NEC Projector V300x User Manual

82
7. Appendix
 Compatible Input Signal List
Horizontal:	15KHz	to	100KHz	(RGB: 	24KHz	or	over)
Vertical: 	50Hz	to	120Hz	(Signals	with	higher	than	refresh	rate	85	Hz	support	resolutions	of	1024	x	768	or	lower.)
Signal Resolution
(Dots) Frequency H.
(kHz) Refresh Rate
(Hz)
VIDEO NTSC/PAL60
—15.7360.00
PAL/SECAM —15.6350.00
IBM compatible 640 × 480
31.4759.94
640 × 480 31.4859.95
640 × 480 37.8672.81
640 × 480 37.5075.00
640 × 480 43.2785.01
800 × 600 35.1656.25
800 × 600 37.8860.32
800 × 600 48.0872.19...

83
7. Appendix
NOTE: Contact your local dealer for a full list of the PC Control Codes \
if needed.
Cable Connection
Communication ProtocolBaud rate ......................................... 38400 bps
Data length ...................................... 8 bits
Parity ............................................... No parity
Stop bit ............................................ One bit
X on/off ............................................ None
Communications procedure  .............Full duplex
NOTE:...

84
7. Appendix
No  image  is  displayed  from  your  PC  or  video  equipment  to  the 
projector.Still no image even though you connect the projector to the PC 
first, then start the PC.
Enabling your notebook PC’s signal output to the projector.
•	 A	combination 	of 	function 	keys	 will	enable/disable 	the 	exter -
nal	 display.	 Usually,	 the	combination	 of	the	 “Fn”	 key	along	
with	 one	of	the	 12	function	 keys	turns	 the	external	 display	
on or off. 
No image (blue or black background, no...

85
7. Appendix
In the space below please describe your problem in detail.
Information on application and environment where your projector is usedProjectorModel number:
Serial No.:
Date of purchase:
Lamp operating time (hours):
Eco Mode:   Off  On
Information on input signal: Horizontal synch frequency  [          ] kHz
Vertical synch frequency  [          ] Hz
Synch polarity  H  (+)   (−)
  V  (+)   (−)
Synch type   Separate   Composite
   Sync on Green
STATUS Indicator: Steady light   Orange...

86
7. Appendix
 TravelCare Guide
TravelCare - a service for international travelers
This  product  is  eligible  for  “TravelCare”,  NEC’s  unique  international 
warranty.
Please note that TravelCare coverage differs in part from coverage under 
the warranty included with the product.
Services offered with TravelCare
This warranty allows customers to receive service on their product at the 
NEC and NEC-designated service stations in the countries listed herein 
when temporarily traveling...

87
7. Appendix
NEC Corporation of Malaysia Sdn. Bhd.Address:	 33rd	Floor,	Menara	 TA	One,	22,	Jalan	P.	Ram-
lee,	50250	Kuala	Lumpur,	Malaysia
Telephone:	 +6	03	2178	3600	(ISDN)
Fax	Line:	 +6	03	2178	3789
Email Address:  [email protected]
WEB Address:  http://www.necmalaysia.com.my/home.html
(Regions Covered)
Malaysia
Hyosung ITX Co., Ltd. Address:	 1st	Fl.,	Ire	B/D. 	#2,	4Ga,	Yangpyeng-Dong,	
Youngdeungpo-Gu,	Seoul,	Korea	150-967
Telephone:	 +82	2	2163	4193
Fax	Line:	 +82	2	2163	4196
Email Address:...

88
7. Appendix
TO:	NEC	or	NEC’s	Authorized	Service	Station: 		
FM: 
  (Company & Name with signature) 
Dear Sir (s), 
I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your 
following conditions, and also the Service fee will be charged to my credit card account, if I don’t return the Loan units within the 
specified period. I also confirm following information is correct.     Regards.
 
application sheet for  travelCare service...

89
7. Appendix
5.	Loan	Service	Charges	and	Conditions:
Upon  acceptance  of  this  NEC  Projector,  Customer  agrees  to  assume 
liability for this loan unit.
The	 current	 cost	of	use	 of	this	 loan	 unit	is	US$200	 for	12	calendar 	
days.
If	 Customer	 does	not	return	 the	unit	 within	 the	12	calendar	 days,	Cus-
tomer will be charged the next highest cost up to and including the full 
list 	price 	to 	Credit 	Cards, 	which 	price 	will 	be 	informed 	by 	NEC 	Authorized	
Service  Stations.  Please...

©	NEC	Display	Solutions,	Ltd.	2009	-	2010 7N951472 

6 - 5   SETUP SEND
Automatic transmission
This is the easiest way to send a fax.
1If it is not illuminated in green, press   (Fax). Place the 
original face up in the ADF, or face down on the scanner glass.
2Enter the fax number using the dial pad, One-Touch, 
Speed-Dial or Search.
(See  One-Touch Dialing  on page 7-5 and Speed-Dialing on 
page 7-6.)
3Press Start.
4If you are using the scanner glass, press 2 or Start.
Sending a fax at the end of a conversation
At the end of a conversation you can send a...