NEC Projector Ph1000u User Manual

87
4. Using the Viewer
6.	 Exit	the	setting.
 Press the ▼	button	to	select	[OK]	and	press	the	ENTER	button.
	 This	will	close	the	[SHARED	FOLDER]	screen.
•	 If	an	error	message	appear,	your	settings	are	not	correct. 	Try	again. 

88
4. Using the Viewer
Disconnecting the shared folder from the projector
•	 Disable	the	number	of	a	shared	folder	you	wish	to	disconnect
 Press the ▼	button	to	select	[ENABLE]	and	press	the	ENTER	button	to	clear	it.
NOTE:
•	 When	a	PowerPoint	file	or	PDF	file	is	displayed,	do	not	disconnect	your	LAN	cable.	If	doing	so,	the	Viewer	will	not	work.
TIP:	
•	 Connecting	settings	for	Shared	folder	
	 Settings	of	up	to	four	folders	can	be	saved.
	 Restarting	the	projector	will	display	setting-saved	shared...

89
4. Using the Viewer
❺ Projecting data from media server
LAN
Media server Media server Wireless	LAN
Media server
Projector
Preparation
For	projector:	Connect	the	projector	to	the	network.
For	computer: 	Prepare	 image	files	or	movie	 files	to	be	 projected,	 and	set	up	“Media	 Sharing” 	in	 Windows	 Media	Player	
11	or	Windows	Media	Player	12.
NOTE: 
•	 Both	 the	projector	 and	the	media	 server	 must	be	on	 the	 same	 subnet.	 Connecting	 to	the	 media	 server	 beyond	 the	subnet	 is	not	
possible.
•...

90
4. Using the Viewer
3.	 Select	“Share	my	media” 	check	box,	and	then	select	OK. 	
	 A	list	of	accessible	devices	will	be	displayed.
4.	 Select	“PH1000	Series” 	and	then	“Allow”.
	 A	check	mark	will	be	added	to	the	 “PH1000	Series”	icon.
•	 The	“PH1000	Series” 	is	a	projector	name	specified	in	[NETWORK	SETTINGS]. 	
5.	 Select	“OK”.
	 This	will	make	pictures	and	video	in	 “Library”	available	from	the	projector. 

91
4. Using the Viewer
Setting up “Media Sharing” in Windows Media Player 12
1.	 Start	Windows	Media	Player	12.
2.	 Select	 “Stream”, 	and	then	select	 “Automatically	allow	devices	to	play	my	media”.
	 The	“Allow	All	Media	Devices” 	windows	will	be	displayed.
3.	 Select	“Automatically	allow	all	computers	and	media	devices”.
	 Graphics	and	movie	files	in	 “Library”	can	be	used	from	the	projector. 

92
4. Using the Viewer
Connecting the projector to the media server
Press	the	VIEWER	button	on	the	remote	control.
The	VIEWER	will	start.
•	 Another	 way	to	start	 the	VIEWER	 is	to	 press	 the	SOURCE	 button	a	few	 times	 on	the	 projector	 cabinet.	(→	page	
20)
•	 This	 will	start	 searching	 for	a	computer	 with	“media	 sharing” 	enabled	 in	the	 network	 and	add	it	to	 the	 “Media	 server”	
of	the	thumbnail	screen.
	 Another	 way	to	do	 this	 is	to	 point	 the	cursor	 to	“Media	 server”	and	 select...

93
4. Using the Viewer
Disconnecting the projector from the media server
1.	 Display	the	OPTIONS	menu.
 Press the ▼	button	to	select	the	[OPTIONS]	icon	and	select	the	ENTER	button.
2.	 Display	the	MEDIA	SERVER	setting	screen.
 Press the ▼	button	to	select	the	MEDIA	SERVER	icon	and	press	the	ENTER	button.
3.	 Disable	the	connection.
	 Press	the	ENTER	button	to	clear	the	checkmark	to	disable	the	connection.
 Press the ▼	button	to	select	[OK]	and	press	the	ENTER	button	to	close	the	MEDIA	SERVER	setting...

94
4. Using the Viewer
❻ Restrictions on displaying files
The	Viewer	allows	you	to	give	a	simplified	display	of	a	PowerPoint	file	or	PDF	file.
Due	 to	simplified	 display,	however,	 actual	display	 may	be	different	 from	the	one	 on	your	 computer	 application	 pro-
gram.
Some restrictions on PowerPoint files
•	 Fonts	 will	be	automatically	 converted	to	the	 fonts	 installed	 in	the	 projector. 	Fonts	 can	vary	 in	size	 or	width,	 causing	
layout	corruption
	 Some	characters	or	fonts	may	not	be...

95
5. Using On-Screen Menu
1 Using the Menus
NOTE:	The	on-screen	menu	may	not	be	displayed	correctly	while	interlaced	motion	video	image	is	projected.
1.	 Press	the	MENU	button	on	the	remote	control	or	the	projector	cabinet	to	display	the	menu.
NOTE: The commands such as ENTER,	EXIT,	, 	in	the	bottom	show	available	buttons	for	your	operation.
2.	 Press	the		buttons	on	the	remote	control	or	the	projector	cabinet	to	display	the	submenu.
3.	 Press	the	ENTER	 button	on	the	 remote	 control	 or	the...

96
5. Using On-Screen Menu
 Menu Elements
Slide	bar
Solid	triangle
Menu mode
Tab
Radio	button
ECO	mode	symbol
Wireless	symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight �����������������������������Indicates the selected menu or item� 
Solid triangle  ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting on...