NEC Projector Um330x User Manual

71
4. Using the Viewer
2.	 Click	“Install	Viewer	PPT	Converter	3.0” 	on	the	menu	window.
 The installation will start.
 When the installation is complete, the Welcome window will be displayed.
3	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.	
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully	
4.	 If	you	agree,	click	“I	accept	the	terms	in	the	license	agreement” 	and	then	click	“Next”.	
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation. 	
•	 When	the...

72
4. Using the Viewer
Converting PowerPoint files and saving them to a USB memory
1.	 Insert	the	USB	memory	into	the	USB	port	of	the	computer.
2.	 On	Windows, 	click	 “Start” 	→	“All	 programs” 	→	“NEC	 Projector	 UserSupportware” 	→	“Viewer	 PPT	Converter	
3.0”	→	“Viewer	PPT	Converter	3.0”.
  Viewer PPT Converter 3.0 will start.
3.	Click	 “Brows...” 	and	select	a	PowerPoint	file	you	wish	to	convert, 	and	then	click	“Open”.
4.		Click	 “Next”.
5.	 Select	the	USB	memory	drive	for	 “Card	Drive”	and	type	in...

73
5. Using On-Screen Menu
1 Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	while	interlaced	motion	video	image	is	projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE:	The	commands	such	as	ENTER,	EXIT,	,		in	the	bottom	show	available	buttons	for	your	operation.
2.  Press the  buttons on the remote control or the projector cabinet to display the submenu.
3.  Press the ENTER button on the remote control or the projector...

74
5. Using On-Screen Menu
 Menu Elements
Slide barSolid triangleTab
Radio button
High Altitude symbol ECO mode symbol Wireless symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight 
�����������������������������Indicates the selected menu or item� 
Solid triangle  ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Tab ��������������������������������������Indicates a group of features in a dialog box�...

75
5. Using On-Screen Menu
 List of Menu Items
Some	menu	items	are	not	available	depending	on	the	input	source.
Menu	ItemDefaultOptions
SOURCE COMPUTER
*
HDMI1 *
HDMI2 *
VIDEO *
S-VIDEO *
VIEWER *
NETWORK *
USB	DISPLAY*
ADJUST PICTURE PRESET
*1–7
DETAIL	SETTINGS
GENERAL
REFERENCE *HIGH-BRIGHT,	PRESENTATION,	 VIDEO,	MOVIE,	GRAPHIC,	sRGB,	DICOM	SIM.GAMMA	CORRECTION*1DYNAMIC,	NATURAL,	BLACK	DETAIL
SCREEN	SIZE*2*LARGE,	MEDIUM,	SMALLCOLOR	TEMPERATURE*5000,	6500,	7800,	8500,	9300,	10500
DYNAMIC	CONTRAST*OFF,...

76
5. Using On-Screen Menu
Menu	ItemDefaultOptions
SETUP MENUCOLOR	SELECTCOLORCOLOR,	MONOCHROMESOURCE	DISPLAYONOFF,	ONID	DISPLAYONOFF,	ONECO	MESSAGEOFFOFF,	ONDISPLAY	
TIMEAUTO	45	SECMANUAL,	AUTO	5	SEC,	AUTO	15	SEC,	AUTO	45	SECBACKGROUND BLUEBLUE,	BLACK,	LOGO
FILTER	MESSAGE
UM330X/UM330W:	3500(H)UM280X/UM280W:	5000(H)
UM330X/UM330W: 	OFF,	100[H],	500[H],	1000[H],	2000[H],	3500[H]UM280X/UM280W:	OFF,	100[H],	500[H],	1000[H],	2000[H],	5000[H]
INSTALLATION ORIENTATIONDESKTOP	FRONTDESKTOP	FRONT,	CEILING	REAR,...

77
5. Using On-Screen Menu
Menu	ItemDefaultOptions
INFO.
WIRELESS	LAN
IP	ADDRESSSUBNET	MASKGATEWAYMAC	ADDRESSSSIDNETWORK	 TYPEWEP/WPA
CHANNEL
SIGNAL	LEVEL
VERSION FIRMWARE
D ATA
OTHERS
PROJECTOR	NAMEMODEL	NO.SERIAL	NUMBERLAN	UNIT	 TYPECONTROL	ID	(when	[CONTROL	ID]	is	set)
RESETCURRENT	SIGNALALL	DATACLEAR	LAMP	HOURSCLEAR	FILTER	HOURS
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal. 

78
5. Using On-Screen Menu
 Menu Descriptions & Functions [SOURCE]
COMPUTER
Selects	the	computer	connected	to	your	COMPUTER	input	connector	signal.
NOTE:	When	the	component	input	signal	is	connected	to	the	COMPUTER	IN	connector,	select	[COMPUTER].	
HDMI1 and 2
Selects	the	HDMI	compatible	equipment	connected	to	your	HDMI1	or	2	IN	connector.
VIDEO
Selects	what	is	connected	to	your	
VIDEO	input-VCR,	DVD	player	or	document	camera.
S-VIDEO
Selects	what	is	connected	to	your	S-VIDEO	input-VCR	or	DVD	player....

79
5. Using On-Screen Menu
 Menu Descriptions & Functions [ADJUST]
[PICTURE]
[PRESET]
This	function	allows	you	to	select	optimized	settings	for	your	projected	image.
You	can	adjust	neutral	tint	for	yellow,	cyan	or	magenta.	
There	are	seven	 factory	 presets	 optimized	 for	various	 types	of	images. 	You	 can	also	 use	[DETAIL	 SETTINGS]	 to	set	
user	adjustable	settings	to	customize	each	gamma	or	color.
Your	settings	can	be	stored	in	[PRESET	1]	to	[PRESET	7].
HIGH-BRIGHT ��������Recommended for use in a...

80
5. Using On-Screen Menu
[GENERAL]
Storing	Your	Customized	Settings	[REFERENCE]
This	function	allows	you	to	store	your	customized	settings	in	[PRESET	1]	to	[PRESET	7].
First,	select	 a	base	 preset	 mode	from	[REFERENCE],	 then	set	[GAMMA	 CORRECTION]	 and	[COLOR	 TEMPERA-
TURE].	
HIGH-BRIGHT ��������Recommended for use in a brightly lit room�
PRESENTATION  �����Recommended for making a presentation using a PowerPoint file�
VIDEO ��������������������Recommended for typical TV program viewing�
MOVIE...