NEC Projector U321H User Manual

4English ...
Introduction
Product Features
■ High resolution   
Full HD (1920 x 1080) support. 
■ 0.5 W in standby condition with energy saving technology  
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes 
only 0.5 W (typical value).
■ Two HDMI input ports provide digital signal  
The two HDMI inputs provide HDCP compatible digital 
signals. The HDMI input
■ Quick Power Off, Direct Power Off  
The projetor can be put away immediately after the...

5... English
Introduction
Power Cord x1
Remote Control(P/N:7N901052)Projector
Package Overview
This projector comes with all the items shown below. Check 
to make sure your unit is completed. Contact your dealer 
immediately if anything is missing.
	Due to the difference in applications for each country, some regions may have different accessories.
Documentation: 
	 
NEC Projector CD-ROM (P/N: 7N952121)
		Quick Setup Guide  (P/N: 7N8N5461)
		Important Information (For North America: 7N8N5471) (For...

6English ...
Introduction
1. Control Panel
2. Focus Lever
3. Intake vent
4. Remote Control Sensor
5. Exhaust vent
Projector
Product Overview
6. Speaker 
7. AC IN terminal
8. Input / Output Connections
9. Cover Glass
10. Tilt foot
6
7
8
4
2
5
3
1
10
9 

7... English
Introduction
Connection Ports
1. SERVICE Port (for service purpose only)
2. MONITOR OUT Connector (Separate sync signal only)
3. PC CONTROL Connector
4. COMPUTER IN Connector
5. VIDEO IN Connector
6. HDMI 2 IN Connector
7. HDMI 1/MHL IN Connector
8. AUDIO IN R Connector
9. AUDIO IN L Connector 
10. AUDIO IN Jack (3.5mm mini jack)
11. AUDIO OUT Jack (3.5mm mini Jack)
12. AC IN Terminal
13. KensingtonTM Lock  Port
14. USB TYPE A Connector
15. LAN Connector (RJ-45)
521
12
4
15
7610113
1314
89 

8English ...
Introduction
Control Panel
3
68
7
214
5
1POWER LEDIndicate the projector’s status.
2ENTERConfirm your section of items in sub 
menu operation.
3STATUS LEDIndicate the projector’s temperature 
status.
4LAMP LEDIndicate the projector’s lamp status.
5MENUPress “MENU” to launch the On-
screen display (OSD), back to the top 
level of OSD for the OSD main menu 
operation
6SOURCEPress “SOURCE” to select an input 
signal.
7Four  
Directional 
Select Keys
Use  or  or  or  to select items or 
make...

9... English
Introduction
Attaching the Cable Cover
 Procedure for Attaching the Cable Cover:
 1. Mount the cable cover to the projector. 
	2. Tighten two screws on both sides of the cable cover. 
Cable Cover
 1
 2
 CAUTION:•  Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come off and fall, resulting in injury or damage to the cable cover.•  Do not put bundled cables in the cable cover. Failure to do so may damage the power cord, resulting...

10English ...
Introduction
Remote Control
1POWER ONPower on the projector. Refer 
to the “Power On/Off the 
Projector” section on pages 22-
23.
2POWER OFFPower off the projector.Refer 
to the “Power On/Off the 
Projector” section on pages 22-
23.
345
18
10
11
13
19
24
26
28
30
27
12
1162
823
21
9
25
14
29
31
17
15
67
20
22 

11... English
Introduction
3COMPUTER  1Press “1” to choose Computer IN 
connector.
4COMPUTER  2 No function.
5HDMI  1Press “4” to choose HDMI 1/
MHL IN connector.
6VIDEOPress “VIDEO” to choose VIDEO  
IN connector.
7USB  ANo function.
8ID SETNo function.
9AV-MUTEMomentarily turn off/on the 
audio and video.
10MENUPress “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation
11D-ZOOMZoom in/out the projected 
image. 
12KEYSTONE  
Correction
Adjust the...

12English ...
Introduction
18HDMI  2Press “5” to choose HDMI 2 IN 
connector.
19DISPLAY 
PORT
No function.
20USB  BNo function.
21Number ButtonNo function.
22LANNo function.
23CLEARClear the password while you 
input the password.
24FREEZEFreeze To pause the screen 
image. Press again to resume the 
screen image.
25EXITExit the settings.
26ENTERConfirm your section of items in 
sub menu operation.
27Four  
Directional 
Select Buttons
Use  ,  ,  or  to select items 
or make adjustments to your 
selection....

13... English
Introduction
Battery Installation
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not place the battery upside down.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to your local regulations.
1. Press firmly and slide the battery cover off.
2.  Install new batteries (AAA). 
Ensure that you have the...