NEC Projector PA521U User Manual
Have a look at the manual NEC Projector PA521U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
74
4. Using the Viewer
6. Exit the setting.
Press the ▼ button to select [OK] and press the ENTER button.
This will close the [SHARED FOLDER] screen.
• If an error message appear, your settings are not correct. Try again.](http://img.usermanuals.tech/thumb/54/99626/w64_projector_manual_8417_d-85.png "Page 86
74
4. Using the Viewer
6. Exit the setting.
Press the ▼ button to select [OK] and press the ENTER button.
This will close the [SHARED FOLDER] screen.
• If an error message appear, your settings are not correct. Try again.")
![Page 87
75
4. Using the Viewer
Disconnecting the shared folder from the projector
• Disable the number of a shared folder you wish to disconnect
Press the ▼ button to select [ENABLE] and press the ENTER button to clear it.
NOTE:
• When a PowerPoint file or PDF file is displayed, do not disconnect your LAN cable. If doing so, the Viewer will not work.
TIP:
• Connecting settings for Shared folder
Settings of up to four folders can be saved.
Restarting the projector will display setting-saved shared...](http://img.usermanuals.tech/thumb/54/99626/w64_projector_manual_8417_d-86.png "Page 87
75
4. Using the Viewer
Disconnecting the shared folder from the projector
• Disable the number of a shared folder you wish to disconnect
Press the ▼ button to select [ENABLE] and press the ENTER button to clear it.
NOTE:
• When a PowerPoint file or PDF file is displayed, do not disconnect your LAN cable. If doing so, the Viewer will not work.
TIP:
• Connecting settings for Shared folder
Settings of up to four folders can be saved.
Restarting the projector will display setting-saved shared...")
![Page 89
77
4. Using the Viewer
3. Select “Share my media” check box, and then select OK.
A list of accessible devices will be displayed.
4. Select “PA600 Series” and then “Allow”.
A check mark will be added to the “PA600 Series” icon.
• The “PA600 Series” is a projector name specified in [NETWORK SETTINGS].
5. Select “OK”.
This will make pictures and video in “Library” available from the projector.](http://img.usermanuals.tech/thumb/54/99626/w64_projector_manual_8417_d-88.png "Page 89
77
4. Using the Viewer
3. Select “Share my media” check box, and then select OK.
A list of accessible devices will be displayed.
4. Select “PA600 Series” and then “Allow”.
A check mark will be added to the “PA600 Series” icon.
• The “PA600 Series” is a projector name specified in [NETWORK SETTINGS].
5. Select “OK”.
This will make pictures and video in “Library” available from the projector.")
![Page 92
80
4. Using the Viewer
Disconnecting the projector from the media server
1. Display the OPTIONS menu.
Press the ▼ button to select the [OPTIONS] icon and select the ENTER button.
2. Display the MEDIA SERVER setting screen.
Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button.
3. Disable the connection.
Press the ENTER button to clear the checkmark to disable the connection.
Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting screen.](http://img.usermanuals.tech/thumb/54/99626/w64_projector_manual_8417_d-91.png "Page 92
80
4. Using the Viewer
Disconnecting the projector from the media server
1. Display the OPTIONS menu.
Press the ▼ button to select the [OPTIONS] icon and select the ENTER button.
2. Display the MEDIA SERVER setting screen.
Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button.
3. Disable the connection.
Press the ENTER button to clear the checkmark to disable the connection.
Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting screen.")
79 4. Using the Viewer Connecting the projector to the media server Press the VIEWER button on the remote control. The VIEWER will start. • Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (→ page 16) • This will start searching for a computer with “media sharing” enabled in the network and add it to the “Media server” of the thumbnail screen. Another way to do this is to point the cursor to “Media server” and select [REFRESH] from the thumbnail menu and press the ENTER button. NOTE: • Up to four accessible media servers can be automatically searched and displayed. The fifth device or later cannot be displayed. (→ page 60)
80 4. Using the Viewer Disconnecting the projector from the media server 1. Display the OPTIONS menu. Press the ▼ button to select the [OPTIONS] icon and select the ENTER button. 2. Display the MEDIA SERVER setting screen. Press the ▼ button to select the MEDIA SERVER icon and press the ENTER button. 3. Disable the connection. Press the ENTER button to clear the checkmark to disable the connection. Press the ▼ button to select [OK] and press the ENTER button to close the MEDIA SERVER setting screen.
81 4. Using the Viewer ❻ Restrictions on displaying files The Viewer allows you to give a simplified display of a PowerPoint file or PDF file. Due to simplified display, however, actual display may be different from the one on your computer application pro- gram. Some restrictions on PowerPoint files • Fonts will be automatically converted to the fonts installed in the projector. Fonts can vary in size or width, causing layout corruption Some characters or fonts may not be displayed. • Some functions included in font are not supported. Example: There are some restrictions on animation, selection, or hyperlink. • It may take longer time to feed pages compared with a computer • In some cases Microsoft PowerPoint 97-2007 format files may not be displayed. Some restrictions on PDF files • Fonts not embedded at the time of PDF creation may not be displayed. • Some functions included in font are not supported. Example: There are some restrictions on annotations, selection, form, or color space. • It may take longer time to feed pages compared with a computer • In some cases Adobe Acrobat format files may not be displayed.
82 5. Using On-Screen Menu 1 Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, , in the bottom show available buttons for your operation. 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the buttons on the remote control or the projector cabinet to select the tab you want. 5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec- tor cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. 8. Press the MENU button to close the menu. To return to the previous menu, press the EXIT button.
83 5. Using On-Screen Menu Menu Elements Slide bar Solid triangle Menu mode Tab Radio button High Altitude symbol ECO mode symbol Wireless symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item� Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front� Radio button �����������������������Use this round button to select an option in a dialog box� Source ��������������������������������Indicates the currently selected source� Menu mode ������������������������Indicates the current menu mode: BASIC or ADVANCED� Off Timer remaining time ����Indicates the remaining countdown time when the [OFF TIMER] is preset� Slide bar �����������������������������Indicates settings or the direction of adjustment� ECO mode symbol ��������������Indicates [ECO MODE] is set� Key Lock symbol ����������������Indicates the [CONTROL PANEL LOCK] is enabled� Thermometer symbol ���������Indicates the [ECO MODE] is forcibly set to [ON] mode because the internal temperature is too high� High Altitude symbol ����������Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode� Wireless symbol �����������������Indicate the wireless LAN connection is enabled� Source Available buttons Thermometer symbol Key Lock symbol Off Timer remaining time Highlight
84 5. Using On-Screen Menu List of Menu Items Some menu items are not available depending on the input source. Menu ItemDefaultOptions SOURCE COMPUTER1*COMPUTER2*COMPUTER3(BNC)*HDMI*DisplayPort*VIDEO*S-VIDEO*VIEWER*NETWORK*ENTRY LISTTEST PATTERN ADJUST PICTURE MODESTANDARDSTANDARD, PROFESSIONAL PRESET*HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM. DETAIL SETTINGS GENERAL REFERENCE*HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM.GAMMA CORRECTION*1DYNAMIC, NATURAL, BLACK DETAIL SCREEN SIZE*2*LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*3*5000, 6500, 7800, 8500, 9300, 10500 DYNAMIC CONTRAST*OFF, ON WHITE BALANCECONTRAST R0CONTRAST G0CONTRAST B0BRIGHTNESS R0BRIGHTNESS G0BRIGHTNESS B0COLOR CORRECTIONRED0GREEN0BLUE0YELLOW0MAGENTA0CYAN0CONTRAST50BRIGHTNESS50SHARPNESS10COLOR50HUE0RESET IMAGE OPTIONS CLOCK*PHASE*HORIZONTAL*VERTICAL*OVERSCAN*AUTO, 0[%], 5[%], 10[%] ASPECT RATIO *(COMPUTER1/2/3) AUTO, 4:3, 5:4, 16:9, 15:9, 16:10, NATIVE *(COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3, LETTERBOX, WIDE SCREEN, ZOOM *(COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3 WINDOW, LETTERBOX, WIDE SCREEN, 4:3 FILLRESOLUTION*– VIDEO NOISE REDUCTION RANDOM NR*OFF, LOW, MEDIUM, HIGHMOSQUITO NROFFOFF, LOW, MEDIUM, HIGHBLOCK NROFFOFF, ONDEINTERLACEAUTOAUTO, VIDEO, FILM3D Y/C SEPARATIONONOFF, ONDETAIL ENHANCEMENT*SIGNAL TYPERGBRGB, COMPONENTVIDEO LEVELAUTOAUTO, NORMAL, ENHANCED * The asterisk (*) indicates that the default setting varies depending on the signal.*1 The [GAMMA CORRECTION] item is available when an item other than [DICOM SIM.] is selected for [REFERENCE].*2 The [SCREEN SIZE] item is available when [DICOM SIM.] is selected for [REFERENCE].*3 When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], the [COLOR TEMPERATURE] is not available. • Basic menu items are indicated by shaded area.
85 5. Using On-Screen Menu SETUP BASIC KEYSTONEHORIZONTAL0VERTICAL0CORNERSTONE PIP/PICTURE BY PICTURE PIP/PBP MODEPIPPIP, PICTURE BY PICTUREPIP POSITIONBOTTOM-RIGHTTOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHTPIP/PBP SOURCEOFFOFF, VIDEO, S-VIDEO WALL COLOROFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINKECO MODEOFFOFF, ON CLOSED CAPTIONOFFOFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4OFF TIMEROFFOFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 TOOLSADMINISTRATOR MODE, PROGRAM TIMER, TIME, MOUSE LANGUAGEENGLISH ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어ROMÂNĂ, HRVATSKA, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย MENU COLOR SELECTCOLORCOLOR, MONOCHROMESOURCE DISPLAYONOFF, ONMESSAGE DISPLAYONOFF, ONID DISPLAYONOFF, ONECO MESSAGEOFFOFF, ONDISPLAY TIMEAUTO 45 SECMANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SECBACKGROUNDBLUEBLUE, BLACK, LOGOFILTER MESSAGEOFFOFF, 100[H], 500[H], 1000[H], 2000[H] INSTALLATION (1) ORIENTATIONDESKTOP FRONTDESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT SCREENSCREEN TYPE4:3 SCREEN4:3 SCREEN, 16:9 SCREEN, 16:10 SCREENPOSITION0GEOMETRIC CORRECTIONOFFOFF, 1, 2, 3 MULTI-SCREEN COMP. MODEOFFOFF, ONCONTRAST0BRIGHTNESS0 REF. WHITE BALANCE CONTRAST R0CONTRAST G0CONTRAST B0BRIGHTNESS R0BRIGHTNESS G0BRIGHTNESS B0UNIFORMITY R0UNIFORMITY B0 STATIC CONVERGENCE HORIZONTAL R0HORIZONTAL G0HORIZONTAL B0VERTICAL R0VERTICAL R0VERTICAL B0 INSTALLATION (2) NETWORK SETTINGSWIRED LAN, WIRELESS LAN, WPS, NETWORK INFORMATION, PROJECTOR NAME, DOMAIN, ALERT MAIL, NETWORK SERVICECONTROL PANEL LOCKOFFOFF, ONSECURITYOFFOFF, ONCOMMUNICATION SPEED38400bps4800bps, 9600bps, 19200bps, 38400bps, 115200bpsREMOTE SENSORFRONT/BACKFRONT/BACK, FRONT, BACK CONTROL IDCONTROL ID NUMBER11–254CONTROL IDOFFOFF, ON OPTIONS(1) AUTO ADJUSTNORMALOFF, NORMAL, FINE FAN MODEAUTOMODE: AUTO, HIGH, HIGH ALTITUDENORMALSETTING: NORMAL, VERTICAL TILT UP SIGNAL SELECT(COMP3)RGB/COMPONENTRGB/COMPONENT, VIDEO SEAMLESS SWITCHINGOFFOFF, ON COLOR SYSTEM VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM S-VIDEOAUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAMCOMPUTER3 (VIDEO)AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAMDIGITAL AUDIO SELECTHDMIHDMIHDMI, COMPUTER2DisplayPortDisplayPortDisplayPort, COMPUTER2BEEPONOFF, ON * The asterisk (*) indicates that the default setting varies depending on the signal.
86 5. Using On-Screen Menu SETUPOPTIONS(2) STANDBY MODENORMALNORMAL, POWER-SAVING, NETWORK STANDBYDIRECT POWER ONOFFOFF, ONAUTO POWER ON(COMP1/3)OFFOFF, COMPUTER1, COMPUTER3AUTO POWER OFFOFFOFF, 0:05, 0:10, 0:20, 0:30 DEFAULT SOURCE SELECTLASTLAST, AUTO, COMPUTER1, COMPUTER2, COMPUTER3, HDMI, DisplayPort, VIDEO, S-VIDEO, VIEWER, NETWORK INFO. USAGE TIME LAMP LIFE REMAININGLAMP HOURS USEDFILTER HOURS USEDTOTAL CARBON SAVINGS SOURCE(1) INPUT TERMINALRESOLUTIONHORIZONTAL FREQUENCYVERTICAL FREQUENCYSYNC TYPESYNC POLARITYSCAN TYPESOURCE NAMEENTRY NO. SOURCE(2) SIGNAL TYPEVIDEO TYPEBIT DEPTHVIDEO LEVELLINK RATELINK LANE WIRED LAN IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS WIRELESS LAN(1) IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS WIRELESS LAN(2) SSIDNETWORK TYPEWEP/WPACHANNELSIGNAL LEVEL VERSION (1) FIRMWARED ATAFIRMWARE2SUB-CPUVERSION (2)FIRMWARE3 OTHERS PROJECTOR NAMEMODEL NO.SERIAL NUMBERLAN UNIT TYPECONTROL ID (when [CONTROL ID] is set) RESET CURRENT SIGNALALL DATAALL DATA(INCLUDING ENTRY LIST)CLEAR LAMP HOURSCLEAR FILTER HOURS
87 5. Using On-Screen Menu Menu Descriptions & Functions [SOURCE] COMPUTER 1, 2, and 3 Selects the computer connected to your COMPUTER 1, 2, or COMPUTER 3 input connector signal. NOTE: When the component input signal is connected to the COMPUTER IN, COMPUTER 2 IN, or COMPUTER 3 IN connector, select [COMPUTER1], [COMPUTER2] or [COMPUTER3] respectively. The projector automatically determines whether the COMPUTER1, 2, or 3 input signal is an RGB or component signal. HDMI Selects the HDMI compatible equipment connected to your HDMI IN connector. DisplayPort Projects the image of the device connected to the DisplayPort input connector. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera. VIEWER This feature enables you to make presentations using a USB memory that contains slides. (→ page 56 “4. Using the Viewer”) NETWORK Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional for models for Europe, Australia, Asia and other countries than North America). ENTRY LIST Displays a list of signals. See the following pages. TEST PATTERN Closes the menu and switches to the test pattern screen. The previous screen reappears when the EXIT button is pressed.
88 5. Using On-Screen Menu Using the Entry List When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjustment values of) registered signals can be loaded from the Entry List whenever necessary. However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete (adjustment values of) signals that are no longer needed. Displaying the Entry list 1. Press the MENU button. The menu will be displayed. 2. Press the or button to select [SOURCE]. The SOURCE list will be displayed. 3. Use the , , , or to select [ENTRY LIST] and press the ENTER button. The ENTRY LIST windows will be displayed. If the ENTRY LIST window is not displayed, switch the menu to [ADVANCED]. To switch the menu between [ADVANCED] and [BASIC], select [APPLICATION MENU] → [TOOLS] → [ADMINISTRATOR MODE]. (→ page 136)