NEC Projector PH1202HL User Manual

							66
Black Level Adjustment
This	adjusts	the	black	lev el	of	the	ov erlapping	area	and	the	non-ov erlapping	area	of	the	multi-screen	(EDGE	BLENDING).
Adjust	the	brightness	level	if	you	feel	the	difference	is	too	large.
NOTE: 
This	function	is	enabled	only	when	[MODE]	is	turned	on.
Adjustable	area	varies	depending	on	what	combination	of	[TOP],	[BOTTOM],	[LEFT]	and	[RIGHT]	are	turned	on.
Example:	Adjusting	the	Black	Le vel	when	placing	tw o	pr ojectors	side	b y	side
Width	of	overlap
Adjust
	[CENTER] Adjust	[CENTER]
Projector
	A’

s
	image Projector	B’

s
	image
Adjust
	[CENTER-RIGHT] Adjust	[CENTER-LEFT]
1.	 Turn	on	[MODE]
2.	 Select	[BLACK	LEVEL]	and	press	the	ENTER	button.
	 The	screen	will	switch	to	the	black	level	adjustment	screen.
3. Use the ▼ or ▲ button to select an item and use the ◀ or ▶ to adjust the black level.
	 Do	this	for	the	other	projector	if	necessary.
4. Multi-Screen Projection  
						

							67
9-segmented	portions	for	Black	Level	adjustment
The	center	projector
This	function	adjusts	the	brightness	level	of	9-segmented	portions	for	the	center	projector	and	4-segmented	portions	
for	the	left	bottom	projector	as	shown	below.
TOP-LEFT
BOTTOM-LEFT CENTER-
LEFT TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•	 The	number	of	black	level	division	screens	(maximum	of	nine	divisions)	changes	depending	on	the	number	of	edge	blending	
positions	selected	(top,	bottom,	right,	left).	In	addition,	when	the	top	/	bottom	and	left	/	right	ends	are	selected,	the	corner	division	
screen appears.
•	 The	edge	blending	width	is	the	width	set	in	the	range	and	the	corner	is	formed	by	the	intersecting	area	of	the	top	/	bottom	ends	
or left / right ends.
•	 The	[BLACK	LEVEL]	can	be	adjusted	to	make	it	brighter	only.
4. Multi-Screen Projection  
						

							68
5. Using On-Screen Menu
❶ Using the Menus
NOTE: The on-screen menu may not be displayed correctly depending on inp\
ut signal and the projector setting.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER,	EXIT,	▲▼, ◀▶ in the bottom show available buttons for your operation.
2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3. Press the ENTER button on the remote contr ol or the projector cabinet to highlight the top item or the first 
tab.
4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or 
set.
 You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.
5. Press the ENTER button on the remote contr ol or the projector cabinet to display the submenu window.
6.	 Adjust	the	level	or	turn	the	selected	item	on	or	off	by	using	the	▲▼◀▶ buttons on the remote control or 
the projector cabinet.
	 Changes	are	stored	until	adjusted	again.
7. Repeat steps 2-6 to adjust an additional item, or press the EXIT button on the remote control or the projec-
tor cabinet to quit the menu display.
NOTE:	When	a	menu	or	message	is	displayed,	several	lines	of	information	may	be	lost,	depending	on	the	signal	or	settings.
8. Press the MENU button to c lose the menu.
 To return to the previous menu, press the EXIT button. 
						

							69
Menu Elements
Slide	bar
Solid	triangle
Menu	mode
Ta b
Radio	button
LIGHT	MODE	symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight .............................Indicates the selected menu or item. 
Solid triangle
 ......................Indicates further choices are available. A highlighted triangle indicate\
s the item is active. 
Ta b
 ......................................Indicates a group of features in a dialog box. Selecting on any tab brin\
gs its page to the front.
Radio button
 .......................Use this round button to select an option in a dialog box.
Source
 ................................Indicates the currently selected source.
Menu mode
 ........................Indicates the current menu mode: BASIC or ADVANCED.
Off Timer remaining time
 ....Indicates the remaining countdown time when the [OFF TIMER] is preset.
Slide bar
 .............................Indicates settings or the direction of adjustment.
LIGHT MODE symbol
 ..........Indicates [LIGHT MODE] is set.
Key Lock symbol
 ................Indicates the [CONTROL PANEL LOCK] is enabled.
Thermometer symbol
 .........Indicates the [LIGHT MODE] is forcibly set to [ECO] mode because the internal temperature is too 
high.
HIGH symbol
 ......................Indicates the [FAN MODE] is set to [HIGH] mode.
Source
Available	buttons
Thermometer	symbol
Key	Lock	symbol
Off	Timer	remaining	time
Highlight
5. Using On-Screen Menu  
						

							70
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.*1	 The	[GAMMA	CORRECTION]	item	is	available	when	an	item	other	than	[DICOM	SIM.]	is	selected	for	[REFERENCE].*2	 The	[SCREEN	SIZE]	item	is	available	when	[DICOM	SIM.]	is	selected	for	[REFERENCE].*3	 When	[PRESENTATION]	or	[HIGH-BRIGHT]	is	selected	in	[REFERENCE],	the	[COLOR	TEMPERATURE]	is	not	available.
•	Basic	menu	items	are	indicated	by	shaded	area.❷ List of Menu Items
Some	menu	items	are	not	available	depending	on	the	input	source.
Menu ItemDefaultOptions
INPUT HDMI
*
DisplayPort *
BNC *
BNC(CV) *
BNC(Y/C) *
COMPUTER *
HDBaseT
SLOT
ENTRY LIST
TEST PATTERN
ADJUST PICTURE MODE
STANDARDSTANDARD, PROFESSIONAL
PRESET *HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, 
DICOM SIM.
DETAIL SETTINGS GENERAL
REFERENCE *HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, 
DICOM SIM.
GAMMA CORRECTION*
1SELECT DYNAMIC, NATURAL, BLACK DETAIL
NATURAL SETTING
SCREEN SIZE*
2* LARGE, MEDIUM, SMALL
COLOR TEMPERATURE*3*
DYNAMIC CONTRAST *OFF, MOTION IMAGE, STILL IMAGE
WHITE BALANCE CONTRAST R 0
CONTRAST G 0
CONTRAST B 0
BRIGHTNESS R 0
BRIGHTNESS G 0
BRIGHTNESS B 0
COLOR CORRECTION RED 0
GREEN 0
BLUE 0
YELLOW 0
MAGENTA 0
CYAN 0
CONTRAST 50
BRIGHTNESS 50
SHARPNESS 10
COLOR 50
HUE 0
RESET
IMAGE 
OPTIONS CLOCK
*
PHASE *
HORIZONTAL *
VERTICAL *
BLANKING *TOP, BOTTOM, LEFT, RIGHT
OVERSCAN AUTOAUTO, 0[%], 5[%], 10[%]
ASPECT RATIO AUTO
(COMPUTER) AUTO, 4:3, 5:4, 16:9, 15:9, 16:10, NATIVE
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3, LETTERBOX, WIDE 
SCREEN, ZOOM
AUTO (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3 WINDOW, LETTERBOX, 
WIDE SCREEN, FULL
INPUT RESOLUTION *–
VIDEO NOISE REDUCTION
RANDOM NR
OFFOFF, LOW, MEDIUM, HIGH
MOSQUITO NR OFFOFF, LOW, MEDIUM, HIGH
BLOCK NR OFFOFF, LOW
DEINTERLACE NORMALNORMAL, MOVIE, STILL
CONTRAST 
ENHANCEMENT MODE
AUTOOFF, AUTO, NORMAL
GAIN
SIGNAL TYPE AUTOAUTO, RGB, COMPONENT
VIDEO LEVEL AUTOAUTO, NORMAL, ENHANCED, SUPER WHITE
3D SETTINGS STEREO VIEWER
SINGLE, DUAL LEFT, DUAL RIGHT
FORMAT AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE 
BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE 
ALTERNATIVE
L/R INVERT OFFOFF, ON
LENS 
MEMORY STORE
MOVE
RESET
5. Using On-Screen Menu  
						

							71
Menu ItemDefaultOptions
DISPLAY PIP/PICTURE 
BY PICTURE
SUB INPUT
OFFOFF, HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, 
HDBaseT, SLOT
MODE PIPPIP, PICTURE BY PICTURE
PICTURE SWAP OFFOFF, ON
PIP SETTING START POSITION
TOP-LEFTTOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHT
HORIZONTAL POSITION
VERTICAL POSITION
SIZE MEDIUMLARGE, MEDIUM, SMALL
BORDER
GEOMETRIC 
CORRECTION KEYSTONE
HORIZONTAL
VERTICAL
TILT
THROW RATIO
CORNERSTONE TOP-LEFT, TOP-CENTER, TOP-RIGHT, CENTER-LEFT, CENTER-
RIGHT, BOTTOM-LEFT, BOTTOM-CENTER, BOTTOM-RIGHT
HORIZONTAL CORNER TOP-LEFT, TOP-CENTER, TOP-RIGHT, CENTER-LEFT, CENTER-
RIGHT, BOTTOM-LEFT, BOTTOM-CENTER, BOTTOM-RIGHT
VERTICAL CORNER TOP-LEFT, TOP-CENTER, TOP-RIGHT, CENTER-LEFT, CENTER-
RIGHT, BOTTOM-LEFT, BOTTOM-CENTER, BOTTOM-RIGHT
PINCUSHION TOP, BOTTOM, LEFT, RIGHT
PC TOOL OFFOFF, 1, 2, 3
RESET
EDGE 
BLENDING MODE
OFFOFF, ON
TOP CONTROL
ONOFF, ON
MARKER OFFOFF, ON
RANGE
POSITION
BOTTOM CONTROL
ONOFF, ON
MARKER OFFOFF, ON
RANGE
POSITION
LEFT CONTROL
ONOFF, ON
MARKER OFFOFF, ON
RANGE
POSITION
RIGHT CONTROL
ONOFF, ON
MARKER OFFOFF, ON
RANGE
POSITION
BLACK LEVEL TOP-LEFT
TOP-CENTER
TOP-RIGHT
CENTER-LEFT
CENTER
CENTER-RIGHT
BOTTOM-LEFT
BOTTOM-CENTER
BOTTOM-RIGHT
MULTI 
SCREEN WHITE BALANCE
MODE
OFFOFF, ON
CONTRAST W
CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS W
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
PICTURE SETTING MODE
OFFOFF, ZOOM, TILING
ZOOM HORIZONTAL ZOOM
VERTICAL ZOOM
HORIZONTAL POSITION
VERTICAL POSITION
TILING WIDTH
1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HEIGHT 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITS
HORIZONTAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
VERTICAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT
5. Using On-Screen Menu  
						

							72
Menu ItemDefaultOptions
SETUP MENU
LANGUAGE
ENGLISHENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 
日本語
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, 
NEDERLANDS, SUOMI
NORSK, TÜRKÇE, РУССКИЙ, 
, Ελληνικά, 中文, 한국어
ROMÂNĂ, HRVATSKA, БЪЛ\fАРСКИ, INDONESIA, हिन्दी , ไทย, 
, 繁體中文COLOR SELECT COLORCOLOR, MONOCHROME
INPUT DISPLAY ONOFF, ON
MESSAGE DISPLAY ONOFF, ON
ID DISPLAY ONOFF, ON
3D CAUTION MESSAGE ONOFF, ON
DISPLAY TIME AUTO 45 
SEC MANUAL, AUTO  5 SEC, AUTO 15 SEC, AUTO 45 SEC
FILTER MESSAGE OFFOFF, 100[H], 500[H], 1000[H], 2000[H], 5000[H], 10000[H], 
20000[H]
INSTALLATION ORIENTATION
DESKTOP 
FRONT DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING 
FRONT
SCREEN TYPE FREEFREE, 4:3 SCREEN, 16:9 SCREEN, 16:10 SCREEN
WALL COLOR OFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT 
YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, 
PINK
FAN MODE AUTOAUTO, HIGH
LIGHT MODE LIGHT MODE
NORMALNORMAL, ECO1, ECO2, LONG LIFE
CONSTANT BRIGHTNESS OFFOFF, ON
ADJUST  30–100%
SHUTTER SETTINGS POWER ON SHUTTER
OPENOPEN, CLOSE
PICTURE MUTE SHUTTER OPENOPEN, CLOSE
FADE IN TIME 0–10 SEC
FADE OUT TIME 0–10 SEC
REF. WHITE BALANCE  CONTRAST R
CONTRAST G
CONTRAST B
BRIGHTNESS R
BRIGHTNESS G
BRIGHTNESS B
UNIFORMITY R
UNIFORMITY B
REF. LENS MEMORY PROFILE
11, 2
STORE
MOVE
RESET
LOAD BY SIGNAL OFFOFF, ON
FORCED MUTE OFFOFF, ON
LENS CALIBRATION
5. Using On-Screen Menu  
						

							73
Menu ItemDefaultOptions
SETUP CONTROL TOOLSADMINISTRA-
TOR MODE
MENU MODE
ADVANCEDADVANCED, BASIC
NOT SAVE SETTING VALUES OFFOFF, ON
NEW PASSWORD
CONFIRM PASSWORD
PROGRAM 
TIMER ENABLE
OFFOFF, ON
SETTINGS EDITACTIVE
OFF, ON
D AY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY 
D AY
TIME
FUNCTION POWER, INPUT, LIGHT MODE
ADVANCED 
SETTINGS POWER OFF, ON
INPUT HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, 
HDBaseT, SLOT
LIGHT MODE NORMAL, ECO1, ECO2
REPEAT OFF, ON
DELETE
UP
DOWN
BACK
DATE AND TIME 
SETTINGS TIME 
ZONE 
SETTIMGS
GMT -12:00, -11:30, -11:00, -10:30, -10:00, -09:30, -09:00, -08:30, 
-08:00, -07:30, -07:00, -06:30, -06:00, -05:30, -05:00, -04:30, 
-04:00, -03:30, -03:00, -02:30, -02:00, -01:30, -01:00, -00:30, 
00:00, +00:30, +01:00, +01:30, +02:00, +02:30, +03:00, +03:30, 
+04:00, +04;30, +05:00, +05:30, +06:00, +06:30, +07:00, +07:30, 
+08:00, +08:30, +09:00, +09:30, +10:00, +10:30, +11:00, +11:30, 
+12:00, +12:30, +13:00
DATE 
AND TIME 
SETTINGS DATE  MM/DD/YYYY
TIME  HH:MM
INTERNET TIME 
SERVER
OFF, ON
IP ADDRESS
UPDATE
SUMMER 
TIME 
SETTINGS ENABLE
OFF, ON
MON(START) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(START) FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST 
WEEK
SUN, MON, TUE, WED, THU, FRI, SAT
TIME(START)
MON(EXIT) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
DAY(EXIT) FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST 
WEEK
SUN, MON, TUE, WED, THU, FRI, SAT
TIME(EXIT)
TIME DIFFERENCE +01:00, +00:30, -00:30, -01:00
MOUSE (Note) Cannot be used for this device.
CONTROL PANEL LOCK OFFOFF, ON
NOTIFICATION SETTINGS REAR LED
ONOFF, ON
BUZZER ONOFF, ON
SECURITY OFFOFF, ON
COMMUNICATION SPEED 38400bps4800bps, 9600bps, 19200bps, 38400bps, 115200bps
CONTROL ID CONTROL ID NUMBER
11–254
CONTROL ID OFFOFF, ON
REMOTE SENSOR FRONT/
BACK FRONT/BACK, FRONT, BACK, HDBaseT
LENS TYPE WITH 
SENSOR WITH SENSOR, WITHOUT SENSOR
5. Using On-Screen Menu  
						

							74
Menu ItemDefaultOptions
SETUP NETWORK 
SETTINGS WIRED LAN
PROFILES
DISABLE, PROFILE 1, PROFILE 2
DHCP OFF, ON
IP ADDRESS 192.168.0.10
SUBNET MASK 255.255.255.0
GATEWAY 192.168.0.1
AUTO DNS OFF, ON
DNS CONFIGURATION
RECONNECT
PROJECTOR NAME PROJECTOR NAME PH1202HL Series
DOMAIN HOST NAME
necpj
DOMAIN NAME
ALERT MAIL ALERT MAIL
OFF, ON
HOST NAME
DOMAIN NAME
SENDER'S ADDRESS
SMTP SERVER NAME
RECIPIENT'S ADDRESS 1
RECIPIENT'S ADDRESS 2
RECIPIENT'S ADDRESS 3
TEST MAIL
NETWORK SERVICE HTTP 
SERVER
NEW PASSWORD
CONFIRM PASSWORD
PJLink NEW PASSWORD
CONFIRM PASSWORD
AMX 
BEACON OFF, ON
CRESTRON
ROOMVIEW
OFF, ON
CRESTRON 
CONTROL (ENABLE, 
CONTROLLER IP 
ADDRESS, IP ID)
SOURCE 
OPTIONS AUTO ADJUST
NORMALOFF, NORMAL, FINE
COLOR SYSTEM BNC(VIDEO)
AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
BNC(Y/C) AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
DEFAULT INPUT SELECT LASTLAST, AUTO, HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), 
COMPUTER, HDBaseT, SLOT
SEAMLESS SWITCHING OFFOFF, ON
CLOSED CAPTION OFFOFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, 
TEXT3, TEXT4
BACKGROUND BLUEBLUE, BLACK, LOGO
POWER 
OPTIONS STANDBY MODE
NORMALNORMAL, HDBaseT STANDBY
DIRECT POWER ON OFFOFF, ON
AUTO POWER ON SELECT OFFOFF, HDMI, DisplayPort, COMPUTER, HDBaseT, SLOT
AUTO POWER OFF 1:00OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00
OFF TIMER OFFOFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
SLOT POWER PROJECTOR ON
ONOFF, ON
PROJECTOR STANDBY ENABLEDISABLE, ENABLE
RESET CURRENT SIGNAL
ALL DATA
ALL DATA (INCLUDING ENTRY LIST)
CLEAR FILTER HOURS
5. Using On-Screen Menu  
						

							75
Menu ItemDefaultOptions
INFO. USAGE TIME
LIGHT HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE(1) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO.
SOURCE(2) SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D FORMAT
SOURCE(3) INPUT TERMINAL
RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE
SYNC POLARITY
SCAN TYPE
SOURCE NAME
ENTRY NO.
SOURCE(4) SIGNAL TYPE
VIDEO TYPE
BIT DEPTH
VIDEO LEVEL
LINK RATE
LINK LANE
3D FORMAT
WIRED LAN IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
VERSION(1) FIRMWARE
D ATA
SUB-CPU
VERSION(2) FIRMWARE3
OTHERS DATE TIME
PROJECTOR NAME
MODEL NO.
SERIAL NUMBER
CONTROL ID (when [CONTROL ID] is set)
CONDITIONS INTAKE TEMPERATURE
EXHAUST TEMPERATURE
ATMOSPHERIC PRESSURE
HDBaseT SIGNAL QUALITY
OPERATION MODE
LINK STATUS
HDMI STATUS
5. Using On-Screen Menu