NEC Projector P502H Specifications

							P452W | P452H | P502W | P502H 
Professional Installation Projectors
P Series  
						

							Integrated and Powerful
• Project uncompressed FHD video with integrated HDBaseT
•  High performance video processing/scaling creates life-like images
•  Integrated software applications such as Crestron Roomview, AMX Beacon and PJ Link allow for complete interactivity and control
 
 
Flexible
•  Tilt-free installation capabilities make these projector ideal for almost any install environment, including portrait orientation
•  Lens shift capabilities make alignment easy: P452W/P502W (+59 vertical,\
 +/- 28% horizontal),  P502W/P502H (+62 vertical, +/- 25% horizontal)
Simplify your installations with HDBaseT. Optimized for video applications 
and supporting uncompressed full HD digital video, audio, ethernet, 
power and various control signals.  With only a single cable (up to 
100m) to run, infrastructure and labor costs are reduced, installations 
are significantly easier, and there is no cable clutter to manage. With 
uncompressed HD video support, images have never been more 
stunning.  What’s more, control signals are contained in the same cable.
Built-In HDBaseT Support
Powerful installation projectors with 
laser-phosphor light source supports new, 
demanding projection applications.
Wireless LAN  
module (optional)
Advanced Networking Capabilities
• Integrated RJ45 connection for quick connection to the LAN (10/100 base\
-T capability)
•  Remote diagnostics enable the user to monitor and make adjustments to th\
e projector remotely
•  PC CTL 4.0 controls the power switching input selection and other functions while managi\
ng lamp usage and a variety of other vital 
information over the network. Email notification and projector scheduling for better asset management is included with the soft\
ware.
•  PC CTL 5.0 for MAC users
•  Control and receive important broadcast messages via Crestron Roomview™
•  Wireless Image Utility (WIU) sends images directly from an iPad to the projector (requires wireless LAN module NP05LM1)
•  Simple Access Point Sending photos and documents have never been easier \
from a computer or iPad.
•  MultiPresenter enables up to 16 wireless devices to be connected to the projector simultaneously with access controlled by the moderator.
Image Express Lite
Dedicated projector software provides wired and wireless data and 
audio transmission via peer-to-peer or over the network. 
						

							Input panel cover
This optional accessory creates a clean look for 
your installation, while hiding signal cables and 
the power cord.
FUll HD 3D video (144Hz)
On a  green wall...BEFORE  auto wall correctionAFTER  auto wall correction
When combined with active shutter glasses and 3D emitter, the M Series Projectors create 3D images from a 
computer or Blu-ray player. The projectors utilize the 3D sync line output to connect to the 3D emitter. Optional 3D 
glasses and emitters by XPAND are available from NEC (X105-RF-X2 / AD025-RF-X1)
NEC P Series Projectors 
Remote control
Easy control from remote allows 
you to adjust lamp mode, aspect 
ratio, volume and image all with 
the touch of a button.
Dual HDMI inputs
Among the M Series’ wide selection of inputs 
are 2 HDMI w/HDCP (one MHL compatible) 
for connecting to high-definition sources 
such as Blu-ray players, cable boxes, satellite 
receivers and personal computers.
Variable audio-out
This input enables the remote control to be 
used to adjust volume of self powered external 
speakers that are connected to the projector. 
In stand-by mode, the audio-out stays active, 
allowing the last input used 
to pass to the self-powered 
external speakers.
P Series Features
Top cover lamp change 
This feature provides for  easy lamp 
changes without removal of the 
projector from 
the mount.
Multi-screen Projection Function* 
The multi-screen projection function allows you to share screens 
from multiple devices on various split-screen displays. Display 
information from up to 16 PCs, tablet PCs, smart phones, and 
other network connected devices on a multi-screen display of up 
to 16 screens. Easily share screens and information regardless of 
device or operating system.
*Requires an optional wireless LAN module for wireless 
connection.  PCs require the installation of the Image Express 
Utility Lite software on the included CD-ROM. Smart phones and 
tablets require the download and installation of our Wireless
 Image Utility software.
Wall color correction presets 
These provide for adaptive color tone correction 
to display properly on non-white surfaces.   
						

							  Additional accessories are available, including screens, carts, mount accessories and replacement cables. Visit www.necdisplay.com for details.
NEC P452W/P452H/P502W/P502H Specifications
P452W  |  P502WP452H  |  P502H 
Display Technology 0.65” DMD
Light Output (lumens) 5000 normal / Eco = variable
Resolution Native
WXGA 1280 x 800  1080p 1920 x 1080
Maximum WUXGA 1920 x 1200
Contrast Ratio (up to) 6,000:1 with auto iris
Lamp Life (up to) 5000 hours
Screen Size (diagonal) 30 to 300 in. / 0.76 to 7.62m
Throw Ratio 1.3 - 2.21.24 - 2.1
Projection Distance 2.6 to 47.6 ft. / 0.8 to 14.5m 2.6 to 46.6 ft. / 0.8 to 14.2m
Projection Angle 12.6 to 12.9° tele / 21.0 to 21.9° wide13.2 to 13.5° tele / 21.9 to 22.9° wide
Lens  Zoom
Manual
Zoom Ratio 1.7:1
Focus Manual
F-number, f-number F= 2.0, f= 18.2 to 31.1mm
Shift Manual +0.59 vertical, +/-28 horizontal  Manual +0.62 vertical, +/-25 horizontal
Keystone Correction +/- 25° horizontal, +/- 30° vertical
Scan Rate Horizontal
15 – 100 kHz
Vertical 50 – 120 Hz
Supported Video Standards NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM
SD/HD Video Signal Compatibility 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
PC Signal Compatibility VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA
Macintosh Compatibility Ye s
Input/Output Terminals RGB1 (analog)
15 pin, Component video using ADP-CV1E adapter 
RGB2 (digital) HDMI w/HDCP 
RGB3 (digital) HDMI w/HDCP 
RGB4 (digital) HDBaseT 
Video RCA 
Audio 1 L/R RCA (shared by video sources) 
Audio 2 1/8 in. stereo  
Audio Out 1/8 in. stereo (Variable audio out) 
Monitor Out 15Pin D-sub
3D Sync Line 3Pin D
Audio 20W mono   
External Control RS-232, IR, HDBaseT, RJ45, DDC/CI, USB
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Power Requirements 100 – 240V AC, 50/60Hz
Input Current 4.9A to 2.0A     |      5.4A to 2.2A 4.9A to 2.0A     |      5.4A to 2.2A
Power Consumption  
(ECO off/ECO Mode/Standby/Standyby-Power 
Saving) P452W - 426W / 288W / 2.7W / 0.26W
P502W - 465W / 311W / 2.7W / 0.26W
P452H - 426W / 288W / 2.7W / 0.26W
P502H - 465W / 311W / 2.7W / 0.26W
Installation Orientation Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear
Dimensions (WxDxH) 14.3 x 12.1 x 5.5 in. / 362 x 306 x 139mm
Net Weight 11.5 lbs. / 5.2 kg
Fan Noise 39 dB normal / 31 dB eco
Regulations USA: UL(UL60950-1, FCC Part15 Class B
Canada: CUL(UL60950-1, CES-003 Class B
Operating Temperature 41° – 104°F / 5° – 40°C
Humidity 20-80% non-condensing
Storage -14° – 122°F / -10° – 50°CUNIQUE FEATURES 
Advanced AccuBlend™ ensures detailed images when non-
native resolution sources are connected to the projector
AutoSense™ automatically syncs with any computer signal 
and features one-touch image optimization
64-step image magnification with location control
Discreet source keys for source selection
Remote diagnostics enable the user to monitor and make 
adjustments to the projector remotely
Built-in HTTP page for control and monitoring over a LAN 
network. Email notification of error messages or lamp end-of-
life can be sent to remote locations.
WARRANTY
Registered owners receive a 3-year parts (excluding 
consumables) and labor warranty including the first year of 
InstaCare. InstaCare provides the original owner one year of 
either limited 3 business day repair/return or next business day 
exchange.
SHIPS WITH
Remote control, batteries, power cord, user’s manual on 
CD-ROM, quick start guide, product registration card.
ACCESSORIES  
SCP200  Suspended ceiling plate
MP300CM     Ceiling mount
NP05LM1     Wireless LAN Module
RMT-PJ35     Replacement remote control
PWRCRD-VT70  Power cable
RGBCBL-PJPX   RGB cable
NP38LP   Replacement Lamp for P452W/P452W
NP39LP   Replacement Lamp for P502W/P502W 
NP09CV     Terminal Cover
X105-RF-X2   XPAND 3D RF Glasses
AD025-RF-X11   XPAND 3D RF Transmitter
NECEW1-I   Extends term of parts and labor 
    warranty to 4 years 
NECEW2-I     Extends term of parts and labor 
    warranty to 5 years
ADVEXON1-I   Extends term of InstaCare service 
    program to 2 years
ADVEXON2-I   Extends term of InstaCare service 
    program to 3 year
DNSL    DisplayNote Site License
ORDERING MODEL NUMBERS
NP-P452W  NP-P452H
NP-P502W   NP-P502H
3D Reform, Advanced AccuBlend, AutoSense and ECO Mode are trademarks of NEC Display Solutions. HDMI, the HDMI Logo and High-Defi\
nition 
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other brand or product names are trademarks or registered 
trademarks of their respective holders. Product specifications subject to change.
©2015 NEC Display Solutions of America, Inc. and the NEC logo are registered trademarks of NEC.
www.necdisplay.comCat.No. 25.NEC.80.GL.UN.206   |   Rev. 11.02.2015