association, traffic selectors, authentication algorithm, and encryption. These parameters are  based on the VPNC recommendations. More information about the VPNC recom\
mendations 
is presented in the VPN Wizard summary page.
To use the VPN Wizard:
1.  Select  ADV
 ANCED > VPN Wizard .  
						

							NETGEAR genie ADVANCED Home 47
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
2. 
Click  Next. 
Enter the requested information:
•Connection name. Enter an appropriate name for the connection. 
 This name is not 
supplied to the remote VPN endpoint. Rather, it is used to help you manage the VPN 
settings.
• Pre-shared key . 
 The key has to be entered both here and on the remote VPN 
Gateway or the remote VPN client. This method does not require using a CA 
(Certificate Authority).
• VPN tunnel connection. 
 The wizard has to know if you are planning to connect to a 
remote gateway or setting up the connection for a remote client or compu\
ter to 
establish a secure connection to this device.
3.  Click  Next.
Enter the remote IP address of the gateway you want to connect to, or pr\
ovide the 
Internet name of the gateway. The Internet name is the fully qualified domain name, as 
set up in a Dynamic DNS service.
4.  Click  Next.
Enter the remote LAN IP address and subnet mask of the remote gateway.
•If this information does not match the LAN IP address and subnet mask in\
 the remote 
gateway

, the secure tunnel fails to connect.
• The IP address range used on the remote LAN has to be dif
 ferent from the IP address 
range used on the local LAN. 
						

							NETGEAR genie ADVANCED Home 48
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
5. 
Click  Next.
This screen shows the summary of the Wizard configuration with a link to\
 view the VPNC 
recommended parameters (click here to view the VPNC-recommended parameters).
6.  Click  Done. 
7. For information about how to add or modify VPN policies, see  VPN Policies on page 127.
Setup Menu
Select  ADVANCED > Setup to display the Setup menu. The following selections are 
available:
• Internet Setup. 
 This selection is a shortcut to the same Internet Basic Settings screen \
that you can access from the dashboard on the BASIC Home screen. See Internet Basic 
Settings on page   29.
• ADSL Setup. Internet (ADSL) setup. See ADSL Setup on page  49.
• W
ireless Setup . This selection is a shortcut to the same Wireless Settings screen that 
you can access from the dashboard on the BASIC Home screen. See Basic Wireless 
Settings on page   34.
• Guest Network. 
 This selection is a shortcut to the same Wireless Settings (for guest 
networks) screen that you can access from the dashboard on the BASIC Ho\
me screen. 
See Guest Networks on page  38. 
• W
AN Setup. Internet (WAN) setup. See  WAN Setup on page
  50.
• LAN Setup. Local area network (LAN) setup. See LAN Setup on page  53.
• QoS Setup. Quality of Service (QoS) setup. See Quality of Service Setup  on page
  56. 
						

							NETGEAR genie ADVANCED Home 49
 N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
ADSL Setup
The ADSL Settings screen lets you configure the multiplexing method and \
virtual circuit of 
your ADSL connection. The default parameters should be correct to match the system used 
by your ISP. 
Select  ADV
 ANCED > Setup > ADSL Settings.
•Multiplexing Method. Your ISP indicates whether your multiplexing method is 
VC-BASED or LLC-BASED.
• VPI, VCI. 
 Your ISP indicates which VPI and VCI combination is used for your service\
. 
						

							NETGEAR genie ADVANCED Home 50
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000 
WAN Setup
The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the 
maximum transmit unit (MTU) size, and enable the wireless modem router\
 to respond to a 
ping on the WAN (Internet) port. 
1.  Select  ADV
 ANCED > Setup > WAN Setup. 
2. The available settings and information in this screen are:
• W
AN Preference. Select your WAN preference: Auto-Detect, Must use DSL WAN, or 
Must use Ethernet WAN.
• Disable Port Scan and DoS Protection. DoS protection protects your LAN against 
denial of service attacks such as Syn flood, Smurf 

Attack, Ping of Death, Teardrop 
Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. This  feature should be disabled only in special circumstances. 
• Default DMZ Server . 
 This feature is sometimes helpful when you are playing online 
games and/or videoconferencing. Be careful when using this feature becau\
se it 
makes the firewall security less effective. See the following section,  Default DMZ 
Server, for more details.
• Respond to Ping on Internet Port. If you want the wireless modem router to 
respond to a ping from the Internet, select this check box. Use this onl\
y as a 
diagnostic tool because it allows your wireless modem router to be disco\
vered. Do not 
select this check box unless you have a specific reason.
• MTU Size (in bytes). 
 The normal MTU (maximum transmit unit) value for most 
Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. Fo\
r some 
ISPs, you might need to reduce the MTU. This change is rarely required, and should 
not be done unless you are sure that it is necessary for your ISP connec\
tion. See 
Change the MTU Size on page  51.