NEC Projector PX803UL-WH User Manual

							74
5.	 Select	[CONTROL]	→	[ON]	and	press	the	ENTER	button.
	 Each	[TOP],	[BOTTOM],	[LEFT],	[RIGHT],	and	[BLACK	LEVEL]	has	its	own	[CONTROL],	[MARKER],	[RANGE],	
and	[POSITION].
•	 For	Projector	A,	set	the	[CONTROL]	for	the	[TOP],	[LEFT]	and[BOTT OM]	to	[OFF].	Similarly	for	Projector	B,	set	
the	[CONTROL]	for	the	[TOP],	[RIGHT]	and	[BOTTOM]	to	[OFF].
②	Adjust	[RANGE]	and	[POSITION]	to	determine	an	area	of	overlapped	edges	of	images	
projected from each projector.
Turning	on	[MARKER]	will	display	markers	in	magenta	and	green.
The	magenta	marker	is	used	for	[RANGE]	and	green	one	for	[POSITION].
[RANGE]
(Determine	an	area	of	o
verlapped	edges	of	images.)
[POSITION]
(Deter

mine
	the	position	of	o
 verlapped
	edges	of	images
 .)
Green
	mar

ker
Turn
	on	[RIGHT]
Magenta
	mar

ker Turn
	on	[LEFT]
Magenta
	mar

ker
*	 The	2	screens	are	separated	in	the	diagram	for	explanatory	purposes.
4. Multi-Screen Projection  
						

							75
1	 Adjust	[RANGE].
	 Use	the	◀	or	▶	button	to	adjust	the	overlapped	area.
TIP:
•	 Adjust	to	overlap	one	projector’	marker	with	the	other	projector’s	marker.
2	 Adjust	[POSITION].
	 Use	the	◀	or	▶	button	to	align	one	edge	with	the	other	edge	of	overlapped	images.
TIP:
•	 When	displaying	a	signal	with	a	different	resolution,	perform	the	Edge	Blending	function	from	the	start.	
•	 Setting	of	[MARKER]	will	not	be	saved	and	return	to	[OFF]	when	the	projector	is	turned	off.	
•	 To	display	or	hide	the	marker	while	the	projector	is	running,	turn	on	or	off	[MARKER]	from	the	menu.
4. Multi-Screen Projection  
						

							76
Black Level Adjustment
This	adjusts	the	black	lev el	of	the	ov erlapping	area	and	the	non-ov erlapping	area	of	the	multi-screen	(EDGE	BLENDING).
Adjust	the	brightness	level	if	you	feel	the	difference	is	too	large.
NOTE: 
This	function	is	enabled	only	when	[MODE]	is	turned	on.
Adjustable	area	varies	depending	on	what	combination	of	[TOP],	[BOTTOM],	[LEFT]	and	[RIGHT]	are	turned	on.
Example:	Adjusting	the	Black	Le vel	when	placing	tw o	pr ojectors	side	b y	side
Width	of	overlap
Adjust
	[CENTER] Adjust	[CENTER]
Projector
	A’

s
	image Projector	B’

s
	image
Adjust
	[CENTER-RIGHT] Adjust	[CENTER-LEFT]
1.	 Turn	on	[MODE]
2.	 Select	[BLACK	LEVEL]	and	press	the	ENTER	button.
	 The	screen	will	switch	to	the	black	level	adjustment	screen.
3. Use the ▼ or ▲ button to select an item and use the ◀ or ▶ to adjust the black level.
	 Do	this	for	the	other	projector	if	necessary.
4. Multi-Screen Projection  
						

							77
9-segmented	portions	for	Black	Level	adjustment
The	center	projector
This	function	adjusts	the	brightness	level	of	9-segmented	portions	for	the	center	projector	and	4-segmented	portions	
for	the	left	bottom	projector	as	shown	below.
TOP-LEFT
BOTTOM-LEFT CENTER-
LEFT TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•	 The	number	of	black	level	division	screens	(maximum	of	nine	divisions)	changes	depending	on	the	number	of	edge	blending	
positions	selected	(top,	bottom,	right,	left).	In	addition,	when	the	top	/	bottom	and	left	/	right	ends	are	selected,	the	corner	division	
screen appears.
•	 The	edge	blending	width	is	the	width	set	in	the	range	and	the	corner	is	formed	by	the	intersecting	area	of	the	top	/	bottom	ends	
or	left	/	right	ends.
•	 The	[BLACK	LEVEL]	can	be	adjusted	to	make	it	brighter	only.
4. Multi-Screen Projection  
						

							78
5. Using On-Screen Menu
❶ Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	depending	on	input	signal	and	the	projector	setting.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE:	The	commands	such	as ENTER,	EXIT,	▲▼, ◀▶	in	the	bottom	show	available	buttons	for	your	operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3.	 Press	the	ENTER	button	on	the	remote	control	or	the	projector	cabinet	to	highlight	the	top	item	or	the	first	
tab.
4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or 
set.
 You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.
5. Press the ENTER button on the remote contr ol or the projector cabinet to display the submenu window.
6.	 Adjust	the	level	or	turn	the	selected	item	on	or	off	by	using	the	▲▼◀▶ buttons on the remote control or 
the projector cabinet.
	 Changes	are	stored	until	adjusted	again.
7. Repeat steps 2-6 to adjust an additional item, or press the EXIT button on the remote control or the projec-
tor cabinet to quit the menu display.
NOTE:	When	a	menu	or	message	is	displayed,	several	lines	of	information	may	be	lost,	depending	on	the	signal	or	settings.
8. Press the MENU button to c lose the menu.
 To return to the previous menu, press the EXIT button. 
						

							79
❷ Menu Elements
Slide	bar
Solid	triangle
Menu	mode
Ta b
Radio	button
HIGH	symbol
LIGHT	MODE	symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight �����������������������������Indicates the selected menu or item� 
Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Ta b ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�
Radio button �����������������������Use this round button to select an option in a dialog box�
Source ��������������������������������Indicates the currently selected source�
Menu mode ������������������������Indicates the current menu mode: BASIC or ADVANCED�
Off Timer remaining time ����Indicates the remaining countdown time when the [OFF TIMER] is preset�
Slide bar �����������������������������Indicates settings or the direction of adjustment�
LIGHT MODE symbol ����������Indicates [LIGHT MODE] is set�
Key Lock symbol ����������������Indicates the [CONTROL PANEL LOCK] is enabled�
Thermometer symbol ���������Indicates the [LIGHT MODE] is forcibly set to [ECO] mode because the internal temperature is too 
high�
HIGH symbol ����������������������Indicates the [FAN MODE] is set to [HIGH] mode�
Source
Available	buttons
Thermometer	symbol
Key	Lock	symbol
Off	Timer	remaining	time
Highlight
5. Using On-Screen Menu  
						

							80
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.*1	 The	[GAMMA	CORRECTION]	item	is	available	when	an	item	other	than	[DICOM	SIM.]	is	selected	for	[REFERENCE].*2	 The	[SCREEN	SIZE]	item	is	available	when	[DICOM	SIM.]	is	selected	for	[REFERENCE].*3	 When	[PRESENTATION]	or	[HIGH-BRIGHT]	is	selected	in	[REFERENCE],	the	[COLOR	TEMPERATURE]	is	not	available.*4	 The	[INPUT	RESOLLUTION]	item	is	available	when	either	COMPUTER	or	BNC	signal	is	selected	as	the	input	terminal.
•	Basic	menu	items	are	indicated	by	shaded	area.❸ List of Menu Items
Some	menu	items	are	not	available	depending	on	the	input	source.
Menu ItemDefaultOptions
INPUT HDMI
*
DisplayPort *
BNC *
BNC(CV) *
BNC(Y/C) *
COMPUTER *
HDBaseT
SLOT
ENTRY LIST
TEST PATTERN
ADJUST PICTURE MODE
STANDARDSTANDARD, PROFESSIONAL
PRESET *HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, 
DICOM SIM�, EDGE BLENDING
DETAIL SETTINGS GENERAL
REFERENCE *HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, 
DICOM SIM�, EDGE BLENDINGGAMMA 
CORRECTION*1SELECT
DYNAMIC, NATURAL, BLACK DETAIL
REFERENCE
SCREEN SIZE*
2* LARGE, MEDIUM, SMALL
COLOR TEMPERATURE*3*
DYNAMIC CONTRAST *OFF, ON
Brilliant Color *OFF, MEDIUM, HIGH
WHITE BALANCE CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
COLOR CORRECTION
RED HUE
0
SATURATION
GREEN HUE
0
SATURATION
BLUE HUE
0
SATURATION
YELLOW HUE
0
SATURATION
MAGENTA HUE
0
SATURATION
CYAN HUE
0
SATURATION
CONTRAST 0
BRIGHTNESS 0
SHARPNESS 0
COLOR 0
HUE 0
RESET
IMAGE 
OPTIONS CLOCK
*
PHASE *
HORIZONTAL *
VERTICAL *
BLANKING *TOP, BOTTOM, LEFT, RIGHT
OVERSCAN AUTOAUTO, 0[%], 5[%], 10[%]
ASPECT RATIO AUTO
(COMPUTER) AUTO, 4:3, 5:4, 16:9, 15:9, 16:10, FULL, NATIVE
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3, LETTERBOX, WIDE 
SCREEN, ZOOM
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3 WINDOW, LETTERBOX, 
WIDE SCREEN, FULL
INPUT RESOLUTION*
4* –
5. Using On-Screen Menu  
						

							81
Menu ItemDefaultOptions
ADJUST VIDEO
NOISE REDUCTION
RANDOM NR
OFFOFF, LOW, MEDIUM, HIGH
MOSQUITO NR OFFOFF, LOW, MEDIUM, HIGH
BLOCK NR OFFOFF, LOW
DEINTERLACE NORMALNORMAL, MOVIE, STILL
CONTRAST 
ENHANCEMENT MODE
AUTOOFF, AUTO, NORMAL
GAIN
SIGNAL TYPE AUTOAUTO, RGB, COMPONENT
VIDEO LEVEL AUTOAUTO, NORMAL, ENHANCED, SUPER WHITE
3D SETTINGS FORMAT
AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE 
BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE 
ALTERNATIVE
L/R INVERT OFFOFF, ON
LENS 
MEMORY STORE
MOVE
RESET
DISPLAY PIP/PICTURE 
BY PICTURE
SUB INPUT
OFF, HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, 
HDBaseT, SLOT
MODE PIPPIP, PICTURE BY PICTURE
PICTURE SWAP OFFOFF, ON
PIP SETTING START POSITION
TOP-LEFTTOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHT
HORIZONTAL POSITION
VERTICAL POSITION
SIZE MEDIUMLARGE, MEDIUM, SMALL
BORDER
GEOMETRIC 
CORRECTION KEYSTONE
HORIZONTAL
VERTICAL
TILT
THROW RATIO
CORNERSTONE TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, 
BOTTOM, BOTTOM-RIGHT
HORIZONTAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, 
BOTTOM, BOTTOM-RIGHT
VERTICAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, 
BOTTOM, BOTTOM-RIGHT
PINCUSHION TOP
BOTTOM
LEFT
RIGHT
PC TOOL OFFOFF, 1, 2, 3
RESET
EDGE 
BLENDING MODE
OFFOFF, ON
TOP CONTROL
ONOFF, ON
MARKER ONOFF, ON
RANGE
POSITION
BOTTOM CONTROL
ONOFF, ON
MARKER ONOFF, ON
RANGE
POSITION
LEFT CONTROL
ONOFF, ON
MARKER ONOFF, ON
RANGE
POSITION
RIGHT CONTROL
ONOFF, ON
MARKER ONOFF, ON
RANGE
POSITION
BLACK LEVEL TOP-LEFT
TOP-CENTER
TOP-RIGHT
CENTER-LEFT
CENTER
CENTER-RIGHT
BOTTOM-LEFT
BOTTOM-CENTER
BOTTOM-RIGHT
5. Using On-Screen Menu  
						

							82
Menu ItemDefaultOptions
DISPLAY MULTI 
SCREEN WHITE BALANCE
MODE
OFFOFF, ON
CONTRAST W
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS W
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
PICTURE SETTING MODE
OFFOFF, ZOOM, TILING
ZOOM HORIZONTAL ZOOM
VERTICAL ZOOM
HORIZONTAL POSITION
VERTICAL POSITION
TILING WIDTH
1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HEIGHT 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HORIZONTAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
VERTICAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
SETUP MENU
LANGUAGE
ENGLISHENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 
日本語
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, 
NEDERLANDS, SUOMI
NORSK, TÜRKÇE, РУССКИЙ, 
, Ελληνικά, 中文, 한국어
ROMÂNĂ, HRVATSKA, БЪЛ\fАРСКИ, INDONESIA, हिन्दी , ไทย, 
, 繁體中文COLOR SELECT COLORCOLOR, MONOCHROME
INPUT DISPLAY ONOFF, ON
MESSAGE DISPLAY ONOFF, ON
ID DISPLAY ONOFF, ON
3D CAUTION MESSAGE ONOFF, ON
DISPLAY TIME AUTO 45 
SEC MANUAL, AUTO  5 SEC, AUTO 15 SEC, AUTO 45 SEC
INSTALLA-
TION(1) ORIENTATION  
AUTOAUTO, DESKTOP FRONT, CEILING REAR, DESKTOP REAR, 
CEILING FRONT
SCREEN TYPE FREEFREE, 4:3 SCREEN, 16:9 SCREEN, 16:10 SCREEN
WALL COLOR OFFOFF, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT 
GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK
FAN MODE AUTOAUTO, HIGH
LIGHT MODE LIGHT MODE
NORMALNORMAL, ECO1, ECO2
CONSTANT BRIGHTNESS OFFOFF, ON
ADJUST  20–100%
REF� WHITE BALANCE 
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
3D GLASSES DLP® LinkDLP® Link, OTHERS
INSTALLA-
TION(2) SHUTTER SETTINGS
POWER ON SHUTTER
OPENOPEN, CLOSE
PICTURE MUTE SHUTTER OPENOPEN, CLOSE
FADE IN TIME
0–10 sec�FADE OUT TIME0–10 sec�
REF� LENS MEMOR Y
PROFILE 11, 2
STORE
MOVE
RESET
LOAD BY SIGNAL OFFON, OFF
FORCED MUTE OFFON, OFF
LENS CALIBRATION
LENS POSITION HOME
TYPE
NP39ML
5. Using On-Screen Menu  
						

							83
Menu ItemDefaultOptions
SETUP CONTROL TOOLSADMINISTRA-
TOR MODE
MENU MODE
ADVANCEDADVANCED, BASIC
NOT SAVE SETTING VALUES OFFOFF, ON
NEW PASSWORD
CONFIRM PASSWORD
PROGRAM 
TIMER ENABLE
OFFOFF, ON
SETTINGS EDITACTIVE
OFF, ON
D AY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY 
D AY
TIME
FUNCTION POWER, INPUT, LIGHT MODE
ADVANCED 
SETTINGS POWER OFFOFF, ON
INPUT HDMIHDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, 
HDBaseT, SLOT
LIGHT MODE NORMALNORMAL, ECO1, ECO2
REPEAT OFFOFF, ON
DELETE
UP
DOWN
BACK
DATE AND TIME 
SETTINGS TIME 
ZONE 
SETTIMGS
GMT -12:00, -11:30, -11:00, -10:30, -10:00, -09:30, -09:00, -08:30, 
-08:00, -07:30, -07:00, -06:30, -06:00, -05:30, -05:00, -04:30, 
-04:00, -03:30, -03:00, -02:30, -02:00, -01:30, -01:00, -00:30, 
00:00, +00:30, +01:00, +01:30, +02:00, +02:30, +03:00, +03:30, 
+04:00, +04;30, +05:00, +05:30, +06:00, +06:30, +07:00, +07:30, 
+08:00, +08:30, +09:00, +09:30, +10:00, +10:30, +11:00, +11:30, 
+12:00, +12:30, +13:00
DATE 
AND TIME 
SETTINGS DATE  MM/DD/YYYY
TIME  HH:MM
INTERNET TIME 
SERVER
OFF
OFF, ON
IP ADDRESS
UPDATE
SUMMER 
TIME 
SETTINGS ENABLE
OFFOFF, ON
MON(START) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(START) FIRST, SECOND, THIRD, FOURTH, LAST
SUN, MON, TUE, WED, THU, FRI, SAT
TIME(START)
MON(EXIT) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(EXIT) FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST 
WEEK
SUN, MON, TUE, WED, THU, FRI, SAT
TIME(EXIT)
TIME DIFFERENCE +01:00, +00:30, -00:30, -01:00
MOUSE
(Note) Cannot be used for this device�CONTROL PANEL LOCK OFFOFF, ON
SECURITY OFFOFF, ON
COMMUNICATION SPEED 38400bps4800bps, 9600bps, 19200bps, 38400bps, 115200bps
CONTROL ID CONTROL ID NUMBER
11–254
CONTROL ID OFFOFF, ON
REMOTE SENSOR FRONT/
BACK FRONT/BACK, FRONT, BACK, HDBase-T
5. Using On-Screen Menu