NEC Projector Sx6000d User Manual

E – 34
Color Matrix
First, select an appropriate color matrix for your input signal, either
HDTV or SDTV. Then select an appropriate matrix type from B-Y/R-
Y, Cb/Cr, Pb/Pr or IVX.
NOTE: The Color Matrix feature is available for component video signal only.
Y/C Delay (not available for RGB)
Adjusts Y/C delay level.
Telecine
Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto ............. For film source such as a DVD player
Off ................ For signals other than film...

E – 35
Select either the RGB signal type or the Component signal type.
RGB ............. RGB signal
Component .. Composite signals such as YCbCr/YPbPr
NOTE: This feature is available on RGB 1 and 2 only.
Switcher Gain
This feature adjusts the input level of the signal. This must be done
to each color:R, G, and B.
Volume
This feature adjusts the volume of the audio output. Adjust the sound
corresponding to the slot.
Ref Adj
Keystone
This feature corrects the keystone (trapezoidal) distortion to make the...

E – 36
Lamp Output
When selecting Variable, use the slidebar to adjust for desired pro-
jector light output.
Reference White Balance
This feature adjusts the white balance that is used as a reference.
This adjustment affects all sources. The Ref.White Bal. is available
for test pattern only.
Factory Default
Returns all adjustments and settings to the factory preset level.
All Data ....................... Reset all the settings for all the signals to the factory
preset.
NOTE: The items that can be reset...

E – 37
5. To enable your setting, select Active on the Execute Switch.
6. Select OK and press the ENTER button on the remote control to complete
the setting.
NOTE: When On Timer is set and the projector is in the standby mode, the
Status indicator flashes green to show that On Timer program is active. The
projector must be in stand-by mode at the time of turning on. The preset
power-on time will be void if the cooling fan is working or an error occurs.
Unplugging the projector cancels your 1 Week...

E – 38
Setup
Enables you to set operating options.
Press OK to save your changes for all the features of Page1, Page2,
Page3, Page 4 and Page5.
[Page 1]
Orientation
This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection, desk-
top rear projection, and ceiling front projection.
Background
Use this feature to display a blue/ black screen or logo when no
signal is available. The default background is blue.
S-Video Mode Select
This feature is...

E – 39
Keystone Save
This option enables you to save your current keystone settings.
Saving your change once affects all sources. The changes are saved
when you turn off the projector.
Doubler (Video / S-Video Only)
This sets double speed interpolation of the video signal.
On ................ Non-interlaced display
Off ................ Interlaced display
NOTE: The setting will take effect from the next video signal display.
Lens Memory
This function applies the stored lens shift, focus, and zoom adjust-...

E – 40
Source Information
Displays the status of the current signal. This dialog box has three pages.
Projector Information
Displays the information for your projector such as lamp usage, serial
number and version number etc..
[Page 4]
Link Mode
Displaying Current Status of Link Mode
When selecting the tab Page 4 , you will get the following dialog
box.
Master ID .................... Indicates the Master projector
Status ......................... Indicates the status of the master projector
Connected PJ...

E – 41
6. SPECIFICATIONS
Optical
Panel *1DMDTM  .9 x 3
1280 x 1024 native resolution up to 1600 x 1200 with advanced AccuBlendTM Technology
Lamp 1.0kW Bubble Type Short Arc Xenon
Built in: Overheat Protection
Lamp Over-Usage Protection
Light Output SX6000 : 5000 ANSI Lumens (High Bright mode)
4300 ANSI Lumens (Normal mode)
SX4000 : 3500 ANSI Lumens (Variable mode at max)
Full Light Output at 200- 240V
Brightness Uniformity >80% edge to center
Contrast Ratio 400 : 1 Full On/Off
250 : 1 ANSI
Lens Movement...

E – 42
External Control RS232C(1) D-sub 9 pin
Contact Closure
Switcher (2) D-sub 15 pin In/Out
Addressable Remote Control (wired / wireless)
Power Requirement 100-120 / 200-240 VAC, 50/60Hz
Input Current 11 / 7.5 A
Power Consumption 1.1 / 1.5 kW
Mechanical
Installation Orientation: Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
Stacking: Up to 3 projectors can be gravity stacked
Dimensions 22.0 (W) x 26.9 (D) x 11.8 (H) / 560 mm (W) x 682 mm (D) x 300 mm (H)
 with lens hood and foot
(not including...

E – 43
7. Optional Accessories
Lens TL-08SF (Short Focal Lens 0.84) : 10kg
TL-1Z/1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg
TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg
TL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kg
Interface Board XT SDI BOARD
SX HDSDI
X DIGITAL RGB BOARD
Ceiling Mount Kit XT CMKIT
Switcher ISS-6020 Video/RGB Switcher
Three Interface boards are optionally available.
XT SDI BOARD
This board accepts the input of non-compressed signal sources such as commercial type digital VTR(e.g., D1/D5-VCR) compatible with...