NEC Projector VE303 User Manual

							44
SCREENIMAGESETTINGSOPTIONSGENERAL3D SETTINGS
ASPECT RATIOOVERSCANV KEYSTONE
AUTO
COMPUTERSELECTEXITMOVEMOVE
 ASPECT RATIO
Use this function to choose your desired aspect ratio.
  4:3: This format is for 4×3 input sources.
  16:9: This format is for 16×9 input sources, like HDTV and DVD 
enhanced for Wide screen TV. 
  16:10: This format is for 16×10 input sources, like widescreen 
laptops.
  15:9: This format is for 15×9 input sources.
  5:4: This format is for 5×4 input sources.
  NATIVE: This format displays the original image without any 
scaling.
  AUTO: Automatically selects the appropriate display format.
ASPECT RATIO
NATIVE
AUTO
SCREEN | 
GENERAL 
English ... 
User Controls  
						

							45
 OVERSCAN
Overscan function removes the noise in a video image. Overscan 
the image to remove video encoding noise on the edge of video 
source. 
OVERSCAN
 V KEYSTONE
Press the  or  button to adjust image distortion vertically. If 
the image looks trapezoidal, this option can help make the image 
rectangular.
V KEYSTONEEXIT
EXITADJUST
	Each I/O has different setting of “OVERSCAN”.
	Please see more information on Quick Keys on page 13. 
... English 
User Controls  
						

							46
SCREENIMAGESETTINGSOPTIONSGENERAL3D SETTINGS
3D3D INVERT3D STRUCTURE
OFF
COMPUTERSELECTEXITMOVEMOVE
OFFFRAME PACKING
  3D
Choose “ON” to turn this item on for 3D images. (default: OFF)
3DOFF
ON
 3D INVERT
 Choose “ON” to invert left and right frame contents.
 Choose “OFF” for default frame contents. 
3D INVERTOFF
ON
	“3D INVERT” and 
“3D STRUCTURE”only available when 3D is enabled.
	Compatible 3D source, 3D content and active shutter glasses are required for 3D viewing.
SCREEN |  
3D SETTINGS 
English ... 
User Controls  
						

							47
TIP: 3D supported signal
•  For PC Signal :800x600@60/120Hz1024x768@60/120Hz1280x720@60Hz•  For Video Signal :480i@60Hz•  For HDMI Signal :720p (Frame Packing) 1280 x 720@50/60/59.941080p (Frame Packing) 1920 x [email protected]/24720p (Top and Bottom) 1280 x 720@50/60/59.94* (*Select manually)1080p (Top and Bottom) 1920 x [email protected]/241080i (Side by Side (Half)) 1920 x 1080@50/60/59.94* (*Select manually)
 3D STRUCTURE
Adjust the 3D format to display 3D content correctly.
 
3D STRUCTURE
AUTO
FRAME PACKING
TOP-AND-BOTTOM
SIDE-BY-SIDE
FRAME SEQUENTIAL 
... English 
User Controls  
						

							48
SCREENIMAGESETTINGSOPTIONSGENERALSIGNAL
LANGUAGEORIENTATIONHDMI SETTINGS
ENGLISH
COMPUTERSELECTEXITMOVEMOVE
ADVANCED
MUTEVOLUME
DESKTOP REAR
OFF
 LANGUAGE
Choose the multilingual OSD menu. Press the  or  button into 
the sub menu and then use the  or  button to select your 
preferred language. Press ENTER to finalize the selection. 
SELECTEXITMOVE MOVE
PLEASE SELECT A MENU LANGUAGE. LANGUAGE
 ORIENTATION
 DESKTOP FRONT:
When selected, the image is projected straight on the screen.
 DESKTOP REAR:
When selected, the image will appear reversed.
 CEILING FRONT:
When selected, the image will turn upside down.
	DESKTOP REAR and CEILING REAR are to be used with a translucent screen.
SETTINGS | 
GENERAL 
English ... 
User Controls  
						

							49
 CEILING REAR
This is the default selection. The image will appear reversed in 
upside down position.
ORIENTATIONDESKTOP FRONT
CEILING FRONT DESKTOP REAR
CEILING REAR
 HDMI SETTINGS
Use this feature to set HDMI.
HDMI SETTINGS
AUTO
COMPUTER SELECT
EXITMOVE
AUDIO SELECT VIDEO LEVEL
HDMI
HDMI
 VIDEO LEVEL:  Select “AUTO” to automatically detect 
video level. If automatic detection may not work well, select 
“NORMAL” to disable the “ENHANCED” feature of your 
HDMI equipment or select “ENHANCED” to improve image 
contrast and increase detail in the dark areas. 
VIDEO LEVEL
AUTO
NORMAL
ENHANCED
 AUDIO SELECT: Use this function to select the audio source 
from “HDMI” or “COMPUTER”. 
AUDIO SELECT
HDMI
COMPUTER
	“HDMI SETTINGS” is only supported under HDMI source. 
... English 
User Controls  
						

							50
 MUTE
 Choose “ON” to turn mute on. 
 Choose “OFF” to turn mute off. 
MUTEOFF
ON
 VOLUME
  Press the  button to decrease the volume.
  Press the  button to increase the volume.
VOLUME
ADJUST
EXIT EXIT 
English ... 
User Controls  
						

							51
SCREENIMAGESETTINGSOPTIONSGENERALSIGNAL
PHASECLOCKH. POSITION
COMPUTERSELECTEXITMOVEMOVE
ADVANCED
V. POSITION
 PHASE
Synchronize the signal timing of the display with the graphic card. 
If the image appears to be unstable or flickers, use this function to 
correct it.
PHASE
ADJUST
EXIT EXIT
 CLOCK
Change the display data frequency to match the frequency of 
your computer’s graphic card. Use this function only if the image 
appears to flicker vertically.
CLOCK
ADJUST
EXIT EXIT
 H. POSITION
 Press the  button to move the image left.
 Press the  button to move the image right. 
H. POSITION
ADJUST
EXIT EXIT
	“SIGNAL” is only supported in Analog VGA (RGB) signal.
SETTINGS | 
SIGNAL 
... English 
User Controls  
						

							52
 V. POSITION
 Press the  button to move the image down.
 Press the  button to move the image up. 
V. POSITION
ADJUST
EXIT EXIT 
English ... 
User Controls  
						

							53
SCREENIMAGESETTINGSOPTIONSGENERALSIGNAL
LOGOCLOSED CAPTIONSECURITY
OFF
COMPUTERSELECTEXITMOVEMOVE
ADVANCED
TEST PATTERN
OFFOFF
 LOGO
Use this function to display the startup screen (NEC logo).
 ON: Displays the NEC logo.
 OFF: Not display the NEC logo.
LOGO
OFFON
 CLOSED CAPTION
Use this function to enable closed caption and activate the closed 
caption menu. Select an appropriate closed captions option: OFF, 
CC1, CC2, CC3, CC4, T1, T2, T3, or T4.
CLOSED CAPTION
OFF
SETTINGS | 
ADVANCED
	The closed caption is not available under the following conditions:
- when messages or menus are displayed.
- when an image is frozen.
- when [V KEYSTONE] setting is not zero or [ASPECT RATIO] setting is not [AUTO] or [4:3].
	The projector does not support optional extended characters for closed captioning. 
... English 
User Controls