NEC Projector Pa550w User Manual

189
8. User Supportware
•	Operating	the	projector	(connecting	computer)
1	 Connect	a	USB	mouse	that	is	commercially	available	to	the	projector.
USB
2	 Turn	on	the	power	to	the	projector.
 Set the LAN setting of the projector in advance.
3	 Press	the	SOURCE	button	on	the	projector	unit.
 The Source list will be displayed.
 In case of the remote control, press the NETWORK button.
 The “network menu” screen will be displayed, proceed to step 5.
4 Press the /	buttons	to	select	[NETWORK], 	and	then	press...

190
8. User Supportware
5	 Click	[DESKTOP	CONTROL	UTILITY].
 The “DESKTOP CONTROL UTILITY menu” screen will be displayed.
6	 Click	 “ENTRY”.
 A password input screen will be displayed.
7	 Input	the	password	you	have	written	down	in	step	4	of	 “Operation	on	computer”.
•	 Click	the	[BS]	 button	 on	the	 right	 side	of	the	 [PASSWORD]	 field	to	delete	 the	character	 to	the	 left	of	the	 character	
insertion point.
8	 After	inputting	the	password, 	click	the		button	on	the	right	side	of	the	[PASSWORD]...

191
8. User Supportware
10	Click	the	computer	at	the	connection	destination	and	then	[OK].
 The desktop screen of the computer at the connection destination will be\
 displayed.
•	Operating	the	projector	(manipulating	desktop	screen)
The	 displayed	 desktop	screen	can	be	manipulated	 by	using	 the	USB	 mouse	 connected	 to	the	 projector. 	If	 the	 EXIT	
button	 of	the	 projector	 or	remote	 control	is	pressed	 while	the	desktop	 screen	is	displayed,	 an	auxiliary	 operation	 bar	
is	displayed	at	the...

192
8. User Supportware

  (cut-off icon) �������Disconnects communication with the computer �
  (Shift icon) ����������When the highlight is moved to this icon and the ENTER button is pressed, shift lock status is set� 
The  shift  lock  is  canceled  if  the  highlight  is  moved  to  this  icon  and  the  ENTER  button  is  pressed 
again�
  (Ctrl icon) ������������When the highlight is moved to this icon and the ENTER button is pressed, control lock status is set� 
The control lock is canceled if the...

193
8. User Supportware
•	Operating	the	projector	(exiting	Desktop	Control	Utility	1.0)
1	 Click	the	projector	icon	[]	on	the	taskbar	while	the	desktop	screen	is	displayed.
2	 Click	[Exit].
 Desktop Control Utility 1.0 will be terminated.
3	 Press	the	EXIT	button	on	the	projector	unit	or	on	the	remote	control.
 The “network menu” screen will be displayed.
4	 Press	the	MENU	button	on	the	projector	unit	or	on	the	remote	control.
 The on-screen menu will be displayed.
5	 Select	an	input	source	other	than...

194
8. User Supportware
 Controlling the Projector over a LAN (PC Control Utility Pro 4)
Using	the	utility	software	“PC	Control	Utility	Pro	4”,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
Control Functions
Power	On/Off,	 signal	selection,	 picture	freeze,	 picture	mute,	audio	mute,	 adjusting,	 error	message	 notification,	 event	
schedule.
Screen	of	PC	Control	Utility	Pro	4
This	section	 provides	 an	outline	 of	preparation	 for	use	 of	PC	 Control	 Utility	Pro	4.	For	 information	 on...

195
8. User Supportware
 Converting PowerPoint files to Slides (Viewer PPT Converter 
3.0)
Using	 Viewer	 PPT	Converter	 3.0	allows	 you	to	convert	 PowerPoint	 files	into	JPEG	 files.	Converted	 JPEG	files	and	
Index	 files	(.idx)	 can	be	saved	 to	a	USB	 memory. 	When	 the	USB	 memory	 inserted	into	the	projector,	 these	JPEG	 files	
and	Index	files	(.idx)	can	be	displayed	with	the	viewer	function	of	the	projector	without	connecting	a	computer.
NOTE:
When	Viewer	 PPT	Converter	 3.0	has	 been...

196
8. User Supportware
5.	 Select	the	USB	memory	drive	for	“Card	Drive”	and	type	in	“Index	name”.
 Index name must be eight alphanumeric characters or less. 2-byte character and file with a long filename cannot 
be used.
6.	 Click	 “Export”.
 A confirmation message will be displayed.
7.	 Click	 “OK”.
 Exporting a file will start.
8.	 Click	 “OK”.
9.	 Click	“Exit”.
 Viewer PPT Converter 3.0 will exit.
10. 	Remove	the	USB	memory	from	the	computer.
NOTE:
•	 Before	 removing	 the	USB	 memory	 from	the	USB...

197
8. User Supportware
 Projecting Your Mac’s Screen Image from the Projector over 
a LAN (Image Express Utility 2 for Mac)
Using	Image	 Express	 Utility	2	for	 Mac	 contained	 allows	you	to	send	 the	Mac’s	 screen	 image	to	the	 projector	 over	a	
network	(wired	or	wireless	LAN).
Image	Express	Utility	2	for	Mac	runs	on	Mac	OS	X	10.2.8	or	later.
It	runs	on	both	Mac	OS	X	(PowerPC)	and	Mac	OS	X	(Intel).
Hereafter,	 “Image	Express	Utility	2	for	Mac” 	is	abbreviated	as	“Image	Express	Utility	2”.
What you...

198
8. User Supportware
Using Image Express Utility 2
Connecting	to	a	projector
1	 Confirm	that	the	projector	has	been	turned	on.
2	 Click	the	AirPort	status	(		)	on	the	Macintosh	menu	bar,	and	click	“Turn	AirPort	On”.
 The AirPort status is changed to “  ” or “  ”.
•	 AirPort	status	types	and	meanings
 ...AirPort : Off
 ...AirPort : On ( in infrastructure connection )
 ...AirPort : On ( in adhoc connection )
REFERENCE:
When	the	AirPort	status	(		/		/		)	is	not	displayed	on	the	menu	bar:
1	 Click	Apple...