NEC Projector P502HL Specifications

							P502WL  |  P502HL  
Professional Installation Projectors
P Series  
						

							Powerful installation projectors with 
laser-phosphor light source supports 
new, demanding projection applications.
    Laser Light Module
 
• 20,000-plus hours of virtually maintenance-free operation
 
• High-brightness, lower power consumption enhances applications such as r\
etail, digital signage and theme parks
 
• Ability to control brightness creating a stable image over longer time periods
 
     
Integrated and Powerful
 
• Project uncompressed FHD video with integrated HDBaseT
 
• High performance video processing/scaling creates life-like images
 
• Integrated software applications such as DisplayNote
®, Crestron Roomview, AMX Beacon and PJ Link allow for complete interactivity and control 
 
    Flexible
 
• Tilt-free installation capabilities make these projector ideal for almost any install environment, including portrait orientation
 
• +62 vertical lens shift and +/- 25% horizontal lens shift capabilities m\
ake alignment easy 
						

							Simplify your installations with HDBaseT. Optimized for video applications and supporting uncompressed full HD digital video, audio, ethernet, power 
and various control signals.  With only a single cable (up to 100m) to run, infrastructure and labor costs are reduced, installations are significantly easier, 
and there is no cable clutter to manage. With uncompressed HD video support, images have never been more stunning.  What’s more, control signals 
are contained in the same cable.
Built-In HDBaseT Support
Input panel cover
This optional accessory 
creates a clean look for 
your installation, while 
hiding signal cables and 
the power cord.
ADVANCED SOFTWARE FEATURES
Cornerstone 
Enhanced keystone 
correction allows for 
horizontal, vertical and 
diagonal image correction 
for aligned images even 
when the projector is 
set up at an angle to the 
screen.
Wall color correction presets 
These provide for adaptive color tone correction to display properly on 
non-white surfaces.
On a  green wall...BEFORE  auto wall correctionAFTER  auto wall correction
3D 
When combined with active shutter 
glasses and 3D emitter, the 
P Series Projectors create 3D 
images from a computer or Blu-ray 
player. The P502WL/P502HL utilize 
the 3D sync line output from the 
projector to connect to the 3D 
emitter. Optional 3D glasses and 
emitters from XPAND are available 
from NEC.
GET CONNECTED WITH A WIDE SELECTION OF INPUTS
• Dual computer inputs ensure quick switching between presentations
Remote control
Easy control from remote 
allows you to adjust lamp 
mode, aspect ratio, volume 
and image all with the touch 
of a button. 
Portrait mode
Allows the projector to be rotated (and screen if 
necessary) to a vertical alignment so that portrait 
content can be viewed without black bars on the 
side when landscape mode is used.
Tilt-free
The projector can be rotated freely 
(360°) to orient the image depending 
on the installation requirements          
						

							* Lens does not ship with the projector.
  Additional accessories are available, including screens, carts, mount accessories and replacement cables. Visit www.necdisplay.com for details.
3D Reform, Advanced AccuBlend, AutoSense and ECO Mode are trademarks of NEC Display Solutions. HDMI, the HDMI Logo 
and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other brand or product 
names are trademarks or registered trademarks of their respective holders. Product specifications subject to change.
©2015 NEC Display Solutions of America, Inc. All rights reserved.
Cat.No. 25.NEC.80.GL.UN.193   |       rev 08.4.15
NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE
www.necdisplay.com
NEC P502WL/P502HL Specifications
P502WL P502HL
Display Technology 0.65” DMD
Light Output (lumens) 5000 normal / Eco = variable
Resolution Native
P502WL: WXGA 1280 x 800  1080p 1920 x 1080
Maximum WUXGA 1920 x 1200
Contrast Ratio (up to) 15,000:1 with auto iris
Laser Life (up to) 20,000 hours
Screen Size (diagonal) 30 to 300 in. / 0.76 to 7.62m
Throw Ratio P502WL: 1.3 - 2.2 1.24 - 2.1
Projection Distance P502WL: 2.6 to 46.6 ft. / 0.8 to 14.2m  2.6 to 47.6 ft. / 0.8 to 14.5m
Projection Angle P502WL: 12.6 to 12.9° tele / 21.0 to 21.9° wide 13.2 to 13.5° tele / 21.9 to 22.9° wide
Lens*  Zoom
Manual
Zoom Ratio 1.7:1
Focus Manual
F-number, f-number F= 2.0, f= 18.2 to 31.1mm
Shift P502WL: Manual +0.59 vertical, +/-28 horizontal  Manual +0.62 vertical, +/-25 horizontal
Keystone Correction +/- 25° horizontal, +/- 30° vertical
Scan Rate Horizontal
15 – 100 kHz
Vertical 50 – 120 Hz
Supported Video Standards NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM
SD/HD Video Signal Compatibility 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA
Macintosh Compatibility Ye s
Input/Output Terminals RGB1 (analog)
15 pin, Component video using ADP-CV1E adapter 
RGB2 (digital) HDMI w/HDCP 
RGB3 (digital) HDMI w/HDCP 
RGB4 (digital) HDBaseT 
Video RCA 
Audio 1 L/R RCA (shared by video sources) 
Audio 2 1/8 in. stereo  
Audio Out mini stereo (Variable audio out) 
Monitor Out 15Pin D-sub
3D Sync Line 3Pin D
Audio 20W mono   
External Control RS-232, IR, HDBaseT, DDC/CI, USB
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Power Requirements 100 – 240V AC, 50/60Hz
Input Current 5.7A - 2.3A
Power Consumption  
(ECO off/ECO Mode/Standby/Standyby-Power 
Saving) 464W / 362W / 2.1W / 0.5W
Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
Dimensions (WxDxH) 18.5 x 14.4 x 5.4 in. / 469 x 365 x 137mm
Net Weight 19.4 lbs. / 8.8 kg
Fan Noise 39 dB normal / 33 dB eco
Regulations USA: UL(UL60950-1, Laser + Lamp (IEC60825-1 Ed.3 + IEC62471-1/-5), FC\
C Part15 Class B
Canada: CUL(UL60950-1, Laser + Lamp (IEC60825-1 Ed.3 + IEC62471-1/-5)\
, ICES-003 Class B
Operating Temperature 41° – 104°F / 5° – 40°C
Humidity 20-80% non-condensing
Storage -14° – 122°F / -10° – 50°CUNIQUE FEATURES 
3D Reform™ allows you to square the image by adjusting 
horizontally, vertically or diagonally when the projector cannot 
be placed parallel or perpendicular to the screen
Advanced AccuBlend™ ensures detailed images when non-
native resolution sources are connected to the projector
AutoSense™ automatically syncs with any computer signal 
and features one-touch image optimization
64-step image magnification with location control
Discreet source keys for source selection
Remote diagnostics enable the user to monitor and make 
adjustments to the projector remotely
Built-in HTTP page for control and monitoring over a LAN 
network. Email notification of error messages or lamp end-of-
life can be sent to remote locations.
WARRANTY
Registered owners receive a 3-year parts (excluding 
consumables) and labor warranty including the first year of 
InstaCare. InstaCare provides the original owner one year of 
either limited 3 business day repair/return or next business day 
exchange.
SHIPS WITH
Remote control, batteries, power cord, user’s manual on 
CD-ROM, quick start guide, product registration card.
ACCESSORIES  
SCP200  Suspended ceiling plate
PA600CM     Ceiling mount
NP05LM1     Wireless LAN Module
RMT-PJ35     Replacement remote control
PWRCRD-PJPX   Power cable
RGBCBL-PJPX   RGB cable
NP08CV     Safety Cover for Portrait Installation
X105-RF-X2   XPAND 3D RF Glasses
AD025-RF-X11   XPAND 3D RF Transmitter
NECEW2-I     Extends term of parts and labor 
    warranty to 4 years
ADVEXON1-I   Extends term of InstaCare service 
    program to 2 years
ADVEXON2-I   Extends term of InstaCare service 
    program to 3 year
ORDERING MODEL NUMBERS
NP-P502WL
NP-P502HL