NEC Projector PX700W2 User Manual

197
5	 Select	a	folder	saving	the	file	to	be	disclosed	to	the	participants,	and 	 click 	 [OK].
 The file in the selected folder will be displayed in the list of files to transfer.
6	 Click	[Download].
 The file will be shown to the participants.
NOTE:
When	the	computer 	is 	connected 	to 	the 	projector , 	the 	computer 	screen 	that 	is 	in 	of 	being 	progress 	is 	also 	projected 	from 	the 	projec-
tor.	To	manipulate	a	screen	that	should	not	be	shown	(not	projected),	temporarily	stop	the...

198
3	 Click	the	Meeting	Name	to	participate,	and 	 click 	 [Connect].
3Click
 The computer will be connected to the selected conf erence and the attendant window will be displayed.
	 If	the	presenter 	selects 	“Send 	to 	PC 	And 	Projector”, 	the 	image 	projected 	from 	the 	projector 	is 	displa yed 	in 	the 	at-
tendant window.
8. User Supportware  

199
•	Saving	received	images
1	 Click	[Memo]	in	the	attendant	window.
 A memo pane will be displayed.
2
1
Click
Memo paneClick
2	 Click	[Save	Image]	in	the	attendant	window.
 The image displa yed in the attendant window will be saved.
•	 The	saved	image	is	added	to	the	memo	list	and	a	thumbnail	is	displayed.
•	 A	memo	can	be	attached	to	the	saved	image.
REFERENCE:
•	 In	case	of 	Windows 	XP , 	a 	created 	file 	is 	saved 	to 	“My 	Documents\ImageExpress\” 	under 	the 	default 	settings. 	In 	case 	of...

200
•	Downloading	disclosed	file
1	 Click	[File	Transfer] 	 in 	 the 	 attendant 	 window.
 The “File Transfer” window will be opened.
1Click
2	 Select	a	file	to	download,	and 	 click 	 [Download].
 Downloading will begin.
 The progress of the downloading is displayed at the lower left of the window.
3	 When	downloading	is	complete,	 click 	 [File] 	 in 	 the 	“File 	T ransfer”	 window,	 and 	 click 	 [Exit].
 The “File Transfer” window will be closed.
REFERENCE:
•	 If	“Open	After 	Downloading” 	is...

201
•	Changing	presenter
Three	types	of 	settings 	ma y 	be 	made 	to 	change 	the 	presenter :	“Not 	Appro ved”, 	“Appro ved”, 	and 	“Changing 	Prohibited”	
(these	can	be	selected	only	by	the	presenter).
In	the	following	example,	“Not	 Approved”	 is 	 selected.
•	 Click	[Become	A	Presenter]	in	the	attendant	window.
 You will change from a participant to a presenter.
1Click
•	Leaving	conference
Leave	the	conference	and	exit	Image	Express	Utility	2.0.
•	 Click	[File]	in	the	attendant	window,	and 	 click...

202
❸ Controlling the Projector over a LAN (PC Control Utility Pro 4)
Using	the	utility	software	“PC	 Control 	 Utility 	 Pro 	 4”, 	 the 	 projector 	 can 	 be 	 controlled 	 from 	 a 	 computer 	 over 	 a 	 LAN.
Control Functions
Power	On/Off,	signal	selection,	picture	freeze,	picture	mute,	adjusting,	error	message	notification,	event	schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	pro vides 	an 	outline 	of 	prepar ation 	f or 	use 	of 	PC 	Control 	Utility 	Pro 	4.	F or 	inf ormation 	on...

203
❹ Projecting Your Mac’s Screen Image from the Projector over 
a LAN (Image Express Utility 2 for Mac)
Using	Image	Express 	Utility 	2 	f or 	Mac 	contained 	allo ws 	y ou 	to 	send 	the 	Mac’ s 	screen 	image 	to 	the 	projector 	o ver 	a 	
network	(wired	or	wireless	LAN).
Image	Express	Utility	2	for	Mac	runs	on	Mac	OS	X	10.2.8	or	later.
It	runs	on	both	Mac	OS	X	(PowerPC)	and	Mac	OS	X	(Intel).
Hereafter,	“Image	 Express 	 Utility 	 2 	 for 	 Mac”	 is 	 abbreviated 	 as 	“Image 	 Express 	 Utility...

204
Using Image Express Utility 2
Connecting to a projector
1	 Confirm	that	the	projector	has	been	turned	on.
2	 Click	the	AirPort	status	(		)	on	the	Macintosh	menu	bar,	and 	 click 	“T urn 	 AirPort 	 On”.
 The AirPort status is changed to “  ” or “  ”.
•	 AirPort	status	types	and	meanings
 ...AirPort : Off
 ...AirPort : On ( in infrastructure connection )
 ...AirPort : On ( in adhoc connection )
REFERENCE:
When the AirPort status (  /  / 	)	is	not	displayed	on	the	menu	bar:
1	 Click	Apple	Menu	(		)	and...

205
3	 Double-click	the	“Image 	 Express 	 Utility 	 2”	 icon 	 in 	 the 	“Ima ge 	 Express 	 Utility 	 2”	 folder.
•	 At	the	initial	start,	the	“License	 Agreement”	 window 	 is 	 displayed.	
	 Thoroughly	read	the 	ag reement 	sho wn 	on 	the 	screen, 	and 	clic k 	“I 	accept 	the 	ter ms 	in 	the 	license 	ag reement”	
and the [OK] button.
 Next, the “Authenticate” window will be displayed.
4	 Enter	the	administrator	name	and	password	of	your	Macintosh	computer,	and 	 click 	 the 	 [OK] 	 button.
 The...

206
Stopping/Restarting  Image Transmission
•	Stopping	image	transmission
1	 Click	[Tools]	on	the	menu	bar,	and 	 click 	 [Stop 	 Sending].
	 Image	transmission	is	temporarily	stopped.
•	Restarting	image	transmission
1	 Click	[Tools]	on	the	menu	bar,	and 	 click 	 [Start 	 Sending].
	 Image	transmission	is	started	again.
Exiting	Image	Express	Utility	2
1	 Click	[Image	Express	Utility	2]	on	the	menu	bar,	 and 	 click 	 [Quit 	 Image 	 Express 	 Utility 	 2].
	 Image	Express	Utility	2	is	exited.
8. User...