NEC Wt610 Projector User Manual

114
6. Using On-Screen Menu
Advanced menu
Network Type (required for wireless only)
Site Survey:
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
To select an SSID, highlight the SSID and use the SELECT   to select “OK” and press the ENTER button.
 : access point
 : Ad Hoc PC
 : WEP enabled
NOTE: You cannot connect to a device with the SSID for Channel 14 because it is not displayed in the list.
SSID (Network name):
Enter an identifier (SSID) for wireless...

115
WEP (required for wireless only)
Select this option whether using the WEP (Wired Equivalent Privacy) key for encryption or not. To use encryption,
specify WEP key.
Disable .................. Will not turn on the encryption feature. Your communications may be monitored by someone.
64bit ...................... Uses 64-bit datalength for secure transmission.
128bit .................... Uses 128-bit datalength for secure transmission. This option will increase privacy and security when com-
pared to use...

116
Using Software Keyboard to enter an encryption key
1. Select one of Key 1, Key 2, Key 3 and Key 4 and press the ENTER button.
The software keyboard will be displayed.
2. Use the SELECT 
 or   button to select one key and press the ENTER button.
3. After finishing entering the WEP key, use the SELECT 

 or  button to select [OK] and press the
ENTER button.
The software keyboard will disappear.
Domain
Host Name ............ Type in a hostname. Up to 60 alphanumeric characters can be used.
Domain...

117
Mail
Alert Mail:
Checking this box enables Alert Mail feature.
This option notifies your computer of an error message via e-mail when using wireless or wired LAN. The error
message will be noticed when the projector lamp has reached the end of its usable life or an error occurs in the
projector.
Sample of a message sent from the projector:
The lamp is at the end of its usable life. Please replace the lamp.
Projector Name: X X X X
Lamp Hour Meter: xxxx [H]
Projector Usage: xxxxxx [H]
Senders Address:...

118
Specifying a Name for Your Projector [Projector Name]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric
characters can be used. After entering a name, select “OK” and press the ENTER button.
Using Software Keyboard
1 to 0 and
Characters ....... Use to type in password or keyword.
MODE .................... Selects one of three modes for alphabet and special characters.
SP ......................... Inserts a space
BS ............................

119
6. Using On-Screen Menu
Selecting Power-saving in Standby Mode
The projector has two standby modes: Normal and Power-saving.
Power-saving mode is the mode that allows you to put the projector in the power-saving condition which consumes
less power than the Normal mode. The projector is preset for Normal mode at the factory.
NOTE:
•The MONITOR OUT function is not available during Power-saving mode.
•Control through the PC Control connector and LAN mode is not available during Power-saving mode. For PC...

120
Options
Setting Auto Adjust [Auto Adjust]
This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise
and stability. You can automatically make adjustment in two ways: Normal and Fine.
Off ......................... The RGB image will not be automatically adjusted.
You can manually optimize the RGB image.
Normal .................. Default setting. The RGB image will be automatically adjusted. Normally select this option.
Fine ..........................

121
Enabling High Speed Fan Mode [Fan Mode]
This option allows you to select two modes for fan speed: Auto mode and High speed mode.
Auto ...................... The built-in fans automatically run at a variable speed according to the internal temperature.
High ...................... The built-in fans run at high speed.
When you wish to cool down the temperature inside the projector quickly, select “High”.
NOTE: Select “High” mode if you continue to use the projector for consecutive days.
Selecting...

122
Selecting Signal Format [Signal Select]
Computer
Allows you to set Computer to automatically detect an incoming RGB or component source such as a computer
or DVD player. However there may be some RGB and component signals that the projector is
unable to detect. In this case, select RGB or Component.
Select Scart in Computer for the European Scart signal.
DVI (ANALOG)
Allows you to choose “DVI (ANALOG) for an RGB source such as a computer, or Component for a component
video source such as a DVD...

123
Tools
Selecting the ChalkBoard [ChalkBoard]
This option displays the ChalkBoard tool bar. The ChalkBoard function can also be used with the electronic pen on
WT615.
See page 47.
Selecting Board Color [Board Color]
This option allows you to select a board color of ChalkBoard.
6. Using On-Screen Menu