NEC Projector Um280xi User Manual
Have a look at the manual NEC Projector Um280xi User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 106
96
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-
tor. (→ page 112)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN][DISABLE]Wired LAN connection will be turned off.
[ENABLE]Wired LAN connection will be turned...](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-105.png "Page 106
96
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-
tor. (→ page 112)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN][DISABLE]Wired LAN connection will be turned off.
[ENABLE]Wired LAN connection will be turned...")
![Page 107
97
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRLESS LAN]
Important
• Consult with your network administrator about these settings.
• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 113)
[PROFILE][DISABLE]Wireless LAN connection will be turned off
[EASY CONNECTION]Select [EASY CONNECTION] to execute a wireless LAN
easily using Image Express Utility Lite...](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-106.png "Page 107
97
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRLESS LAN]
Important
• Consult with your network administrator about these settings.
• When using a wireless LAN connection, attach the optional USB Wireless LAN to the projector. (→ page 113)
[PROFILE][DISABLE]Wireless LAN connection will be turned off
[EASY CONNECTION]Select [EASY CONNECTION] to execute a wireless LAN
easily using Image Express Utility Lite...")
![Page 108
98
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Access the HTTP server function to display the web browser (→ page 43) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for the USB Wireless LAN Unit.
Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To...](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-107.png "Page 108
98
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Access the HTTP server function to display the web browser (→ page 43) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for the USB Wireless LAN Unit.
Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To...")
![Page 109
99
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has six pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-108.png "Page 109
99
5. Using On-Screen Menu
Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has six pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the...")
![Page 110
100
5. Using On-Screen Menu
[SOURCE]
[SOURCE NAME] [SOURCE INDEX]
[HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY]
[SIGNAL TYPE] [VIDEO TYPE]
[SYNC TYPE] [SYNC POLARITY]
[SCAN TYPE]
[WIRED LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[WIRELESS LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[SSID] [NETWORK TYPE]
[WEP/WPA] [CHANNEL]
[SIGNAL LEVEL]](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-109.png "Page 110
100
5. Using On-Screen Menu
[SOURCE]
[SOURCE NAME] [SOURCE INDEX]
[HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY]
[SIGNAL TYPE] [VIDEO TYPE]
[SYNC TYPE] [SYNC POLARITY]
[SCAN TYPE]
[WIRED LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[WIRELESS LAN]
[IP ADDRESS] [SUBNET MASK]
[GATEWAY] [MAC ADDRESS]
[SSID] [NETWORK TYPE]
[WEP/WPA] [CHANNEL]
[SIGNAL LEVEL]")
![Page 111
101
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-110.png "Page 111
101
5. Using On-Screen Menu
[VERSION]
[FIRMWARE] Version
[DATA] Version
[OTHERS]
[PROJECTOR NAME]
[MODEL NO.]
[SERIAL NUMBER]
[LAN UNIT TYPE]
[CONTROL ID] (when [CONTROL ID] is set)")
![Page 112
102
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-111.png "Page 112
102
5. Using On-Screen Menu
Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...")
![Page 113
103
1 Setting Up the Screen and the Projector
[UM330X/UM280X]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 61.5"
(1562 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector
and the wall or screen. The largest the image can be is 116.6" (2962 mm) when the projector is 20 inches (510 mm)
between the screen side of the projector and the wall or screen....](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-112.png "Page 113
103
1 Setting Up the Screen and the Projector
[UM330X/UM280X]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 61.5\"
(1562 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector
and the wall or screen. The largest the image can be is 116.6\" (2962 mm) when the projector is 20 inches (510 mm)
between the screen side of the projector and the wall or screen....")
![Page 114
104
6. Installation and Connections
[UM330W/UM280W]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 58"
(1473 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector
and the wall or screen. The largest the image can be is 110" (2794 mm) when the projector is 20 inches (510 mm)
between the screen side of the projector and the wall or screen....](http://img.usermanuals.tech/thumb/54/92572/w64_nec-um280xi-manual_d-113.png "Page 114
104
6. Installation and Connections
[UM330W/UM280W]
The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 58\"
(1473 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector
and the wall or screen. The largest the image can be is 110\" (2794 mm) when the projector is 20 inches (510 mm)
between the screen side of the projector and the wall or screen....")
101 5. Using On-Screen Menu [VERSION] [FIRMWARE] Version [DATA] Version [OTHERS] [PROJECTOR NAME] [MODEL NO.] [SERIAL NUMBER] [LAN UNIT TYPE] [CONTROL ID] (when [CONTROL ID] is set)
102 5. Using On-Screen Menu Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN]. [ALL DATA] Reset all the adjustments and settings for all the signals to the factory preset. All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [FILTER MESSAGE], [SECURITY], [COMMUNI- CATION SPEED], [CONTROL ID], [STANDBY MODE], [FAN MODE], [LAMP LIFE REMAINING], [LAMP HOURS USED], [FILTER HOURS USED], [TOTAL CARBON SAVINGS], [WIRED LAN], and [WIRELESS LAN]. To reset the lamp usage time, see “Clearing Lamp Hour Meter [CLEAR LAMP HOURS]” below. Clearing Lamp Hour Meter [CLEAR LAMP HOURS] Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu. NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero. Do this only after replacing the lamp. Clearing the Filter Usage Hours [CLEAR FILTER HOURS] Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
103 1 Setting Up the Screen and the Projector [UM330X/UM280X] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 61.5" (1562 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector and the wall or screen. The largest the image can be is 116.6" (2962 mm) when the projector is 20 inches (510 mm) between the screen side of the projector and the wall or screen. [UM330X/UM280X] Screen SizeH1H2 L1 L2 Diagonal WidthHeight wide inch mminch mminch mminch mminch mminch mminch mm 61.5 1562 491250 37937 10243 471180 4105 18448 70 1778 561422 421067 10262 521329 7168 20511 80 2032 641626 481219 11285 591504 9241 23585 90 2286 721829 541372 12307 661679 12315 26658 100 2540 802032 601524 13330 731854 15388 29732 110 2794 882235 661676 14352 802028 18462 32805 116.6 2962 932369 701777 14367 842144 20510 34 854 NOTE: • The above figures are design values and may vary. L2 L1 H1 H2 0102030405 06070809 0 61.5 70 80 90 100 110 116.6 L2 L1 Screen height Screen size (inch) Screen size (diagonal) Screen width Center of screen Projector bottomThrow distance L1/L2 (cm) Screen side of projector Center of projection window 6. Installation and Connections
104 6. Installation and Connections [UM330W/UM280W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 58" (1473 mm) measured diagonally when the projector is 4 inches (105 mm) between the screen side of the projector and the wall or screen. The largest the image can be is 110" (2794 mm) when the projector is 20 inches (510 mm) between the screen side of the projector and the wall or screen. [UM330W/UM280W] Screen SizeH1H2 L1 L2 Diagonal WidthHeight wide inch mminch mminch mminch mminch mminch mminch mm 58 1473 491249 31781 10244 411025 4105 18448 60 1524 511292 32808 10249 421057 5120 18464 70 1778 591508 37942 11272 481214 8198 21542 80 2032 681723 421077 12296 541373 11276 24620 90 2286 761939 481212 13320 611532 14354 27698 100 2540 852154 531346 14344 671690 17432 31776 110 2794 932369 581481 14368 721849 20510 34 854 L2 L1 H1 H2 0102030405 06070809 0 58 60 70 80 90 100 110 L2L1 Screen height Screen size (inch) Screen size (diagonal) Screen width Center of screen Projector bottomThrow distance L1/L2 (cm) Screen side of projector Center of projection window
105 6. Installation and Connections WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between 41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C). • Do not expose the projector to moisture, dust, or smoke. This will harm the screen image. • Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on the side or the front of the projector. Reflecting the Image Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your NEC dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and buttons on your projector cabinet or your remote control to correct the orientation. (→ page 90)
106 6. Installation and Connections Making Connections NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. * If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver or power manage- ment software. Enabling the computer’s external display Displaying an image on the notebook PC’s screen does not necessarily mean it outputs a signal to the projector. When using a PC compatible laptop, a combination of function keys will enable/disable the external display. Usually, the combination of the “Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combinations to toggle through external display selections. Connecting Your Computer NOTE: Signals supported by Plug & Play (DDC2) INPUT COMPUTER IN HDMI 1 INHDMI 2 IN analog digitaldigital Yes YesYes A commercially available USB cable (compatible with USB 2.0 specifications) Computer cable (VGA) (supplied)To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribu- tion amplifier if connecting a signal cable longer than the cable supplied. Type B Type A Stereo mini-plug audio cable (not supplied) HDMI cable (not supplied)Use High Speed HDMI® Cable. NOTE: For Mac, use a commercially available pin adapter (not supplied) to connect to your Mac’s video port.
107 6. Installation and Connections • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER IN COMPUTER(COMPUTER 1) HDMI 1 IN HDMI1(HDMI*) HDMI 2 IN HDMI2(HDMI*) USB (PC) USB DISPLAY(USB DISPLAY) * The HDMI button on the remote control will toggle between “HDMI1 and HDMI2”. Upon the first button push the projector will always switch to HDMI 1 IN. A second button push will then switch to HDMI 2 IN. if there is only one HDMI source connected to the projector it is recommended to place that signal on the HDMI 1 IN connector. NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO ADJ. button on the remote control or the projector cabinet.
108 6. Installation and Connections Connecting an External Monitor You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: • Daisy chain connection is not possible. • When audio equipment is connected, the projector speaker is disabled. Computer cable (VGA) (supplied) Stereo mini-plug audio cable (not supplied) Computer cable (VGA) (not supplied) Stereo mini-plug audio cable (not supplied)
109 6. Installation and Connections Connecting Your DVD Player or Other AV Equipment Connecting Video/S-Video Input • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control VIDEO IN VIDEO(VIDEO) S-VIDEO IN S-VIDEO(S-VIDEO) NOTE: The AUDIO IN L and R jacks (RCA) are shared between the Video and S-Video inputs. NOTE: Refer to your VCR owner’s manual for more information about your equipment’s video output requirements. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter. Audio cable (not supplied)Video cable (not supplied) S-Video cable (not supplied) Audio cable (not supplied) Audio equipment
110 6. Installation and Connections Connecting Component Input A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SELECT] → [COMPUTER], and then place a check mark in the Component radio button. • Select the source name for its appropriate input connector after turning on the projector. Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER IN COMPUTER(COMPUTER 1) NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements. 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) Stereo mini plug - to - RCA audio cable (not supplied) Component video RCA × 3 cable (not supplied) Audio cable (not supplied) DVD player Audio Equipment