Netgear C3000 N300 Wifi Cable Modem Router User Manual

Specify Network Settings 51
 N300 WiFi Cable Modem Router Model C3000
4. 
Select  ADVANCED > Setup > LAN Setup .
5. Specify the range of IP addresses that the modem router assigns:
a. In the  Starting IP 
 Address field, type the lowest number in the range.
This IP address must be in the same subnet as the modem router.
b.  In the  Ending IP 
 Address field, type the number at the end of the range of IP 
addresses.
This IP address must be in the same subnet as the modem router.
6.  Click the  Apply...

Specify Network Settings 
52 N300 WiFi Cable Modem Router Model C3000 
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup.
5. In the Address Reservation section of the screen, click the Add button. 
6. In the IP Address field, type the IP address to assign to the computer or server. 
Choose an IP address...

Specify Network Settings 
53  N300 WiFi Cable Modem Router Model C3000
To delete a reserved address entry:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and 
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Setup > LAN Setup....

Specify Network Settings 
54 N300 WiFi Cable Modem Router Model C3000 
The WPS process automatically sets up your wireless computer with the network 
password when it connects. The modem router WPS screen displays a confirmation 
message. 
Specify Basic WiFi Settings
The modem router comes with preset security. This means that the WiFi network name 
(SSID), network key (password), and security option (encryption protocol) are preset in the 
factory. You can find the preset SSID and password on the modem...

Specify Network Settings 55
 N300 WiFi Cable Modem Router Model C3000
4. 
Select  Wireless.
5. In the Region list, select your region. In some locations, you cannot change this set\
ting.
6.  (Optional) Select the Enable W
 ireless Isolation checkbox.
When wireless isolation is enabled, computers and devices that join the \
network have 
access to the Internet, but not to each other
 .
7.  T
o turn off the wireless radio, scroll down and clear the  Enable Wireless Gateway Radio 
check box.
If you clear...

Specify Network Settings 
56 N300 WiFi Cable Modem Router Model C3000 
Up to 145 Mbps is the default setting, which allows 802.11n and 802.11g wireless 
devices to join the network. g & b supports up to 54 Mbps. The 300-Mbps setting allows 
802.11n devices to connect at this speed.
12. Click the Apply button.
Your settings are saved.
If you connected wirelessly to the network and you changed the SSID, you are 
disconnected from the network.
13. Make sure that you can connect wirelessly to the network...

Specify Network Settings 57
 N300 WiFi Cable Modem Router Model C3000
WPA2-PSK [AES] radio button is selected so that new or old computers and wireless 
devices can connect to the WiFi network by using either WPA2 or WPA security. 
The  Passphrase field displays.
6.  In the Passphrase field, enter the network key (password) that you want to use. 
It is a text string from 8 to 63 characters.
7.  W
rite down the new password and keep it in a secure place for future refe\
rence.
8. Click the  Apply button....

Specify Network Settings 
58 N300 WiFi Cable Modem Router Model C3000 
5.Select any of the following wireless settings:
•Enable Guest Network. When this check box is selected, the guest network is 
enabled, and guests can connect to your network using the SSID of this profile.
•Enable SSID Broadcast. If this check box is selected, the wireless access point 
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt 
the correct SSID for connections to this access point.
•Allow...

Specify Network Settings 59
 N300 WiFi Cable Modem Router Model C3000
Enable or Disable the Wireless Radio
If you used the WiFi On/Off button to turn off the wireless radio, you can’t log in to the modem 
router to 
turn them back on. You must press the WiFi On/Off  button again for two seconds to 
turn the wireless radio back on.
To enable or disable the wireless radio:
1.  Launch a web browser from a computer or wireless device that is connecte\
d to the 
network.
2.  T
ype  http://routerlogin.net  or...

Specify Network Settings 
60 N300 WiFi Cable Modem Router Model C3000 
Specify WPS Settings
Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi 
password.
To specify WPS Settings:
1. Launch a web browser from a computer or wireless device that is connected to the 
network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name...