NEC Projector UM352W User Manual

							89
VIEWER
Select	the	saved	images/videos	and	project	them	by	the	projector.	This	function	is	av ailable	sav ed	data	in	three	stor-
ages	explained	below:
(1)	Projector	Memory:	Images	temporarily	sav ed	in	the	projector	built-in	memory .	(Call	“Captured	image”	in	this	manual)
(2)	USB	Memory:	Images	and	videos	saved	in	the	USB	memor y	connected	with	the	projector .
(3)	Common	Folder:	Images	and	videos	saved	in	the	common	f older	in	a	netw ork	connected	with	the	projector .
WHITEBOARD
Enables	to	perform	dra wing	by	the	stylus	pen	supplied	with	the	projector.	Before	starting	the	[WHITEBOARD],	perfor m	
the	calibration	in	the	[TOOLS]	→	[PEN	SETTINGS].
COLLABORATION
Enables	to	share	the	drawing	drawn	by	the	stylus	pen	with	the	computer	connected	in	a	network.
REMOTE DESKTOP CONNECTION
•	 Select	the	computer	connected	in	the	same	network	with	the	projector,	and	the	projector	projects	the	images	on	
the	computer	over	the	network.
	 A	commercially	available	USB	ke yboard	can	be	used	for	controlling	Windows	8	and	Windows	7	computers	connected	
in	the	network	with	the	projector.
IMAGE EXPRESS UTILITY LITE
•	 If	various	terminal	units	such	as	a	computer,	a	smartphone ,	and	a	tablet	are	connected	with	the	projector	in	the	
network,	it	enables	to	transfer	images	saved	on	each	terminal	to	the	projector	and	to	project	them.
•	 You	can	connect	terminal	units	in	multiple	OS	(Windows,	Mac	OS,	Android,	and	iOS)	with	the	projector	simultane-
ously.
•	 The	projector	receives	images	transf erred	from	multiple	terminal	units	(Max.	50	units)	and	projects	them	on	the	
screen	dividing	it	(Max.	4	×	4)	at	the	same	time .
BAC
DE
AB
CD
Transmit Stop Simultaneous connectionSimultaneous display
•	 Install	the	application	software	“Image	Express	Utility	Lite”,	included	in	the	CD-ROM	supplied	with	the	projector	on	
computers.	(→	page	94,	97)
•	 For	a	smartphone	and	a	tablet,	download	the	application	“Wireless	Image	Utility”	from	our	web	site	and	install	it	on	
these.	(→	page	111)
Miracast
By	wirelessly	connecting	the	terminal	units	supporting	the	Miracast	such	as	the	Android	with	the	projector,	it	enables	
the	projector	to	project	images	transferred	from	these	terminals.
Before	connecting	these	terminal	units,	set	[Miracast]	in	the	[NETWORK	SETTINGS]	on	the	projector.
6. APPS MENU  
						

							90
WEB SHARING
•	 Without	using	the	exclusive	software ,	it	enables	to	share	images	and	files	among	the	projector	and	computers	in	
the	same	network	by	accessing	the	HTTP	server	of	the	projector	utilizing	the	web	browser.	(WEB	SHARING)
B
AC DE
Sharing files
•	 It	enables	to	control	the	projector	on	the	web	browser	screens	on	the	computers.
•	 Connect	the	projector	and	computers	in	a	networ k	and	access	the	URL	in	below	by	the	web	browser	of	the	comput-
ers.
	 URL:	http://
NETWORK SETTINGS
Set	up	below	for	connecting	the	projector	with	a	wired/wireless	LAN.
PROJECTOR	NAME
Set	up	the	host	name	and	domain	name	of	the	projector.	Ser ial	n umber	of	the	projector	is	set	as	f actory	def ault.
NETWORK	INFORMATION
Indicate	information	when	the	projector	has	connected	in	a	network	(by	a	wired/wireless	LAN)
WIRED LAN
Set	up	for	connecting	the	projector	by	a	wired	LAN.
WIRELESS LAN
Set	up	for	connecting	the	projector	by	a	wireless	LAN.	At	the	same	time,	set	up	for	the	SIMPLE	ACCESS	POINT,	
Wi-Fi	Direct,	and	Miracast.
IMAGE	EXPRESS	UTILITY	LITE
Set	up	the	MODE	(FREE,	MANAGED)	for	the	IMAGE	EXPRESS	UTILITY	LITE.
NETWORK	SERVICE
Set	up	various	setting	for	the	AMX,	HTTP	server,	PJLink,	Alert	mail	and	CRESTRON.
TOOLS
Set	up	for	various	features	as	the	stylus	pen,	mouse,	program	timer,	day	and	time,	administrator	mode	and	default	APP.
PEN SETTINGS
For	using	the	stylus	pen	at	the	first	time	or	when	the	projector	installation	place	is	changed,	make	sure	to	perfor m	
calibration	of	the	stylus	pen	for	letting	the	projector	to	recognize	the	stylus	pen	position	properly.	(→	page	42)
MOUSE
A	commercially	available	USB	mouse	can	be	used	for	operating	the	APPS	MENU.	Perform	the	set	up	f or	using	it.
PROGRAM TIMER
Once	day	and	time	is	set	up,	changing	the	projector’s	condition	in	powering	ON/standby ,	switching	input	signals,	and	
switching	ECO	mode	can	be	automatically	performed.
DATE  AND TIME 
Determine	time	zone	and	summer	time	of	your	area	and	set	up	current	date	and	time.
6. APPS MENU  
						

							91
ADMINISTRATOR MODE
Selecting	the	menu	mode	of	the	projector,	enable/disable	to	sav e	all	set	up	values	of	the	projector,	and	set	up	a	
password	for	the	administrator	mode.
DEFAULT APP
Select	an	application	(internal	application)	performing	as	default	without	displaying	the	APPS	MENU	either	when	the	
APPS	button	on	the	remote	or	APPS	is	selected	as	the	SOURCE	on	the	onscreen	menu.
When	the	projector	is	turned	on	in	the	condition	of	being	selected	the	“APPS”	terminal,	the	application	selected	in	the	
[DEFAULT	APP]	will	be	started	automatically.
6. APPS MENU  
						

							92
7. User Supportware
❶ Software Included on CD-ROM
Names	and	Features	of	Bundled	Software	Programs
Name	of	software	programFeatures
Image	Express	Utility	Lite
Image	Express	Utility	Lite	for	
Mac	OS
•	 This	is	a	software	program	used	to	project	your	computer’s	screen	ov er	the	
USB	cable	or	the	wired/wireless	network.	The	computer	cable	(VGA)	is	not	
required.	(→	page	40,	93)
•	 This	software	program	can	be	used	to	control	the	pow er	ON/OFF	and	source	
selection	of	the	projector	from	your	computer.
•	 The	Geometric	Correction	Tool	(GCT)	function	allows	you	to	correct	distortion	
of	images	projected	on	a	curved	wall.	(→	page	98)
*	 “USB	Display”	and	“GCT”	functions	are	not	supported	b y	Mac.
Name	of	software	programFeatures
PC	Control	Utility	Pro	4
PC	Control	Utility	Pro	5	(for	Mac	
OS)
This	is	a	software	program	used	to	operate	the	projector	from	the	computer	when	
the	computer	and	the	projector	are	connected	with	LAN	(wired	or	wireless)	or	
a	serial	cable.	(→	page	101)
Name	of	software	programFeatures
Virtual	Remote	Tool
(Windows	only)
This	is	a	software	progr am	used	to	control	the	pow er	ON/OFF	and	source	selec-
tion	of	the	projector	from	your	computer	by	using	the	supplied	computer	cable	
(VGA)	and	others.	(→	page	105)
NOTE:
•	 Image	Express	Utility	Lite	does	not	support	“Meeting	Mode”	in	Image	Express	Utility	2.0	supplied	with	our	other	models.
Download	Service	and	Operating	Environment
Please	visit	our	website	about	operating	environment	and	download	service	for	each	software:
Visit	URL:	http://www.nec-display.com/dl/en/index.html
Download	-	Projector	→	Software	&	Driver
Name	and	Features	of	an	application	for	Android	/	iOS.
Name	of	application:	
Wireless	Image	Utility	(Android	/	iOS)
Features:
By	connecting	the	projector	with	a	smartphone ,	it	enables	to	transf er	photos	and	documents	sav ed	on	the	smartphone	
and	project	these	on	the	projector.	(→	page	111)
*	 Wireless	Image	Utility	is	not	contained	in	the	supplied	CD-ROM. 
						

							93
❷ Projecting Your Computer’s Screen Image from the 
Projector over a LAN (Image Express Utility Lite)
 
Using	Image	Express	Utility	Lite	contained	on	the	supplied	NEC	Projector	CD-ROM	allows	you	to	send	the	computer’s	
screen	image	to	the	projector	over	a	USB	cable	or	a	wired	or	wireless	LAN.
Image	Express	Utility	Lite	is	a	program	compatible	with	Windows.
Image	Express	Utility	Lite	for	Mac	OS	is	a	program	compatible	with	Mac	OS.	(→	page	97)
This	section	will	show	you	an	outline	about	how	to	connect	the	projector	to	a	LAN	and	to	use	Image	Express	Utility	
Lite.	For	the	operation	of	Image	Express	Utility	Lite ,	see	the	help	of	Image	Express	Utility	Lite .
Step	1:	install	Image	Express	Utility	Lite	on	the	computer.	
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	Image	Express	Utility	Lite .
TIP:
•	 Image	Express	Utility	Lite	(for	Windows)	can	be	started	from	most	commercially	available	removable	media	such	as	USB	memory	
devices	or	SD	cards	without	the	need	to	install	on	your	computer.	(→	page	96)
What You can Do with Image Express Utility Lite
Image	transmission	(for	Windows	and	Mac	OS)
•	 The	screen	of	your	computer	can	be	sent	to	the	projector	via	a	wired	or	wireless	networ k	without	a	computer	cable	
(VGA).
Audio	transfer	capability	(for	Windows	only)
•	 Image	Express	Utility	Lite	allows	you	to	send	the	computer's	screen	image	and	audio	to	the	projector	ov er	wired/
wireless	LAN	or	USB	connection.
•	 Audio	transfer	capability	is	available	only	when	the	computer	connects	with	the	projector	in	peer-to-peer	networ k.
USB	Display	(for	Windows	only)
•	 Computer’s	screen	image	can	be	projected	via	a	USB	cable,	without	connecting	a	computer	cable	(VGA).
•	 Just	connecting	the	computer	and	the	projector	ov er	a	USB	cable	will	make	the	USB	Display	function	av ailable	
(Plug	&	Play)	even	without	installing	Image	Express	Utility	Lite	on	the	computer.	(→	page	40)
Geometric	Correction	Tool	[GCT]	(for	Windows	onl y)
See	“❸	Projecting	an	Image	from	an	Angle	(Geometric	Correction	Tool	in	Image	Express	Utility	Lite)”.	(→	page	98)
7. User Supportware  
						

							94
Using on Windows
Step 1: install Image Express Utility Lite on the computer. 
NOTE:
•	 To	install	or	uninstall	the	program,	the	Windows	user	account	must	have	“Administrator”	privilege.	
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.	
•	 Image	Express	Utility	Lite	will	be	installed	to	the	system	drive	of	your	computer.
	 If	the	message	“There	is	not	enough	free	space	on	destination”	is	displayed,	free	up	enough	space	(about	100	MB)	to	install	the	
program.
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
 The menu window will be displayed.
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	Click	“start”	on	Windows.
2.	Click	“All	Programs”	→	“Accessories”	→	“Run”.
3.	 Type	your	CD-ROM	drive	name	(example:	“Q:\”)	and	“LAUNCHER.EXE”	in	“Name”.	(example:	Q:\LAUNCH-
ER.EXE)
4.	 Click	“OK”.
 The menu windo w will be displayed.
2.	 Click	“Installing	Ima ge	Express	Utility	Lite”	on	the	men u	windo w.
 The installation will start.
	 “END	USER	LICENSE	AGREEMENT”	screen	will	be	displayed.	
	 Read	“END	USER	LICENSE	AGREEMENT”	carefully	
3.	 If	you	agree,	click	“I	a gree.”	and	then	c lick	“Next”.	
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.	
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
 When the installation is complete, a completion message will be displa yed.
4.	 Click	“OK”.
 This completes the installation.
TIP:
•	Uninstalling	Image	Express	Utility	Lite
To	uninstall	Image	Express	Utility	Lite,	do	the	same	procedures	stated	as	in	“Uninstalling	Virtual	Remote	Tool”.	Read	“Virtual	Remote	
Tool”	as	“Image	Express	Utility	Lite”	(→	page	108)
7. User Supportware  
						

							95
Step 2: Connect the projector to a LAN.
Connect	the	projector	to	the	LAN	by	following	the	instructions	in	“Connecting	to	a	Wired	LAN”	(→	page	85)	and	“Con-
necting	to	a	Wireless	LAN	(Optional:	NP05LM	ser ies)”	(→	page	86).
Step 3: Start Image Express Utility Lite.
1.	 On	Windows,	click	“Start”	→	“All	programs”	→	“NEC	Projector	UserSupportware”	→ “Image Express Utility 
Lite”	→	“Image	Express	Utility	Lite”.
	 Image	Express	Utility	Lite	will	start.
	 The	select	window	for	network	connection	will	be	displayed
2.	 Select	Network	and	click	“OK”.
 The select window f or destination will show a list of connectable projectors.
•	 When	connecting	the	computer	directly	to	the	projector	by	one-to-one,	“Simple	Access	Point”	is	recommended.
•	 To	check	for	the	networ k	av ailable	for	connected	projectors,	from	the	menu,	select	[INFO.]	→	[WIRELESS	LAN]	
→	[SSID].
3.	 Place	a	check	mark	for	projectors	to	be	connected,	and	then	c lick	“Connect”.
•	 When	one	or	more	projectors	are	displayed,	from	the	menu	on	the	projector,	select	[INFO.]	→	[WIRELESS	LAN]	
→	[IP	ADDRESS].
 When connecting with the projector is established, y ou can operate the control window to control the projector. (→ 
page 41)
NOTE:
•	 When	[NORMAL]	is	selected	for	[STANDBY	MODE]	from	the	menu,	the	projector	that	is	turned	off	will	not	be	displayed	in	the	
select	window	for	destination
7. User Supportware  
						

							96
TIP:
Viewing	the	“Help”	file	of	Image	Express	Utility	Lite
•	 Displaying	the	Help	file	of	Image	Express	Utility	Lite	while	it	is	running.
	 Click	the	[?]	(help)	icon	on	the	control	window.
 The Help screen will be display ed.
•	 Displaying	the	Help	file	of	GCT	while	it	is	running.
	 Click	“Help”	→	“Help”	on	the	edit	window.
 The Help screen will be display ed.
•	 Displaying	the	help	file	using	the	Start	Menu.
	 Click	“Start”	→	“All	programs”	or	“Programs”	→	“NEC	Projector	User	Supportw are”	→	“Image	Express	Utility	Lite”	
→	“Image	Express	Utility	Lite	Help”.
 The Help screen will be display ed.
Starting Image Express Utility Lite from a USB Memory or SD Card
Image	Express	Utility	Lite	can	be	started	from	commercially	av ailable	remov able	media	such	USB	memory	or	SD	
cards	if	it	is	copied	beforehand.	This	will	eliminate	the	trouble	of	installing	Image	Express	Utility	Lite	to	your	computer.
1.	 Copy	Image	Express	Utility	Lite	to	removable	media.
	 Copy	all	the	folders	and	files	(total	size	approx.	7	MB)	from	the	“IEU_Lite	(remov able-media)”	folder	in	the	supplied	
NEC Projector CD-ROM to the root directory of your removable media.
2. Insert your removable media into your computer.
	 The	“AutoPlay”	screen	will	be	displayed	on	y our	computer .
TIP:	
•	 If	the	“AutoPlay”	screen	is	not	displayed,	open	the	folder	from	“Computer”	(“My	Computer”	for	Windows	XP).
3.	 Click	“Open	folder	to	vie w	files”
	 The	IEU_Lite.exe,	other	folder,	and	files	will	be	displayed.
4.	 Double-click	the	“IEU_Lite.e xe”	(	 ) icon.
	 Image	Express	Utility	Lite	will	start.
7. User Supportware  
						

							97
Using on Mac OS
Step 1: Install Image Express Utility Lite for Mac OS on the computer
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.
 The CD-ROM window will be displayed.
3.	 Double-click	the	“Mac	OS	X”	f older.
4.	 Double-click	“Image	Express	Utility	Lite .dmg”.
	 The	“Image	Express	Utility	Lite”	window	will	be	displa yed.
5.	 Drag	and	drop	the	“Image	Express	Utility	Lite”	f older	to	y our	Applications	f older	in	Mac	OS.
Step 2: Connect the projector to a LAN
Connect	the	projector	to	the	LAN	by	following	the	instructions	in	“Connecting	to	a	Wired	LAN”	(→	page	85)	and	“Con-
necting	to	a	Wireless	LAN	(Optional:	NP05LM	ser ies)”	(→	page	86).
Step 3: Start Image Express Utility Lite for Mac OS
1. Open your Applications folder in Mac OS.
2.	 Double-click	the	“Image	Express	Utility	Lite”	f older.
3.	 Double-click	the	“Image	Express	Utility	Lite”	icon.
	 When	Image	Express	Utility	Lite	for	Mac	OS	starts,	the	select	window	for	destination	will	be	displayed.
•	 At	the	first	time	of	startup ,	“END	USER	LICENSE	AGREEMENT”	screen	will	be	display ed	before	the	select	
window for destination is displayed.
	 Read	“END	USER	LICENSE	AGREEMENT”	and	select	“I	accept	the	terms	in	the	license	agreement”,	and	click	
“OK”.
4.	 Select	a	projector	to	be	connected,	and	then	click	“Connect”.
	 Your	desktop	screen	will	be	displayed	on	the	projector.
TIP:
Viewing	the	Help	of	Image	Express	Utility	Lite	for	Mac	OS	
•	 From	the	menu	bar,	click	“Help”	→	“Image	Express	Utility	Lite	Help”	while	Imag e	Express	Utility	is	running.	
 The Help screen will be displayed 	
 
7. User Supportware  
						

							98
❸ Projecting an Image from an Angle (Geometric Correction 
Tool in Image Express Utility Lite)
The	Geometric	Correction	Tool	(GCT)	function	allows	you	to	correct	distortion	of	images	projected	even	from	an	angle.	
What you can do with GCT
•	 The	GCT	feature	includes	the	following	three	functions
•	4-point	Correction:	You	can	fit	a	projected	image	within	the	border	of	the	screen	easily	by	align	the	four	corners	
of	an	image	to	the	ones	of	the	screen.
•	Multi-point	Correction:	You	can	correct	a	distorted	image	on	the	corner	of	a	wall	or	irregular	shaped	screen	
by	using	many	separated	screens	to	correct	the	image	as	well	as	4-point	Correction.
•	Parameters Correction:	You	can	correct	a	distorted	image	by	using	a	combination	of	transf ormational	rules	
prepared	in	advance.
This	section	will	show	an	example	for	use	with	4-point	Correction.
For	information	about	“Multi-point	Correction”	and	“Parameters	Correction”,	see	the	help	file	of	Image	Express	
Utility	Lite.	(→	page	96,	97)	
•	 Your	correction	data	can	be	stored	in	the	projector	or	your	computer	which	can	be	restored	when	necessary.
•	 The	GCT	function	is	available	with	a	USB	cable,	wired	or	wireless	LAN	connection,	and	video	cable.	
Projecting an Image from an Angle (GCT)
This	section	will	show	an	example	for	use	with	USB	Display	(using	a	USB	cable	to	connect	a	computer	and	the	projector).
•	 The	USB	Display	function	will	automatically	display	the	control	window	
•	 For	a	video	cable	or	LAN	connection,	install	and	start	Image	Express	Utility	Lite	in	your	computer	beforehand.	(→ 
page	93)
Preparation:	Adjust	the	projector	position	or	the	zoom	so	that	the	projected	image	can	co ver	the	whole	screen	area.
1.	 Click	the	“		”	(Others)	icon	and	then	the	“		”	(Options)	
button.
 Options window will be displayed.
2.	 Click	the	check	box	“Use	the	multiple	connection	feature”	and	
then clear the check mark.
3.	 Click	the	“OK”	b utton.
7. User Supportware