NEC Vt676 Projector User Manual

64
7. Appendix
 Optional Presentation Remote Control Kit (PR52KIT)
Part Names and Functions of the Remote Control
1. Infrared Transmitter/Laser  Pointer
Transmits an infrared signal when any button other
than LASER is pressed.
Direct the remote control toward the remote sensor
on the projector cabinet.
Beams a laser light when the Laser button is pressed.
CAUTION:
* Do not look into the laser pointer while it is on.
* Do not point the laser beam at a person.
2. Remote Jack
Not available on this model....

65
7. Appendix
8. POINTER Button
Not available on this model.
9. PAGE UP/DOWN Buttons*
Use these buttons to operate your computer with the
supplied remote mouse receiver. You can use these
buttons to scroll the viewing area of the window or to
move to the previous or next slide in PowerPoint on
your computer.
10. MENU Button
Displays the menu for various settings and adjust-
ments.
11. Mouse Button
In Mouse mode*, this button works as your computer
mouse.
In Projector mode, this button is used for...

66
7. Appendix
30Ã
30Ã
30Ã 30Ã
Battery Installation
1Remove the battery cover.
NOTE: Do not pull the battery
cover by force. Doing so can
result in it coming off.
2Remove both old batteries and
install new ones (AAA). Ensure
that you have the batteries po-
larity (+/ –) aligned correctly.3Slip the cover back over the bat-
teries until it snaps into place.
NOTE: Do not mix different types of
batteries or new and old batteries.
Remote sensor on projector cabinetRemote control
7m/22 feet 7m/22 feet
•The...

67
7. Appendix
Using the Laser Pointer
You can use the laser to draw your audiences attention to a red dot that you can place on any object.
CAUTION:
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
• Do not allow children to use the laser pointer.
Press and hold the LASER button to activate the laser pointer.
AC IN
Z
O
O
MFOCU
S
LASER
To disable the laser pointer, set the function switch to “Off ”.
Decide whether to enable or disable laser, then set the...

68
No image is displayed from your PC or video equipment to the
projector.
Still no image even though you connect the projector to the PC
first, then start the PC.
Enabling your notebook PC’s signal output to the projector.
•A combination of function keys will enable/disable the ex-
ternal display. Usually, the combination of the “Fn” key along
with one of the 12 function keys turns the external display
on or off.
No image (blue background, logo, no display).
Still no image even though you press the AUTO...

69
7. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is used
Projector
Model number:
Serial No.:
Date of purchase:
Lamp operating time (hours):
Lamp Mode: Normal   Eco
Information on input signal:
Horizontal synch frequency [          ] kHz
Vertical synch frequency [          ] Hz
Synch polarity H  (+)   (–)
V  (+)   (–)
Synch type Separate   Composite
 Sync on Green
STATUS Indicator:
Steady light Orange  ...

70
7. Appendix

 TravelCare Guide
TravelCare - a service for international travelers
This product is eligible for TravelCare, NECs unique international war-
ranty.
Please note that TravelCare coverage differs in part from coverage un-
der the warranty included with the product.
Services offered with TravelCare
This warranty allows customers to receive service on their product at
the NEC and NEC-designated service stations in the countries listed
herein when temporarily traveling internationally for...

71
7. Appendix
Lenso Communication Co., Ltd.
Address: 292 Lenso House 4, 1st Floor, Srinakarin Road,
Huamark, Bangkapi, Bangkok 10240, Thailand
Telephone: +66 2 375 2425
Fax Line: +66 2 375 2434
Email Address: [email protected]
WEB Address:http://www.lenso.com
(Regions Covered)
Thailand
ABBA Electronics L.L.C.
Address: Tariq Bin Ziyad Road, P.O.Box 327, Dubai,
United Arab Emirates
Telephone: +971 4 371800
Fax Line: +971 4 364283
Email Address: [email protected]
(Regions Covered)
United Arab Emirates...

72
7. Appendix
TO: NEC or NECs Authorized Service Station:
FM:
(Company & Name with signature)
Dear Sir (s),
I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your
following conditions, and also the Service fee will be charged to my credit card account, if I dont return the Loan units within the
specified period. I also confirm following information is correct.     Regards.
Application Sheet for TravelCare Service Program
P-1/...

73
7. Appendix
5. Loan Service Charges and Conditions:
Upon acceptance of this NEC Projector, Customer agrees to assume
liability for this loan unit.
The current cost of use of this loan unit is $200.00 USD for 12 calendar
days.
If Customer does not return the unit within the 12 calendar days, Cus-
tomer will be charged the next highest cost up to and including the full
list price to Credit Cards, which price will be informed by NEC Autho-
rized Service Stations. Please see the attached listing of...