NEC Projector Vt45 User Manual

							LCD Projector
User’s Manual
Printed in Japan
7N8P0562
NEC VT45 User’s Manual
VT_H1-401.9.17, 4:19 PM 1
Black 
						

							LIMITED WARRANTYExcept as specified below, the warranty that may be provided by the
dealer covers all defects in material or workmanship in this product.
The following are not covered by the warranty:
1. Any product on which the serial number has been defaced, mod-
ified or removed.
2. Damage, deterioration or malfunction resulting from;
a. Accident, misuse, abuse, neglect, fire, water, dust, smoke, light-
ning or other acts of nature, unauthorized product modification,
or failure to follow instructions supplied with the product.
b. Repair or attempted repair by non-authorized persons.
c. Any shipment of product (claim must be presented to the car-
rier).
d. Removal or installation of the product.
e. Any other causes which do not relate to a product defect.
3. Cartons, carrying cases, batteries, external cabinets, CDROM, or
anyaccessories used in connection with the product.
4. Removal or installation charges.
5. Cost of initial technical adjustments (set-up), including adjustment
of user controls. These costs are the responsibility of the dealer
from whom the product was purchased.
6. Payment of shipping charges.
GARANTIE LIMITEEMis à part les point indiqués ci-dessous, la garantie pouvant être
couverte par le revendeur comporte l’ensemble des défauts se
rapportant au matériel ou aux travaux d’assemblage sur ce produit.
Les points suivants ne sont pas couverts par la garantie:
1. Les produits dont les numéro de série a été effacé, modifié ou retiré.
2. Dommages, dégâts ou dysfonctionnement suite à;
a. Un accident, mauvaise utilisation, abus, négligences, incendies,
dégats dûs aux eaux, à la poussière, à la fumée, aux éclairs ou
autres phénomènes naturels, à une modification non autorisée
du produit, ou à la non-conformité aux instructions fournies avec
le produit.
b. Réparation ou tentative de réparation par des personnes non
autorisées.
c. Toute expédition du produit (les plaintes doivent être adressées
à la société de frêt).
d. Démontage ou installation du produit.
e. Toute autre cause ne se rapportant pas à un défaut du produit.
3. Les cartons, boîtes, piles, caissons externes, CDROM, ou tout au-
tre accessoire utilisé avec ce poduit.
4. Prix de démontage ou d’installation.
5. Coût des réglages techniques de base (mise au point), incluant les
réglages des commandes utilisateurs. Ces coûts sont placés sous
la responsabilité du revendeur auprès duquel le produit a été acheté.
6. Paiement des frais de transport.
BESCHRÄNKTE GARANTIEAußer in den unten beschriebenen Fällen deckt die vom Händler unter
Umständen gewährte Garantie alle Material- oder Herstellungsfehler
dieses Produktes ab. In den folgenden Fällen wird keine Garantie
gewährt:
1. Wenn die Seriennummer des Produktes unleserlich gemacht,
geändert oder entfernt worden ist.
2. Bei einer Beschädigung, Beeinträchtigung oder Funktionsstörung,
die aus folgenden Fällen resultiert:
a. Unfall, falscher Gebrauch, Missbrauch, Fahrlässigkeit, Feuer,
Wasser, Staub, Rauch, Blitzeinschlag oder andere
Naturereignisse, nicht autorisierte Veränderungen des Produktes
oder die Missachtung der dem Produkt beigefügten Anleitung.
b. Reparatur oder der Versuch einer Reparatur durch nicht
autorisierte Personen.
c. Jeglicher Transport des Produktes (die Haftung liegt in diesem
Fall bei der den Transport durchführenden Person).
d. Entfernung oder Installation des Produktes.
e. Jegliche andere Ursachen, die nicht mit einem Defekt dieses
Produktes zusammenhängen.
3. Verwendung von Kartons, Transportkisten, Batterien,
Außengehäusen, CD-ROMs oder anderem Zubehör zusammen mit
diesem Produkt.
4. Entfernungs- oder Installationsforderungen und –kosten.
5. Kosten der technischen Anfangseinstellungen (Setup), einschließlich
der Einstellungen der Benutzersteuerungen. Diese Kosten sind vom
Händler zu tragen, von dem das Produkt erworben wurde.
6. Bezahlung von Transportkosten.
GARANZIA LIMITATAA parte la specificazione seguente, la graanzia che potrebbe essere
fornita dal rivenditore copre tutti i difetti di materiali o nella lavorazione
in questo prodotto. I seguenti non sono coperti dalla garanzia :
1. Ogni prodotto che ha il numero seriale difettoso, modificato o
rimosso.
2. Danni, deterioramento o malfunzionamento risultanti da;
a. Incidenti, abuso, cattivo uso, negligenza, fuoco, acqua, polvere,
fumo,fulmini o altri atti naturali di tipo naturale, modifiche
inautorizzate del prodotto, o errori nel seguire le istruzioni fornite
con il prodotto.
b. Riparazioni o tentativi di riparazioni effettuati da persono non
autorizzate.
c. Qualsiasi trasporto del prodotto (i reclami devono essere
presentati dal corriere).
d. Rimozione o installazione del prodotto.
e. ogni altra causa non relativa ad un deficit del prodotto.
3. Cartoni, scatole di trasporto, batterie, armadietti esterni, CDROM,
o qualsiasi altro accessorio annesso al prodotto.
4. Carichi di rimozione o installazione.
5. Costi di aggiustamenti tecnici iniziali  (set-up), includendo i comandi
di regolazione. Il rivenditore dal quale avete acquistato il prodotto è
responsabile di ciò.
6. Pagamento delle spese di consegna.
GARANTÍA LIMITADAA excepción de lo que se especifica abajo, la garantía que puede ser
suministrada por el distribuidor cubre todos los defectos en material o
elaboración en este producto. Lo siguiente no es cubierto por la garantía:
1. Cualquier producto en el cual el número serial haya sido desfigurado,
modificado o removido.
2. Daños, deterioro o malfuncionamiento resultado de;
a. Accidente, mal manejo, abuso, negligencia, fuego, agua, polvo,
humo, relámpagos u otros fenómenos naturales, modificaciones
del producto sin autorización, fallas en el seguimiento de las
instrucciones suministradas con el producto.
b. Reparación o intentos de reparación por personas no
autorizadas.
c. Cualquier envío del producto (el reclamo debe presentarse al
transportador).
d. Remoción o instalación del producto.
e. Cualquier otra causa que no este relacionada con un defecto
del producto.
3. Cartones, estuches de transporte, pilas, gabinetes externos,
CDROM, o cualquier accesorio utilizado en conexión con el
producto.
4. Costos por instalación o remoción.
5. Costo de los ajustes técnicos iniciales (configuración), incluyendo
el ajuste de los controles de usuario. Estos costos son
responsabilidad del distribuidor donde se adquirió el producto.
6. Pago de los costos de envío.
BEGRÄNSAD GARANTIGarantin som ges av återförsäljaren täcker alla brister i material och
utförande med undantag av vad som anges nedan. Följande täcks inte
av garantin:
1. Produkter vars serienummer har blivit oläsligt, modifierats eller tagits
bort.
2. Skador, försämring eller felfunktion som beror på:
a. Olyckor, fel bruk, missbruk, vanskötsel, brand, vatten, stoft, rök,
åska eller annan orsak som beror på naturen, icke auktoriserad
modifikation av produkten samt underlåtenhet att följa
anvisningarna som lämnas med produkten.
b. Reparationer eller försök på reparation av icke auktoriserade
personer.
c. Transportskador (dessa bör riktas till transportföretaget).
d. Avmontering eller installation av produkten.
e. Övriga orsaker som inte har något samband med produktens
fel.
3. Förpackningslådor, bärväskor, batterier, externa höljen, CD-ROM-
skivor samt andra tillbehör som används tillsammans med
produkten.
4. Avmonterings- och installationskostnader.
5. Kostnader för tekniska justeringar (inställning), inklusive justering
av användarreglagen. Dessa kostnader är återförsäljarens ansvar
där produkten köpts.
6. Betalning för transportkostnader. 
						

							Product Registration Card
PLACE 
CORRECT 
POSTAGE 
HERE
ATTN: CUSTOMER SERVICE & SUPPORT
NEC TECHNOLOGIES, INC.
VISUAL SYSTEMS DIVISION
1250 N. ARLINGTON HEIGHTS RD.
ITASCA, IL    60143-1248
NEC Technologies
Projectors
USA and Canada Only
Regcard.p6501.9.17, 4:41 PM 1 
						

							Register your projector!!
In order to qualify for the One Business Day 
replacement coverage portion of InstaCare : 
Visit our website at www.nectech.com, click on 
product registration, then on presentation products and 
submit your completed form online, or return this 
completed registration card.
Upon receipt, we’ll send a confirmation letter 
with all the details youll need to take advantage 
of fast, reliable warranty and service programs from the 
company that provides:
Solutions with Vision, NEC Technologies. 
NEC Technologies, the NEC Technologies Spirit icon and InstaCare are registered trademarks, and InstaCare Xpress and 
TravelCare are service marks of NEC Technologies Inc.  NEC is a registered trademark of NEC Corporation.  SMARTer 
Kids is a trademark of the SMARTer Kids Foundation.  DLP is a trademark of Texas Instruments Inc.  GT Series projectors 
are covered by InstaCare three-day repair/return service only.  InstaCare and InstaCare Xpress service is available only 
in the U.S. and Canada. *Airline restrictions and flight availability may apply for InstaCare Xpress service.
REGISTRATION CARD FOR NEC TECHNOLOGIES PROJECTORS
THANK YOU
Thank you for your purchase of an NEC Technologies 
projector.  By purchasing an NEC projector, you are 
able to access the best limited warranty and service 
programs available in the industry today.
InstaCare® service provides for the repair and return of 
your projector within three business days.  For the ultimate 
in hassle free service, NEC pays for the round-trip 
shipping.
When time matters most and overnight replacement is 
not fast enough, 
InstaCare Xpress,S SM available for a 
nominal fee, provides for a “next available flight ” 
replacement option*.
TravelCareSM allows projector customers to receive 
service on their projector when traveling internationally, 
regardless of where the projector was originally 
purchased.
With a full compliment of warranty and service 
programs from NEC, you’ll never be stranded at 
work or on the road!
Zip+4/Postal Code
What types of products do you currently use and what products are you interested in within the next 12 months?
CorporateGovernment
StateFederal
EducationOther
K-12Higher Ed Fill in BlankLocal
Which segment most closely identifies the market that you will use the product in
1000
Please indicate the # of employees at your company YesNoE-MailMailCan we contact you about new 
product offerings in the future?
via
Currently Use Interested
LCD Projectors
DLP
TM Projectors
High Light Output Projectors
CRT Projectors
Home TheatrePlasma Monitors
CRT Monitors
Handheld Computers
Notebook Computers
Desktop Computers
Single/Multi CPU Servers
Currently Use Interested
       Check this 
box if you do not 
want to receive 
special offers 
from carefully 
selected vendors.
Mr.Ms.Mrs.
Title
Company Name
Street AddressApt. #
CitySt./Prv.
First NameLast NameInitial
E-MailDay Phone-AREA CODEPlease indicate which product was purchased
Date of PurchaseModel #
Serial #MONTH DAY YEAR
If your market segment is Education, did you purchase through the SMARTer KidsTM Foundation? YesNo
Regcard.p6501.9.17, 4:41 PM 2 
						

							NEC SOLUTIONS’ PROJECTOR PRODUCTSNEC Solutions (America), Inc. (hereafter NEC Solutions) warrants
this product to be free from defects in material and workmanship
under the following terms.
HOW LONG IS THE WARRANTYNEC Solutions’ VT45 projectors are covered by a two (2)
year limited parts and labor warranty from the date of the first
customer purchase. The lamp when used under normal oper-
ating conditions is warranted for 1000 hours or six months,
whichever comes first.
WHO IS PROTECTEDThis warranty may be enforced only by the first purchaser, and is
not transferable.
WHAT IS COVERED AND WHAT IS NOT COVEREDExcept as specified below, this warranty covers all defects in
material or workmanship in this product.
NEC SOLUTIONS’ LIABILITY FOR ANY DEFECTIVE PRODUCT IS
LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT
AT NEC SOLUTIONS’ OPTION. REPLACEMENT PRODUCTS MAY
BE NEW OR ‘LIKE NEW’. The following are not covered by the
limited warranty and NEC Solutions shall not be liable for:
1. Any product which is not distributed in the U.S.A. or Canada
by NEC Solutions or which is not purchased, installed, and
operated in the U.S.A or Canada.
2. Any product on which the serial number has been defaced,
modified or removed.
3. Normal decrease in lamp light output over time.
4. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, abuse, neglect, improper ventilation, fire,
dust, smoke, water, lightning or other acts of nature, unau-
thorized product modification, or failure to follow instruc-
tions supplied with the product.
b. Repair or attempted repair by anyone other than a NEC
Solutions authorized service center.
c. Any shipment of the product (claims must be presented to
the carrier).
d. Removal or installation of the product.
e. Any other cause which does not relate to a product defect.
f. Use of the product beyond normal operating conditions.
Normal operating conditions are defined as product use
not in excess of 
5 hours per day and 260 days per year.
5. Cartons, carrying cases, shipping cases, batteries, external
cabinets, magnetic tapes, or any accessories used in connec-
tion with the product.
6. Service required as a result of third party components.
WHAT NEC SOLUTIONS WILL PAY FORNEC Solutions will pay labor and material expenses for covered
items, but NEC Solutions will not pay for the following:
1. Removal or installation charges.
2. Costs of technical adjustments, set-up, maintenance, or adjust-
ment of user controls.
3. Payment of shipping and related charges incurred in returning
the product for warranty repair.
LIMITED WARRANTY (USA and Canada only)
HOW YOU CAN GET WARRANTY SERVICE1. To obtain ser vice on your product, consult the dealer from whom
you purchased the product.
2.
Whenever warranty service is required, the original dated invoice
(or a copy) must be presented as proof of warranty coverage. In
order to obtain warranty service, you may be required to describe
and demonstrate the problem to your dealer or to NEC Solutions.
3. All products returned to NEC Solutions for service MUST have
prior approval. To receive approval or for the name of the
nearest NEC Solutions authorized service center, call NEC
Solutions at 800-836-0655.
4. It shall be your obligation and expense to ship the product,
freight prepaid, or to deliver it to a NEC Solutions authorized
service center, in either the original package or a similar pack-
age affording an equal degree of protection.
5.
In the event a product is returned to NEC Solutions for warranty
service, and it is determined that there is no product defect or that
the product condition is not covered by this limited warranty, a
diagnostic service fee may be charged to the customer.
LIMITATION OF IMPLIED WARRANTIESEXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY,
NEC SOLUTIONS MAKES NO OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. ANY IMPLIED WARRAN-
TIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS
AND DURATION OF THIS LIMITED WARRANTY.
EXCLUSION OF DAMAGESNEC SOLUTIONS’ LIABILITY FOR ANY DEFECTIVE PRODUCT IS
LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT
AT NEC SOLUTIONS’ OPTION. NEC SOLUTIONS SHALL NOT
BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS
IN THIS PRODUCT, DAMAGES BASED UPON INCONVE-
NIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME,
COMMERCIAL LOSS; OR
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSE-
QUENTIAL OR OTHERWISE.
HOW STATE LAW RELATES TO THE WARRANTYSOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLU-
SIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
FOR MORE INFORMATION, CONTACT:
NEC SOLUTIONS (AMERICA), INC.
1250 N. Arlington Heights Road, Suite 500
Itasca, Illinois 60143-1248
TELEPHONE 800-836-0655
www.necvisualsystems.com
Customers are cautioned that product performance is affected by
system configuration, software, the application, customer data,
and operator control, among other factors. While NEC Solutions’
products are considered to be compatible with many systems, the
specific functional implementation by the customers of the prod-
uct may vary. Therefore, the suitability of a product for a specific
purpose or application must be determined by the customer and
is not warranted by NEC Solutions.
Printed in Japan
 
						

							DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
U.S. Responsible Party:
Address:
Tel. No.:NEC Technologies, Inc.
1250 N. Arlington Heights Road
Itasca, Illinois 60143
(630) 467-5000
Type of Product:
Equipment Classification:
Models:LCD Projector
Class B Peripheral
VT45
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.  
						

							Information to User for VT45K Projector
Compared with the conventional VT45, the lamp life for the VT45K has been extended as shown in the table below.
The operation and lamp replacement procedures for VT45K are the same as the conventional VT45.
Projector Model Number
Lamp Model Number
Lamp Life Normal
Eco 1
Eco 2VT45K
VT45LPK
2200 hours
up to 2700 hours
up to 3500 hoursVT45
VT45LP
1000 hours
up to 1500 hours
up to 2000 hours
• The projector will not turn on if you continue to use the lamp 100 hours after the lamp life has reached the end of its usable life in
each Lamp mode.
• The lamp is warranted for 2200 hours of operation time within 6 months.
Informationen für die Benutzer des Projektors VT45K
Im Vergleich zum herkömmlichen VT45 wurde die Lebensdauer der Lampe für den VT45K - wie in nachfolgender Tabelle dargestellt - verlängert.
Die Bedienung und das Lampenaustausch-Verfahren des VT45Ks sind identisch mit dem des herkömmlichen VT45s.
Projector-Modellnummer
Lampen-Modellnummer
Lampen-LebensdauerNormal
Eco 1
Eco 2VT45K
VT45LPK
2200 Stunden
Bis zu 2700 Stunden
bis zu 3500 StundenVT45
VT45LP
1000 Stunden
bis zu 1500 Stunden
up to 2000 hours
• Der Projektor schaltet sich nicht ein, wenn Sie die Lampe weiterbenutzen, nachdem die Nutzungszeit bereits 100 Stunden
überschritten ist. Dies gilt für alle Lampenmodi.
• Für die Lampe besteht eine Garantie für die ersten 2200 Betriebsstunden innerhalb der ersten 6 Monate.
Information pour l’utilisateur du projecteur VT45K
Comparé au VT45 conventionnel, la durée de vie de la lampe du VT45K a été augmentée comme indiqué sur le tableau suivant.
Les procédures d’utilisation et de remplacement de la lampe du VT45K sont identiques à celles du VT45 conventionnel.
Référence du modèle de projecteur
Référence de la lampe
Durée de vie de la lampeNormal
Eco 1
Eco 2VT45K
VT45LPK
2200 heures
jusqu’ à 2700 heures
jusqu’ à 3500 heuresVT45
VT45LP
1000 heures
jusqu à 1500 heures
jusqu à 2000 heures
• Le projecteur ne s’allume pas si l’on continue à utiliser la lampe 100 heures après la fin de la durée de vie de la lampe danschaque
mode Lampe.
• La lampe est garantie pour 2200 heures de fonctionnement pendant 6 mois.
Informazioni sul proiettore VT45K per i clienti
Rispetto al proiettore VT45 convenzionale, la durata della lampada del VT45K è stata aumentata come nella tabella qui sotto.
Le procedure operative e di sostituzione della lampada del VT45K sono uguali a quelle del  VT45 convenzionale.
Numero del modello del proiettore
Numero del modello della lampada
Durata della lampada Normale
Eco 1
Eco 2VT45K
VT45LPK
2200 ore
fino a 2700 ore
fino a 3500 oreVT45
VT45LP
1000 ore
fino a 1500 ore
fino a 2000 ore
• Il proiettore non si accende se continuate ad usare la lampada 100 ore dopo il raggiungimento della fine della durata della
lampada in ciascun modo della lampada.
• La lampada è coperta da una garanzia per 2200 ore dutilizzo entro 6 mesi.
Printed in China
7N8P1851 
						

							Información para el uso del proyector VT45K
En comparación con el VT45 convencional, la vida útil de la lámpara del VT45K se ha ampliado como se muestra en la tabla siguiente.
Los procedimientos de operación y reemplazo de la lámpara para el VT45K son los mismos que para el convencional VT45.
Número de modelo del proyector
Número de modelo de la lámpara
Vida útil de la lámparaNormal
Eco 1
Eco 2VT45K
VT45LPK
2200 horas
un máximo de 2700 horas
un máximo de 3500 horasVT45
VT45LP
1000 horas
un máximo de 1500 horas
un máximo de 2000 horas
• Si continua utilizando el proyector 100 horas después de que se ha llegado al final de la vida útil de la lámpara en cada modode
lámpara, el proyector no se encenderá.
• El funcionamiento de la lámpara se garantiza por un periodo de 2200 horas en 6 meses.
Information till användaren om VT45K-projektorn
Jämfört med den konventionella VT45 har lampans livstid hos VT45K förlängts enligt tabellen nedan.
Lampan hos VT45K bytas ut på samma sätt som hos den konventionella VT45.
Projektorns modellnummer
Lampans modellnummer
Lampans livslängd Normal
Eko 1
Eko 2VT45K
VT45LPK
2200 timmar
upp till 2700 timmar
upp till 3500 timmarVT45
VT45LP
1000 timmar
upp till 1500 timmar
upp till 2000 timmar
• Projektorn kommer inte att sättas på om du fortsätter att använda lampan 100 timmar efter att lampans livslängd uppnåtts i varje
lampläge.
• Lampan har garanti för 2200 timmars användning inom 6 månader.
S
						

							E–1
VT45
LCD Projector
User’s Manual
English 
						

							E–2
IMPORTANT INFORMATION
Precautions
Please read this manual carefully before using your
NEC VT45 Projector and keep the manual handy for
future reference.
Your serial number is located under the name plate
label on the right side of your VT45. Record it here:
CAUTION
To turn off main power, be sure to remove
the plug from power outlet.
The power outlet socket should be in-
stalled as near to the equipment as pos-
sible, and should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN
THE CABINET.
NO USER-SERVICEABLE PARTS IN-
SIDE. REFER SERVICING TO QUALI-
FIED NEC SERVICE PERSONNEL.
This symbol warns the user that
uninsulated voltage within the unit may
be sufficient to cause electrical shock.
Therefore, it is dangerous to make any
kind of contact with any part inside of the
unit.
This symbol alerts the user that impor-
tant information concerning the operation
and maintenance of this unit has been
provided. The information should be read
carefully to avoid problems.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S GROUNDED PLUG WITH
AN EXTENSION CORD OR IN AN OUTLET UNLESS
ALL THREE PRONGS CAN BE FULLY INSERTED.
DO NOT OPEN THE CABINET. THERE ARE HIGH-
VOLTAGE COMPONENTS INSIDE. ALL SERVICING
MUST BE DONE BY QUALIFIED NEC SERVICE PER-
SONNEL.
DOC Compliance Notice
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment
Regulations.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB (A) ac-
cording to ISO 3744 or ISO 7779.
RF Interference
WARNING
The Federal Communications Commission does
not allow any modifications or changes to the unit
EXCEPT those specified by NEC Technologies in
this manual. Failure to comply with this govern-
ment regulation could void your right to operate
this equipment.
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential instal-
lation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
•Consult the dealer or an experienced radio / TV
technician for help.
In UK, a BS approved power cable with moulded plug
has a Black (five Amps) fuse installed for use with
this equipment. If a power cable is not supplied with
this equipment please contact your supplier.
• IBM is a registered trademark of International Business Ma-
chines Corporation.
• Macintosh and PowerBook are registered trademarks of Apple
Computer, Inc.
• Other product and company names mentioned in this users
manual may be the trademarks of their respective holders.