NEC Projector PA622U User Manual

							148
8. User Supportware
❷ Installing Software Program
Installation for Windows software
The	software	 programs	 except	PC	Control	 Utility	Pro	5	support	 Windows	 8,	Windows	 7,	Windows	 Vista,	and	Windows	
XP.
NOTE:
•	 To	 install	 or	uninstall	 each	software	 program,	 the	Windows	 user	account	 must	have	“Administrator”	 privilege	(Windows	 8,	Win-
dows	7,	Windows	Vista)	or	“Computer	Administrator”	privilege	(Windows	XP).
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.
•	 To	 run	Virtual	 Remote	 Tool	or	PC	 Control	 Utility	Pro	4	on	 Windows	 8,	Windows	 XP	Home	 Edition,	 and	Windows	 XP	Professional,	
“Microsoft	 .NET	Framework	 Version	2.0”	is	required.	 The	Microsoft	 .NET	Framework	 Version	2.0,	3.0	or	3.5	 is	available	 from	
Microsoft’s	web	page.	Download	and	install	it	on	your	computer.
 
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
	 The	menu	window	will	be	displayed.
TIP:
If the menu window will not be displayed, try the following procedure.
For	Windows	7
1.	 Click	 “start”	on	Windows.
2.	 Click	 “All	Programs” 	→ “Accessories” → “Run”.
3.	 Type	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
	 The	menu	window	will	be	displayed. 
						

							149
8. User Supportware
2	 Click	a	software	program	you	wish	to	install	on	the	menu	window.
	 The	installation	will	start.
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
TIP:
Uninstalling a Software Program
Preparation:
Exit	the	software	 program	before	uninstalling. 	To	 uninstall	 the	software	 program,	 the	Windows	 user	account	 must	
have	“Administrator” 	privilege	 (Windows	 8,	Windows	 7,	and	 Windows	 Vista)	or	“Computer	 Administrator” 	privilege	
(Windows	XP).
•	For	 Windows	8/Windows	7/Windows	 Vista
1	 Click	“Start”	and	then	 “Control	Panel”.
	 The	Control	Panel	window	will	be	displayed.
2	 Click	“Uninstall	a	program” 	under	“Programs”
	 The	“Programs	and	Features” 	window	will	be	displayed.
3 Select the software program and click it.
4	 Click	 “Uninstall/Change” 	or	“Uninstall”.
	 •	 When	the	 “User	Account	Control” 	windows	is	displayed,	click	 “Continue”.
	 Follow	the	instructions	on	the	screens	to	complete	the	uninstallation.
•	For	Windows	XP
1	 Click	 “Start”	and	then	 “Control	Panel”.
	 The	Control	Panel	window	will	be	displayed.
2 Double-click “Add / Remove Programs”.
	 The	Add	/	Remove	Programs	window	will	be	displayed.
3	 Click	the	software	program	from	the	list	and	then	click	 “Remove”.
	 Follow	the	instructions	on	the	screens	to	complete	the	uninstallation. 
						

							150
8. User Supportware
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer.
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.	
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.	
	 The	CD-ROM	window	will	be	displayed.
3. Double-click the “Mac OS X” folder.
4.	 Double-click	 “PC	Control	Utility.mpkg”. 	
	 The	installer	will	start.
5.	 Click	“Next”.	
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
6.	 Read	“END	USER	LICENSE	AGREEMENT” 	and	click	“Next”.	
	 The	confirmation	window	will	be	displayed
7.	 Click	 “I	accept	the	terms	in	the	license	agreement”. 	
	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
TIP:
•	Uninstalling	a	software	program
1.	 Put	the	“PC	Control	Utility	Pro	5” 	folder	to	the	Trash	icon.
2.	 Put	the	configuration	file	of	PC	Control	Utility	Pro	5	to	the	 Trash	icon.
•	 The	configuration	 file	of	PC	 Control	 Utility	Pro	5	is	 located	 in	“/Users//Application	 Data/NEC	
Projector	User	Supportware/PC	Control	Utility	Pro	5”.
  
						

							151
8. User Supportware
❸ Operating the Projector Via the LAN (Virtual Remote Tool)
This	will	help	 you	perform	 operations	 such	as	projector’s	 power	on	or	off	 and	 signal	 selection	 via	a	LAN	 connection. 	It	
is	 also	 used	 to	send	 an	image	 to	the	 projector	 and	register	 it	as	 the	 logo	 data	 of	the	 projector. 	After	 registering	 it,	you	
can	lock	the	logo	to	prevent	it	from	changing.
Control Functions
Power	 On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 Logo	transfer	 to	the	 projector,	 and	remote	
control	operation	on	your	PC.
Virtual	Remote	screen
Remote	Control	 WindowToolbar
This	section	provides	an	outline	of	preparation	for	use	of	 Virtual	Remote	Tool.
For	information	on	how	to	use	 Virtual	Remote	Tool,	see	Help	of	 Virtual	Remote	Tool.	(→	page	153)
NOTE:
•	 Logo	data	(graphics)	that	can	be	sent	to	the	projector	with	Virtual	Remote	Tool	has	the	following	restrictions:
	 (Only	via	serial	or	LAN	connection)
*	 File	size:	Within	256	kilobytes
*	 Image	size:	Within	the	resolution	of	the	projector
*	 File	format:	PNG	(Full	color)
•	 Logo	data	(image)	sent	using	the	Virtual	Remote	Tool	will	be	displayed	in	the	center	with	the	surrounding	area	in	black.
•	 To	 put	the	default	 “NEC	logo”	 back	in	the	 background	 logo,	you	need	 to	register	 it	as	 the	 background	 logo	by	using	 the	image	
file	 (PA622U/NP-PA522U:	 \Logo\necpj_bbwux.png,	 PA672W/PA572W:	\Logo\necpj_bbwx.png,	 PA722X/NP-PA622X:	\Logo\
necpj_bb_x.png)	included	on	the	supplied	NEC	Projector	CD-ROM. 
						

							152
8. User Supportware
Connect the projector to a LAN.
Connect	the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	137)	 and	 “9.	
Controlling	the	Projector	by	Using	an	HTTP	Browser” 	(→	page	42)
Start Virtual Remote Tool
Start using the shortcut icon
•	 Double-click	the	shortcut	icon	 on the Windows Desktop.
Start from the Start menu
•	 Click	[Start]	→	[All	 Programs]	 or	[Programs]	→	[NEC	 Projector	 User	Supportware]	→	[Virtual	 Remote	 Tool]	
→	[Virtual	Remote	 Tool].
	 When	Virtual	Remote	 Tool	starts	for	the	first	time,	 “Easy	Setup”	window	will	be	displayed.
	 Follow	the	instructions	on	the	screens
	 When	“Easy	Setup” 	is	completed,	the	 Virtual	Remote	Tool	screen	will	be	displayed.
NOTE:
•	 When	[NORMAL]	is	selected	for	[STANDBY	MODE]	from	the	menu,	the	projector	cannot	be	turned	on	via	network	connection.
TIP:
•	 The	Virtual	Remote	Tool	screen	(or	Toolbar)	can	be	displayed	without	displaying	“Easy	Setup”	window.
	 To	do	so,	click	to	place	a	check	mark	for	“		Do	not	use	Easy	Setup	next	time”	on	the	screen	at	Step	6	in	“Easy	Setup”. 
						

							153
8. User Supportware
Exiting	Virtual	Remote	 Tool
1	 Click	the	Virtual	Remote	 Tool	icon	 on the Taskbar.
	 The	pop-up	menu	will	be	displayed.
2	 Click	“Exit”.
	 The	Virtual	Remote	 Tool	will	be	closed.
Viewing	the	help	file	of	 Virtual	Remote	Tool
•	Displaying	the	help	file	using	the	taskbar
1	 Click	the	Virtual	Remote	 Tool	icon		on	the	taskbar	when	 Virtual	Remote	Tool	is	running.
	 The	pop-up	menu	will	be	displayed.
2.	 Click	“Help”.
	 The	Help	screen	will	be	displayed.
•	Displaying	the	help	file	using	the	Start	Menu.
1.	 Click	“Start”.	“All	 programs” 	or	 “Programs”. 	“NEC	 Projector	 User	Supportware”. 	“Virtual	 Remote	Tool”.	and	
then	 “Virtual	Remote	 Tool	Help”	in	this	order.
	 The	Help	screen	will	be	displayed. 
						

							154
8. User Supportware
❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/
Pro 5)
Using	 the	utility	 software	 “PC	Control	 Utility	Pro	4”	or	 “PC	 Control	 Utility	Pro	5”	included	 on	the	 companion	 NEC	Pro-
jector	CD-ROM,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
PC	Control	Utility	Pro	4	is	a	program	compatible	with	 Windows.	(→	this	page)
PC	Control	Utility	Pro	5	is	a	program	compatible	with	Mac	OS. 	(→	page	157)
Control Functions
Power	On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	 event	
schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4/Pro	 5.	For	 information	 on	how	 to	use	
PC	Control	Utility	Pro	4/Pro	5,	see	Help	of	PC	Control	Utility	Pro	4/Pro	5. 	(→	page	156,	157)
Step	1:	Install	PC	Control	Utility	Pro	4/Pro	5	on	the	computer.
Step	2:	Connect	the	projector	to	a	LAN.
Step	3:	Start	PC	Control	Utility	Pro	4/Pro	5.
•	 To	run	PC	Control	 Utility	Pro	4	on	 Windows	 8,	Windows	 XP	Home	 Edition	 and	Windows	 XP	Professional,	 “Microsoft	
.NET	Framework” 	is	 required. 	The	 Microsoft	 .NET	Framework	 Version	2.0,	3.0	or	3.5	 is	available	 from	Microsoft’s	
web	page. 	Download	and	install	the	it	on	your	computer. 	
TIP:
•	 PC	Control	Utility	Pro	4	can	be	used	with	a	serial	connection.
Using on Windows
Step 1: Install PC Control Utility Pro 4 on the computer
NOTE:
•	 To	install	 or	uninstall	 the	program,	 the	Windows	 user	account	 must	have	[Administrator]	 privilege	(Windows	 8,	Windows	 7,	
Windows	Vista	and	Windows	XP)
•	 Exit	all	running	programs	before	installation.	If	another	program	is	running,	the	installation	may	not	be	completed.
1	 Insert	the	accompanying	NEC	Projector	CD-ROM	into	your	CD-ROM	drive.
	 The	menu	window	will	be	displayed. 
						

							155
8. User Supportware
TIP:
If the menu window will not be displayed, try the following procedure.
For	Windows	7:
1.	 Click	“start”	on	Windows.
2.	 Click	 “All	Programs” 	→ “Accessories” → “Run”.
3.	 Type	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
	 the	menu	window	will	be	displayed.
2	 Click	“PC	Control	Utility	Pro	4” 	on	the	menu	window.
	 The	installation	will	start.
	 When	the	installation	is	complete,	the	 Welcome	window	will	be	displayed.
3	 Click	“Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
	 Read	“END	USER	LICENSE	AGREEMENT” 	carefully.
4 If you agree, click “I accept the terms in the license agreement” and then click “Next”.
•	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
•	 When	the	installation	is	complete,	you	will	return	to	the	menu	window.
TIP:
•	Uninstalling	PC	Control	Utility	Pro	4
To	uninstall	PC	Control	Utility	Pro	4,	do	the	same	procedures	stated	as	in	“Uninstalling	a	Software	Program”.	(→ page 149) 
						

							156
8. User Supportware
Step 2: Connect the projector to a LAN.
Connect	the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	137)	 and	 “9.	
Controlling	the	Projector	by	Using	an	HTTP	Browser” 	(→	page	42)
Step 3: Start PC Control Utility Pro 4
Click	“Start” 	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4”.
NOTE: 
•	 For	 the	Schedule	 function	of	the	 PC	Control	 utility	Pro	4	to	 work,	 you	must	 have	your	computer	 running	and	not	in	standby/
sleep	 mode.	 Select	“Power	 Options”	 from	the	“Control	 Panel”	in	Windows	 and	disable	 its	standby/sleep	 mode	before	 running	 the	
scheduler.
[Example]	For	Windows	7:
Select	“Control	 Panel”	→	“System	 and	Security”	→	“Power	 Options”	→	“Change	 when	the	computer	 sleeps”	→	“Put	 the	computer	
to	sleep”	→	“Never”.	
NOTE: 
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN)	
connection.
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	4
•	 Displaying	the	Help	file	of	PC	Control	Utility	Pro	4	while	it	is	running.
	 Click	 “Help	(H)” 	→	“Help	(H)	…” 	of	window	of	PC	Control	Utility	Pro	4	in	this	order.
	 The	pop-up	menu	will	be	displayed.
•	 Displaying	the	help	file	using	the	Start	Menu.
	 Click	“Start”	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control	Utility	Pro	4	Help”.
	 The	Help	screen	will	be	displayed. 
						

							157
8. User Supportware
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.
	 The	CD-ROM	window	will	be	displayed.
3. Double-click the “Mac OS X” folder.
4.	 Double-click	 “PC	Control	Utility.mpkg”.
	 The	installer	will	start.
5.	 Click	“Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
6.	 Read	“END	USER	LICENSE	AGREEMENT” 	and	click	“Next”.
	 The	confirmation	window	will	be	displayed
7.	 Click	“I	accept	the	terms	in	the	license	agreement”.
	 Follow	the	instructions	on	the	installer	screens	to	complete	the	installation.
Step 2: Connect the projector to a LAN
Connect	 the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	137)	 and	 “❾ 
Controlling	the	Projector	by	Using	an	HTTP	Browser” 	(→	page	42)
Step 3: Start PC Control Utility Pro 5
1. Open your Applications folder in Mac OS.
2.	 Click	the	 “PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5” 	icon.
	 PC	Control	Utility	Pro	5	will	start.
NOTE: 
•	 For	the	Schedule	 function	of	the	 PC	Control	 utility	Pro	5	to	 work,	 you	must	 have	your	computer	 running	and	not	in	sleep	 mode.	
Select	“Energy	Saver”	from	the	“System	Preferences”	in	Mac	and	disable	its	sleep	mode	before	running	the	scheduler.
•	 When	 [NORMAL]	 is	selected	 for	[STANDBY	 MODE]	from	the	menu,	 the	projector	 cannot	be	turned	 on	via	 the	 network	 (wired	LAN)	
connection.
 
TIP:
Viewing	the	Help	of	PC	Control	Utility	Pro	5
•	Displaying	the	Help	file	of	PC	Control	Utility	Pro	5	while	it	is	running. 	
•	 From	the	menu	bar,	click	“Help” 	→	“Help” 	in	this	order. 	
	 The	Help	screen	will	be	displayed.
•	Displaying	the	Help	using	the	Dock	
1. Open “Application Folder” in Mac OS.
2.	 Click	the	 “PC	Control	Utility	Pro	5” 	folder.
3.	 Click	the	“PC	Control	Utility	Pro	5	Help” 	icon.
	 The	Help	screen	will	be	displayed.