NEC Vt695 Projector Specifications

							Easy to use and at the right price, the VT Series projectors provide all the 
essential features that you need to connect with your audience.
ESSENTIAL FEATURES FOR EASE OF USE.
°Plug and playintuitive setup and operation.
°
Quick start uplets you begin presenting in seconds.
°
Bright imageseasily viewed in any application.
°
Versatile colorcoded connectionsto computer, video sources and external monitor.
°
Lightweight designfor easy transport.
°
Automatic keystone correction SquareShot™ technologyinstantly projects a square
image even when the projector is set up at a steep offset angle to the screen.
°
Autosense™intuitively syncs the projector with most computer signals and features one
touch image optimization. 
°
One touch source changes and complete menu controlusing the intuitive projector keypad.
VERSATILE FEATURES AND POWERFUL PERFORMANCE.
°With XGA native resolution, high brightness up to 2500 lumens and patented NEC
technologies like Advanced AccuBlend™ and VORTEX™ Technology, 
the VT Series
displays impressive image quality.
°Vertical position of the image can be adjusted when the Cinema aspect (wide screen)
ratio
is in use.
°
Builtin wall color correction presetsprovide for adaptive color tone correction to display
properly on nonwhite surfaces.
°Focus in on details with 
up to 400% image magnification.
°Easy remoteallows you to adjust lamp mode, aspect ratio, volume and image all with the
touch of a button.
°
Optional IR receivercan be connected to computer for remote mouse control.
°
Variable audiooutenables remote control to be used to adjust volume of selfpowered
external speakers that are connected to the projector.
°
Powerful 5watt speakerprovides volume needed for large rooms.
°
Dual computer inputs,including one DVII, ensures quick switching between presentations.
SAVE MONEY, RESOURCES AND YOUR PROJECTOR.
°The VT Series projectors are extremely affordable.
°Extended lamp lifewith Ecomode™ technology that increases lamp life up to 3,000 hours.
°
Nearly silent operationwith noise level as low as 29dB
°
Automatic timercan be set to shut off the projector at selected time intervals.
°
Power managementenables projector to automatically turn off when an incoming signal is
not detected from any of the inputs.
°
Password protectionrestricts unauthorized use of projector
°
Cabinet control lock settingenables user to deactivate buttons on cabinet to prevent
unwanted changes to projector settings.
LONG LAMP LIFE
EASY TO USE
AUTOSENSE TECHNOLOGY
MONITOR OUTPUT 
COLOR MANAGEMENT
AUTOMATIC KEYSTONE
CORRECTION
5WATT SPEAKER
DVII INPUT
VARIABLE AUDIO OUT
Everything should be this easy
VT595 and VT695 digital projectors. 
						

							NEC 090605
For more information, call 1.800.NEC.INFO 
or visit www.necvisualsystems.com
NEC is a registered trademark of NEC Corporation.
All other trademarks arethe property of their respective owners.
All specifications subject to change without notice.
NEC Corporation of America
Visual Systems Division
1250 Arlington Heights Rd., Suite 400
Itasca, IL 601431248
OPTICALDisplay Technology 0.6” LCD
Resolution Native:  XGA 1024 x 768
Maximum: UXGA 1600 x 1200
Light Output (lumens) VT595 2000 normal / 1600 eco
VT695 2500 normal / 1900 ecoContrast Ratio 600:1
Lamp Type VT595 190W DC/150W eco
VT695 200W DC/150W ecoLamp Life (up to)  2000 hours normal / 3000 hours ecoScreen Size (diagonal) 21 – 300 in, .537.6 mThrow Ratio 1.5 – 1.8 Projection Distance 2.3 to 36.4 ft, .7 to 11.1 mProjection Angle 8.3 – 8.6º tele / 9.9 – 10.3º wide
Lens Zoom 1.0 to 1.2
Focus Manual
F#, f# F=1.7 to 2.07 mm, f=18.9 to 22.7mmKeystone Correction  Automatic or manual +/ 30º
SIGNAL COMPATIBILITY/CONNECTIVITYScan Rate Horizontal 15 to 100 kHz Vertical 50 to 120 Hz
Supported Video NTSC, NTSC4.43, PAL, PAL60, PALM, PALN, SECAM
Standards
SD/HD Video Signal 1080i, 720p, 576p, 576i, 480p, 480i,Y/Cb/Cr component (with optional adapter – ADPCV1E)
CompatibilityPC Signal Compatibility  VGA, SVGA, XGA, SXGA, SXGA+, UXGAMacintosh Compatibility Yes
Input/Output Terminals RGB 1 (analog)  15 pin
RGB2 DVII (digital and analog)
Video 1 RCA
Video 2 SVideo
Audio 1 L/R RCA (shared by video sources)
Audio 2 1/8 inch stereo (shared by computer inputs)Audio Out Variable audio out
Monitor Out YesAudio 5Watt speakerExternal Control RS232, IRSync CompatibilitySeparate Sync / Composite Sync / Sync on G
ELECTRICALPower Req.  100  240VAC, 50 / 60HzInput Current3.1 / 1.3APower Consumption 270W / 220W (VT595), 280W / 215W (VT695)
MECHANICALInstallation Orientation  Floor / Front, Floor / Rear, Ceiling / Front, Ceiling / RearDimensions (WxDxH) 12.2  x 10.2 x  4.4 in, 309 x 258 x 112 mmNet Weight  6.4 lbs, 2.9 kgFan Noise 35 dB normal / 29 dB ecoRegulations USA UL 1950 FCC Class B, Canada CSA950 (CUL)
ENVIRONMENTALOperational Temp 41° to 95°F / 5° to 40°C Humidity2080% noncondensingStorage14° to 122°F / 10° to 50°C
AccessoriesIRRCVR IR receiver enables PJ remote to control PC and MAC functionsWPA001 802.11b/g wireless adapterSPKR30 Amplified 30 watt speaker SC200 Security cable attaches to projector lock slot ADPCV1E
Component video to VGA adapterCasesLEATHERCASE Leather case with compartments for laptop and projectorLEATHERROLLER Leather rolling case for laptop and PJ, fits in most airplane storage binsVT70ATAAirtight molded plastic shipping case for projectorInstallation VL80CM
Ceiling mount with adapter plate designed for VT90 Series projectorsNP01UCM Universal ceiling mount for projectors weighing less than 40 poundsADJ0060096 to 9 inch adjustable extension column for use with projector mountADJ001201812 to 18 inch adjustable extension column for use with projector mountADJ02032to 3 foot adjustable extension column for use with projector mountADJ0305 3 to 5 foot adjustable extension column for use with projector mountSCP100 Adjustable suspended ceiling plate for use with ceiling mountReplacement PartsVT80LPReplacement lamp for VT49VT85LPReplacement lamp for VT490, VT590, VT595, VT695RMTPJ21Replacement remote controlPWRCRDVT70 Replacement power cordRGBCBLPJPX Replacement RGB signal cableWarranty ProgramsVLNPL01Extends term of parts and labor warranty to include 3 years laborVLIC03Extends term of InstaCareservice program to 3 yearsVLMTC02 3 year international service program NECECO Projector recycling program, disposal certificateVTP04 Extends term of VT90 Series parts warranty to 4 yearsVTPL04Extends term of VT90 Series parts and labor warranty to 4 years
UNIQUE FEATURESAdvanced AccuBlend Ensures detailed images when nonnative resolution sources are connected to the projector.
Autosense Automatically syncs with any computer signal and 
features one touch image optimization.
VORTEX™ Technology Plus  Breakthrough image processing technology improves 
white level, color accuracy, dynamic range and varying 
levels of black in an image.
EcoMode™ Technology Extends lamp life, lowers audible noise and reduces total
cost of ownership.
Builtin Wall Color Correction Presets provide for adaptive color tone correction to 
display properly on nonwhite surfaces.Image Magnification64step image magnification with location control.
Sleep Timer Count down timer can be set to automatically turn off 
the projector.5Watt Speaker Provides volume needed for larger rooms
WARRANTYRegistered owers receive a 3year limited warranty including InstaCare. Includes three
year limited warranty on parts and one year limited warranty on labor. The lamp is
covered for one year or 500 hours  whatever comes first. InstaCare provides the
original owner one year of either limited 3 business day repair/returnor next business
day exchange.
IN THE BOXCarrying case, carrying handle for projector, remote control,  battteries, power cord,
RGB signal cable, lens cap, user’s manual on CDROM, quick start guide, product
registration card, DVII – VGA adapter
Everything should be this easy
VT595 and VT695 digital projectors.
1
0.2”(
258 mm)
1
2.2”(
309 mm)
4.4”(
112 mm)
project or tradeinpr ogr am