NEC Projector PA571W User Manual
Here you can view all the pages of manual NEC Projector PA571W User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
99
5. Using On-Screen Menu
[VIDEO LEVEL]
This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external
device are connected.
AUTO ���������������������The video level is switched automatically based on the information from \
the device outputting the signal�
Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL”
or “ENHANCED” from the menu and view with the optimum setting�
NORMAL...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-110.png "Page 111
99
5. Using On-Screen Menu
[VIDEO LEVEL]
This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external
device are connected.
AUTO ���������������������The video level is switched automatically based on the information from \
the device outputting the signal�
Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL”
or “ENHANCED” from the menu and view with the optimum setting�
NORMAL...")
99 5. Using On-Screen Menu [VIDEO LEVEL] This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external device are connected. AUTO ���������������������The video level is switched automatically based on the information from \ the device outputting the signal� Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL” or “ENHANCED” from the menu and view with the optimum setting� NORMAL...
Page 112
![Page 112
100
5. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Correcting Vertical Keystone Distortion Manually [KEYSTONE]
You can correct vertical distortion manually. (→ page 22)
TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 32)
NOTE: The [CORNERSTONE]...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-111.png "Page 112
100
5. Using On-Screen Menu
Menu Descriptions & Functions [SETUP]
[BASIC]
Correcting Vertical Keystone Distortion Manually [KEYSTONE]
You can correct vertical distortion manually. (→ page 22)
TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 32)
NOTE: The [CORNERSTONE]...")
100 5. Using On-Screen Menu Menu Descriptions & Functions [SETUP] [BASIC] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 22) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment. Selecting Cornerstone Mode [CORNERSTONE] This option allows you to correct trapezoidal distortion. Selecting this item will display the Cornerstone adjustment screen. (→ page 32) NOTE: The [CORNERSTONE]...
Page 113
![Page 113
101
5. Using On-Screen Menu
SOURCE:
This option allows you to select a sub picture signal.
The options are: OFF, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen.
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
NOTE: Selecting [WHITEBOARD] reduces lamp brightness.
Setting Eco Mode [ECO MODE]
The ECO MODE increases lamp life, while...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-112.png "Page 113
101
5. Using On-Screen Menu
SOURCE:
This option allows you to select a sub picture signal.
The options are: OFF, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen.
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
NOTE: Selecting [WHITEBOARD] reduces lamp brightness.
Setting Eco Mode [ECO MODE]
The ECO MODE increases lamp life, while...")
101 5. Using On-Screen Menu SOURCE: This option allows you to select a sub picture signal. The options are: OFF, VIDEO and S-VIDEO. Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen. Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] The ECO MODE increases lamp life, while...
Page 114
![Page 114
102
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display-
Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen.
Turning messages on and off [MESSAGE DISPLAY]
This option selects whether or not to display projector messages at the...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-113.png "Page 114
102
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display-
Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen.
Turning messages on and off [MESSAGE DISPLAY]
This option selects whether or not to display projector messages at the...")
102 5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display- Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen. Turning messages on and off [MESSAGE DISPLAY] This option selects whether or not to display projector messages at the...
Page 115
![Page 115
103
5. Using On-Screen Menu
When [OFF] is selected for [ECO MODE]
Pressing the ENTER button will display the [ECO MODE] screen. (→ page 28)
To close the message, press the EXIT button.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-114.png "Page 115
103
5. Using On-Screen Menu
When [OFF] is selected for [ECO MODE]
Pressing the ENTER button will display the [ECO MODE] screen. (→ page 28)
To close the message, press the EXIT button.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a...")
103 5. Using On-Screen Menu When [OFF] is selected for [ECO MODE] Pressing the ENTER button will display the [ECO MODE] screen. (→ page 28) To close the message, press the EXIT button. Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac- tory preset. Selecting a...
Page 116
![Page 116
104
5. Using On-Screen Menu
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Selecting Aspect Ratio and Position for Screen [SCREEN]
Screen typeSets the aspect ratio of the projection screen.
4:3 screenFor a screen with a 4:3 aspect ratio
16:9 screen For a screen with a 16:9 aspect ratio
16:10 screen For a screen with a 16:10 aspect
ratio
Display positionWhen the screen type is set to 16:9 or 16:10, adjusts the
vertical position of the display range.
Downward
Upward
NOTE:
• After...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-115.png "Page 116
104
5. Using On-Screen Menu
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT
Selecting Aspect Ratio and Position for Screen [SCREEN]
Screen typeSets the aspect ratio of the projection screen.
4:3 screenFor a screen with a 4:3 aspect ratio
16:9 screen For a screen with a 16:9 aspect ratio
16:10 screen For a screen with a 16:10 aspect
ratio
Display positionWhen the screen type is set to 16:9 or 16:10, adjusts the
vertical position of the display range.
Downward
Upward
NOTE:
• After...")
104 5. Using On-Screen Menu DESKTOP FRONTCEILING REAR DESKTOP REARCEILING FRONT Selecting Aspect Ratio and Position for Screen [SCREEN] Screen typeSets the aspect ratio of the projection screen. 4:3 screenFor a screen with a 4:3 aspect ratio 16:9 screen For a screen with a 16:9 aspect ratio 16:10 screen For a screen with a 16:10 aspect ratio Display positionWhen the screen type is set to 16:9 or 16:10, adjusts the vertical position of the display range. Downward Upward NOTE: • After...
Page 117
![Page 117
105
5. Using On-Screen Menu
ON: Turns on this function to make the screen darker� The [BRIGHTNESS] and the [CONTRAST] can be
adjusted�
CONTRAST ������������Adjusts the bright part of the picture�
BRIGHTNESS ���������Adjusts the dark part of the picture�
Adjusting
1. Prepare black and white images so that the images can be displayed on the computer screen.
2. Display the black image on the computer screen, and project the image from the projector\
.
3. Select [MULTI-SCREEN COMP.] →...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-116.png "Page 117
105
5. Using On-Screen Menu
ON: Turns on this function to make the screen darker� The [BRIGHTNESS] and the [CONTRAST] can be
adjusted�
CONTRAST ������������Adjusts the bright part of the picture�
BRIGHTNESS ���������Adjusts the dark part of the picture�
Adjusting
1. Prepare black and white images so that the images can be displayed on the computer screen.
2. Display the black image on the computer screen, and project the image from the projector\
.
3. Select [MULTI-SCREEN COMP.] →...")
105 5. Using On-Screen Menu ON: Turns on this function to make the screen darker� The [BRIGHTNESS] and the [CONTRAST] can be adjusted� CONTRAST ������������Adjusts the bright part of the picture� BRIGHTNESS ���������Adjusts the dark part of the picture� Adjusting 1. Prepare black and white images so that the images can be displayed on the computer screen. 2. Display the black image on the computer screen, and project the image from the projector\ . 3. Select [MULTI-SCREEN COMP.] →...
Page 118
![Page 118
106
5. Using On-Screen Menu
[INSTALLATION(2)]
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control functions.
• When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change
the setting to [OFF].
TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-117.png "Page 118
106
5. Using On-Screen Menu
[INSTALLATION(2)]
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• This CONTROL PANEL LOCK does not affect the remote control functions.
• When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change
the setting to [OFF].
TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right...")
106 5. Using On-Screen Menu [INSTALLATION(2)] Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions. • When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change the setting to [OFF]. TIP: When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right...
Page 119
![Page 119
107
5. Using On-Screen Menu
NOTE:
• When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support
the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.)
• Your setting will not be affected even when [RESET] is done from the menu.
• Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control
ID.
Assigning or Changing the...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-118.png "Page 119
107
5. Using On-Screen Menu
NOTE:
• When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support
the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.)
• Your setting will not be affected even when [RESET] is done from the menu.
• Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control
ID.
Assigning or Changing the...")
107 5. Using On-Screen Menu NOTE: • When [ON] is selected for [CONTROL ID], the projector cannot be operated by using the remote control that does not support the CONTROL ID function. (In this case the buttons on the projector cabinet can be used.) • Your setting will not be affected even when [RESET] is done from the menu. • Pressing and holding the ENTER button on the projector cabinet for 10 seconds will display the menu for canceling the Control ID. Assigning or Changing the...
Page 120
![Page 120
108
5. Using On-Screen Menu
[OPTIONS(1)]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal�
NORMAL ����������������Default setting� The computer signal will be automatically...](http://img.usermanuals.tech/thumb/54/99625/w300_projector_manual_8416_d-119.png "Page 120
108
5. Using On-Screen Menu
[OPTIONS(1)]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].
OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal�
NORMAL ����������������Default setting� The computer signal will be automatically...")
108 5. Using On-Screen Menu [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal� NORMAL ����������������Default setting� The computer signal will be automatically...