NEC Terminal DT300 Users Guide

1. 
 
 
 
SOFT KEYS 
The  Soft  Keys  on  the  DT  Series  provide  a  set  of  
functions  on  the  LCD  that  adapts  to  the  changing  state  of  the  telephone.  W hile  default  Soft  Key  settings  are  provided,   desired   functions   can   be   assigned   to  
individual  stations  as  required.  The  Soft  Keys,  at  the  bottom  of  the  LCD,  can  display  the  names  of  available  functions,    names    of    user-assigned    functions    and  
names  of  functions  assigned  by  a...

1.  
 
 
 
 
The  following  shows  the  default  display  patterns  of 
BUSY 
 
BUSY 2000 
(1) 4:26 PM      TUE 13   APR 2004 
MUTE HSET RLS >>> 
Push >>> 
BUSY 2000 
(2) 4:26 PM      TUE 13   APR 2004 
S&R >>> 
 
CONNECTION 
2000 
4:26 PM      TUE 13   APR 2004 
MIC DND >>> 
 
CONSULTATION HOLD 
 
TRANSFER 2000 
4:26 PM      TUE 13   APR 2004 
MIC CONF >>> 
 
 
Soft Key Features 
When  the  Soft  Key  corresponding  to  a  desired  feature 
name  is  operated,  the  selected  feature  name  starts  to...

1. 
 
 
 
 
MWSET (Message Waiting - Set) 
Allows  a  station  to  set  a  Message  Waiting  indication  or  lamp. 
 
HOLD (Call Hold) 
Permits  a  station  user  to  hold  a  call  in  progress  and  to return to the previously held call. 
 
MWOFF (Message Waiting - Cancel) 
Allows  a  station  to  cancel  a  Message Waiting  indication or lamp. 
 
FDB (Call Forwarding – Busy Line) 
Permits a call to a busy station to be immediately forwarded 
to a predesigned station. 
 
FDA (Call Forwarding – All...

1. 
 
 
 
 
A camp-on indication tone is sent to the busy station, and 
the user can use a switchhook flash to answer the second 
call. 
 
CB (Call Back) 
Provides  the  ability  for  a  calling  station  to  set  a  CALL BACK.    The  calling  station  will    be  rung  as  soon  as  the 
busy station becomes available. 
 
SIG (Manual Signaling) 
Permits  station  users  to  send  a  one-second  ring  to  a predetermined  station.  If  the  signaled  station  is  ringing from   another    call,    the...

 
 
 
 
SETUP WITH UP/DOWN KEY •  TO ADJUST RINGER TONE 
DT300 Series 
•  TO ADJUST HANDSET RECEIVER Press Up/Down ( or / ) key during ringing. 
VOLUME DT300 Series 
Press Up/Down ( or / ) key in the off-hook 
status or during the call.  RING  
LCD indication for North America, Latin America, Asia,  
 Middle East and Russia  
•  TO ADJUST LCD CONTRAST  
DT300 Series  
HANDSET Press Up/Down ( or / ) key in the on-hook 
status.  
LCD indication for Australia  
 
 
HANDSET LCD 
 
 
•  TO ADJUST SPEAKER...

 
 
 
 
SETUP WITH FEATURE KEY 
 
•  MICROPHONE ON/OFF  DT300 Series 
LED on Mic key shows the status of the built-in 
microphone. 
Press  soft  key  associated  with  the  MIC  Display  or  
press Feature and 1 key. 
 
 
•    TO  CHANGE  HANDSET  RECEIVER  
 VOLUME DT300 Series 
Press Feature and 3 key. The LCD displays the 
selected tone number (n=1 ~ 17). 
 
RINGER TONE n 
4:26 PM      TUE 13   APR 2004 
 
 
No. Frequency (Hz) Modulation (Hz) 
1 520/660 16 
2 520/660 8 
3 1100/1400 16  
 Handset...

 
 
 
 
 
•  TO ADJUST TRANSMISSION/RECEIV- 
ING VOLUME DT300 Series 
Handset volume can be changed. 
 
Press Feature and 4 key. The LCD displays the 
current volume. 
 
T/R VOL. SMALL 
4:26 PM      TUE 13   APR 2004 
 
 
Press Feature and 4 key again to alternate 
between Small and Large volume. 
 
T/R VOL. LARGE 
4:26 PM      TUE 13   APR 2004 
 
 
•  TO ACTIVATE HANDS-FREE DT300 Series 
To set hands-free on: 
Press Feature and 5 key. The LCD displays: 
 
HANDS FREE ON 
4:26 PM      TUE 13   APR 2004...

 
 
 
 
 
 
 
Direct   Dial   Pad      ON  
4:26 PM      TUE 13   APR 2004  
 
 
Direct   Dial   Pad      OFF  
4:26 PM      TUE 13   APR 2004  
 
 
Note:   W hen this feature is ON, the user may initiate a  
 call by immediately dialing the number and the  
 station will go hands-free off-hook automatically.  
 Please note when the features on the following  
 pages are used in conjunction with Dynamic Dial  
 Pad, that the user does not have to press the  
 Speaker key or lift the handset to receive...

 
 
 
 
SETUP WITH MENU KEY FOR 
DT300 SERIES 
•  TO CHANGE RINGER TONE VOLUME 
DT300 
The  procedure  below  shows  how  to  change  the  volume 
of ringer tone. 
 
While indicating the current time on LCD, press 
Menu key to open the Menu screen. 
 
Select 3 Setting and then press (Enter), 
(Right-cursor) or OK soft key. (or press 3 key.) 
 
[Menu] 
1 Call History 
2 Directory 
3 Settings 
Back OK 
 
 
Select 1 Ring Volume and then press 
(Enter), (Right-cursor) or OK soft key. (or 
press 1 key.)...

 
 
 
 
•  TO ENABLE/DISABLE OFF-HOOK 
RINGING DT300 
 
The procedure below shows how to 
 
While indicating the current time on LCD, press 
Menu key to open the Menu screen. 
 
Select 3 Setting and then press (Enter), 
(Right-cursor) or OK soft key. (or press 3 key.) 
 
[Menu] 
1 Call History 
2 Directory 
3 Settings 
Back OK 
 
Select 2 Offhook Ring and then press 
(Enter), (Right-cursor) or OK soft key. (or 
press 2 key.) 
 
[Settings] 
1 Ring Volume 
2 Offhook Ring 
3 Back Light 
4 Headset Ring 
5...