Netgear C7000 Nighthawk Ac1900 Wifi Cable Modem Router User Manual

							Manage Your Network 81
 Nighthawk AC1900
 WiFi Cable Modem  Router
Run the Ping Utility
Ping is an administration utility that tests whether a computer on the n\
etwork is reachable 
and measures the time it takes messages sent from the originating device\
 to reach a 
destination computer and return. 
To run a ping test:
1. Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://routerlogin.net  or http://192.168.0.1.
A login screen displays.
3.  Enter the modem router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Diagnostics.
In the Utility list, Ping  is selected by default.
5. Select the Ping Test Parameters  IPv4 or IPv6  radio button.
6.  Specify the following parameters for the ping utility:
• T
arget. The IP address of the ping target computer.
•Ping Size. 
 The size (in bytes) of the ping packet.
• No. of Pings. 
 The number of times to ping the target computer. The maximum 
number of pings is 128.
• Ping Interval . 
 The time between pings.
7.  Click the  Start T
 est button. 
The ping results display. 
						

							Manage Your Network 82
Nighthawk AC1900
 WiFi Cable Modem  Router 
8. To stop a ping test, click the  Abort Test button.
9.  T
o clear the results from the display, click the  Clear Results button.
Run the Traceroute Utility
To display the route and measure transit delays of packets across an IP, run the traceroute 
utility.
To run a traceroute test:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://routerlogin.net  or http://192.168.0.1.
A login screen displays.
3.  Enter the modem router user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration > Diagnostics.
5.  In the Utility list, select T
 raceroute.
6. Specify the following parameters for the traceroute utility:
• T
arget . The IP address or host name of the computer you are tracing.
• Max Hops. 
 The maximum number of hops to allow when tracing the route.
• Data Size. 
 The input the size (in bytes) of the packet.
• Base Port. 
 The port number to send the packet to.
• Resolve Host. Select On to resolve the host name to the IP address.
7.  Click the  Start T
 est button.  
						

							Manage Your Network 83
 Nighthawk AC1900
 WiFi Cable Modem  Router
The traceroute results display.
8.  T
o clear the results from the display, click the  Clear Results button.
Monitor Internet Traffic
Traffic metering allows you to monitor the volume of Internet traffic that passes through the 
modem router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Setup > Traffic Meter .
Scroll to view 
more settings
5. Select the Enable Traffic Meter  check box.
6.  (Optional) Control the volume of Internet traf
 fic.
You can use either the traffic volume control feature or the connection time control  feature: 
						

							Manage Your Network 
84 Nighthawk AC1900 WiFi Cable Modem Router 
•Select the Traffic volume control by radio button and then select one of the 
following options:
-No Limit. No restriction is applied when the traffic limit is reached.
-Download only. The restriction is applied to incoming traffic only.
-Both Directions. The restriction is applied to both incoming and outgoing traffic.
•Select the Connection time control radio button and enter the allowed hours in the 
Monthly limit field.
7. (Optional) If your ISP charges for extra data volume when you make a new connection, 
enter the extra data volume in MB in the Round up data volume for each connection by field.
8. In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the Restart Counter Now button.
9. In the Traffic Control section, specify whether the modem router should issue a warning 
message before the monthly limit of Mbytes or hours is reached. 
By default, the value is 0 and no warning message is issued. You can select one of the 
following to occur when the limit is attained:
•The Internet LED blinks green or amber. 
•The Internet connection is disconnected and disabled.
10. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
11. To update the Traffic Statistics section, click the Refresh button.
12. To display more information about the data traffic on your modem router and to change the 
poll interval, click the Traffic Status button.
View Devices Currently on the Network
You can view all computers or devices that are currently connected to your network.
To view devices on the network:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays. 
						

							Manage Your Network 85
 Nighthawk AC1900
 WiFi Cable Modem  Router
4. Select  Attached Devices.
The Wired Devices section lists devices that are connected to the modem \
router with 
Ethernet cables. The Wireless Devices section lists devices that are connected to the 
wireless network. The following information is displayed:
• Status. 
 The status of the device, Allowed or Blocked.
• Device Name. If the device name is known, it is shown here. 
• IP Address. 
 The IP address that the modem router assigned to this device when it 
joined the network. This number can change if a device is disconnected and rejoins 
the network.
• MAC Address. 
 The unique MAC address for each device does not change. The MAC 
address is typically shown on the product label.
5.  T
o update this screen, click the Refresh  button.
Manage the Modem Router Configuration File
The configuration settings of the modem router are stored within the mod\
em router in a 
configuration file. You can back up (save) this file to your computer, restore it, or reset it to the 
factory default settings.
Back Up Settings
To back up the modem router’s configuration settings:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are case-sensitive. 
						

							Manage Your Network 86
Nighthawk AC1900
 WiFi Cable Modem  Router 
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration >  Backup Settings.
5. Click the  Back Up button.
6.  Specify a
  location on your network.
A confirmation message displays.
7.  Click the  OK button.
A copy of the current settings is saved in the location you specified.
Restore Configuration Settings
To restore configuration settings that you backed up:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Administration >  Backup Settings.
5.  Click the  Browse button to find and select the cfg file. 
6.  Click the  Restore button.
The file is uploaded to the modem router and the modem router reboots.
WARNING:
Do not interrupt the reboot process. 
						

							Manage Your Network 
87  Nighthawk AC1900 WiFi Cable Modem Router
Erase the Current Configuration Settings
You can erase the current configuration and restore the factory default settings. You might 
want to do this if you move the modem router to a different network. (See 
Factory Settings on 
page 11 9).
To erase the configuration settings:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Administration > Backup Settings.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is 
password, and the LAN IP address is 192.168.0.1. DHCP is enabled.
View Wireless Access Points in Your Area
You can view wireless networks or access points, in your area and select and join a wireless 
network. 
To manage your wireless access point (AP):
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays. 
						

							Manage Your Network 88
Nighthawk AC1900
 WiFi Cable Modem  Router 
4. Select  ADVANCED > Administration > Wireless AP .
This screen displays the wireless access points in use in your area. 
View or Change the Modem Router Wireless Channel
Many countries and geographic locations have laws or guidelines about wh\
ich channels 
can be used. Depending on your location, some channels might not be avai\
lable. If many 
wireless networks at your location use the same channel as your wireless\
 network, you 
might experience interference. You can change the channel to avoid the interference.
To view or change your wireless channel:
1. Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://routerlogin.net  or http://192.168.0.1.
A login screen displays.
3.  Enter the  modem router  user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays. 
						

							Manage Your Network 89
 Nighthawk AC1900
 WiFi Cable Modem  Router
4. Select  ADVANCED > Administration > Wireless Channel .
The screen displays wireless channels in use in the 2.4 GHz WiFi band. Your network is 
shown in blue. Yellow shows other networks in your area. 
5.  T
o view wireless channels in use in the 5 GHz WiFi band, select the  5 GHz a/n radio button.
6.  T
o change the wireless channel, click the  Change Channel button.
The Wireless Setup screen displays.
7.  In the Channel  list, select a dif
 ferent channel setting.
8.  Click the  Apply button.
Your changes take effect.
Dynamic DNS
Internet service providers (ISPs) assign numbers called IP addresses t\
o identify each 
Internet account. Most ISPs use dynamically assigned IP addresses. This means that the IP 
address can change at any time. You can use the IP address to access your network 
remotely, but most people don’t know what their IP addresses are or when this\
 number 
changes.
To make it easier to connect, you can get a free account with a Dynamic D\
NS service that  lets you use a domain name to access your home network. 
 To use this account, you must set 
up the modem router to use Dynamic DNS. Then the modem router notifies the Dynamic 
DNS service provider whenever its IP address changes. When you access yo\
ur Dynamic 
DNS account, the service finds the current IP address of your home netwo\
rk and 
automatically connects you. 
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic 
DNS service does not work because private addresses are not routed on th\
e Internet. 
						

							Manage Your Network 90
Nighthawk AC1900
 WiFi Cable Modem  Router 
Specify a DNS Account
To set up Dynamic DNS in the modem router:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login screen displays.
3.  Enter the user name and password.
The user name is  admin. 
 The default password is password . The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4.  Select  ADV
 ANCED > Advanced Settings > Dynamic DNS .
5. Select the  Use a Dynamic DNS Service  check box.
6.  In the Service Provider  list, select your service provider from the list.
7.  In the Host Name  field, type the host name (sometimes called the domain name) for your\
 
account.
8.  In the User Name field, enter the user name for your account.
9.  In the Password (6-32 characters) field, type the password for your DDNS account.
10.  Click the  Apply button.
Your changes are saved.
11.  T
o verify that your Dynamic DNS service is enabled in the  modem router, click the Show 
Status button.
A message displays the Dynamic DNS status.
Change the Dynamic DNS Settings
To change your settings:
1.  Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.