Netgear Dgn2200v4 N300 Wireless Adsl2 Plus Modem Router User Manual

Advanced Settings 91
 N300 Wireless ADSL2+ Modem Router DGN2200v4
open, what type of ports are open, and whether each open port is still a\
ctive for 
each IP address.
To refresh the information in the UPnP Portmap Table, click the Refresh button .
IPv6
You can use this feature to set up an IPv6 Internet connection type if ge\
nie does not detect it 
automatically.
To set up an IPv6 Internet connection type:
1.  Select  Advanced > 
 Advanced Setup > IPv6 .
2. In the Internet Connection Type list, select...

Advanced Settings 92
N300 Wireless ADSL2+ Modem Router DGN2200v4 
Auto Detect
To set up an IPv6 Internet connection through auto detection:
1. 
Select  Advanced > 
 Advanced Setup > IPv6.
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select Auto Detect.
The screen adjusts:
The modem router automatically detects the information in the following \
fields:
• Connection T
 ype. This field indicates the connection type that is detected.
• Router
’s IPv6 Address on WAN . This field...

Advanced Settings 93
 N300 Wireless ADSL2+ Modem Router DGN2200v4
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1. 
Select  Advanced > 
 Advanced Setup > IPv6 .
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select Auto Config.
The screen adjusts:
The modem router automatically detects the information in the following \
fields:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the modem router’s WAN (or...

Advanced Settings 94
N300 Wireless ADSL2+ Modem Router DGN2200v4 
•
Use DHCP Server . This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
6.  (Optional) Select the  Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the  modem router’

s LAN interface.
If you do not specify an ID here, the modem router generates one automat\
ically...

Advanced Settings 
95  N300 Wireless ADSL2+ Modem Router DGN2200v4
3. Configure the remote 6to4 relay modem router settings by selecting one of the following 
buttons:
•Auto. Your modem router uses any remote relay router that is available on the 
Internet. This is the default setting.
•Static IP Address. Enter the static IPv4 address of the remote relay router. This 
address is usually provided by your IPv6 ISP.
4. Specify how the modem router assigns IPv6 addresses to the devices on your home 
network...

Advanced Settings 96
N300 Wireless ADSL2+ Modem Router DGN2200v4 
The screen adjusts:
3. 
Configure the fixed IPv6 addresses for the WAN connection.
The following fields are included in this screen:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the modem 
router WAN interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway, which is 
supposed to be on the modem router’s WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6...

Advanced Settings 97
 N300 Wireless ADSL2+ Modem Router DGN2200v4
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1. 
Select  Advanced > 
 Advanced Setup > IPv6 .
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select DHCP.
The screen adjusts:
The modem router automatically detects the information in the following \
fields:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the modem router’s WAN (or Internet) interface. The...

Advanced Settings 98
N300 Wireless ADSL2+ Modem Router DGN2200v4 
•
Use DHCP Server . This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
6.  (Optional) Select the  Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the  modem router’

s LAN interface.
If you do not specify an ID here, the modem router generates one automat\
ically...

Advanced Settings 
99  N300 Wireless ADSL2+ Modem Router DGN2200v4
This is usually the name that you use in your email address. For example, if your main 
mail account is [email protected], then you would type JerAB in this field. Some ISPs (like 
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you 
log in. If your ISP requires your full email address, type it in this field.
4. In the Password field, enter the password for the ISP connection.
5. In the Service Name name...

Advanced Settings 100
N300 Wireless ADSL2+ Modem Router DGN2200v4 
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic that passes through the 
modem router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.  Click  Advanced > 
 Advanced Setup > Traffic Meter .
Scroll to view 
more settings
2. Select the  Enable Traffic Meter  check box.
3.  (Optional) Control the volume of Internet traf
 fic.
You can use either the traffic volume...