Home > NEC > Television > NEC Px 50xr6 Operation Manual

NEC Px 50xr6 Operation Manual

Here you can view all the pages of manual NEC Px 50xr6 Operation Manual. The NEC manuals for Television are available online for free. You can easily download all the documents as PDF.

Page 1

Operation Manual
 (Enhanced split screen Model)
Printed in JapanARE1457-A
(Enhanced split screen Model)
Operation Manual
Betriebshandbuch
Mode d'emploi
Manual de funcionamiento
Manuale d'uso
Руководство по эксплуатации
Bruksanvisning
İşletim Elkitabı
δηγίες 	ρήσηςNEC and the NEC logo are registered trademarks of
NEC Corporation
Printed on recycled paper
 

Page 2


				            

Page 3

ENGLISH
Operation Manual
(Enhanced split screen Model)
For the specifications of your plasma
monitor, refer to “Model Information”.
 

Page 4

En-2
Precautions
Please read this manual carefully before using your plasma monitor and
keep the manual handy for future reference.
       CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns the user that uninsulated voltage
within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any
kind of contact...

Page 5

En-3
Contents
Important Information..................................En-2
Contents......................................................En-3
Contents of the Package........................................En-3
Options..............................................................En-3
Installation..................................................En-4
Ventilation Requirements for enclosure mounting......En-4
Cable Management..............................................En-5
Using the remote...

Page 6

En-4
50 mm (2)Wall
Wall 50 mm (2)
50 mm (2)
50 mm (2)
50 mm (2)
You can attach your optional mounts or stand to the plasma monitor in one of the following two ways:
* While it is upright. (See Drawing A)
* As it is laid down with the screen face down (See Drawing B). Lay the protective sheet, which was wrapped around the
monitor when it was packaged, beneath the screen surface so as not to scratch the screen face.
* Do not touch or hold the screen face when carrying the unit.
• This device cannot be...

Page 7

En-5
ON/STANDBY
Approx.
7 m / 23 ft 
Using the remote control
Battery Installation and Replacement
Designated batteries:
Please use size AAA (R03) or AAA (LR03).
Insert the 2 “AAA” batteries, making sure to set them in
with the proper polarity.
1. Press and open the cover.
Operating Range
* Use the remote control within a distance of about 7 m/ 23
ft. from the front of the monitor’s remote control sensor
and at horizontal and vertical angles of up to approximately
30°.
* The remote control operation may...

Page 8

En-6
MENU INPUT/ EXITVOLUMEON/STANDBY
MENUINPUT / EXITVOLUMEON/STANDBY
4567132
Front View
Part Names and Function
Note: This plasma monitor has the capasity to display images when connected to European DVD players with a SCART
output signal, which is RGB with composite sync.
Your dealer can supply a special SCART cable, which will enable you to use the RGB with composite sync signal.
To obtain the special cable as well as for further information, please contact your dealer.
qPower
Turns the monitor’s...

Page 9

En-7
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the 
 (positive) speaker wire to the
 EXT SPEAKER terminal and the  (negative)
speaker wire to the 
 EXT SPEAKER terminal on
both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual.
CVIDEO1, 2 (RCA, S-Video)
Connect VCR’s, DVD’s or Video Cameras, etc. here.
DAUDIO1, AUDIO2, AUDIO3
These are audio input terminals.
The input is selectable. Set...

Page 10

En-8
Rear View/ Terminal Board
50XR6
HDMI, the HDMI logo and High-Definition Multimedia Interface are 
trademarks or registered trademarks of HDMI Licensing LLC.
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the 
 (positive) speaker wire to the
 EXT SPEAKER terminal and the  (negative)
speaker wire to the 
 EXT SPEAKER terminal on
both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual....
Start reading NEC Px 50xr6 Operation Manual

Related Manuals for NEC Px 50xr6 Operation Manual

All NEC manuals