NEC Projector P501x User Manual

199
8. User Supportware
10	Click	the	computer	at	the	connection	destination	and	then	[OK].
	 The	desktop	screen	of	the	computer	at	the	connection	destination	will	be	displayed.
•	Operating	the	projector	(manipulating	desktop	screen)
The	displayed	 desktop	screen	can	be	manipulated	 by	using	 the	USB	 mouse	 connected	 to	the	 projector. 	If	 the	 EXIT	
button	 of	the	 projector	 or	remote	 control	is	pressed	 while	the	desktop	 screen	is	displayed,	 an	auxiliary	 operation	 bar	
is	displayed	at	the	lower...

200
8. User Supportware

  (cut-off icon) �������Disconnects communication with the computer �
  (Shift icon) ����������When the highlight is moved to this icon and the ENTER button is pressed, shift lock status is set� 
The  shift  lock  is  canceled  if  the  highlight  is  moved  to  this  icon  and  the  ENTER  button  is  pressed 
again�
  (Ctrl icon) ������������When the highlight is moved to this icon and the ENTER button is pressed, control lock status is set� 
The control lock is canceled if the...

201
8. User Supportware
•	Operating	the	projector	(exiting	Desktop	Control	Utility	1.0)
1	 Click	the	projector	icon	[]	on	the	taskbar	while	the	desktop	screen	is	displayed.
2	 Click	[Exit].
	 Desktop	Control	Utility	1.0	will	be	terminated.
3 Press the EXIT button on the projector unit or on the remote control.
	 The	 “network	menu” 	screen	will	be	displayed.
4 Press the MENU button on the projector unit or on the remote control.
 The on-screen menu will be displayed.
5	 Select	an	input	source	other	than...

202
8. User Supportware
❼ Controlling the Projector over a LAN (PC Control Utility Pro 4/
Pro 5)
Using	 the	utility	 software	 “PC	Control	 Utility	Pro	4”	or	 “PC	 Control	 Utility	Pro	5”	included	 on	the	 companion	 NEC	Pro-
jector	CD-ROM,	the	projector	can	be	controlled	from	a	computer	over	a	LAN.
PC	Control	Utility	Pro	4	is	a	program	compatible	with	 Windows.	(→	this	page)
PC	Control	Utility	Pro	5	is	a	program	compatible	with	Mac	OS. 	(→	page	205)
Control	Functions
Power	On/Off,	 signal	selection,...

203
8. User Supportware
TIP:
If	the	menu	window	will	not	be	displayed,	try	the	following	procedure.
For	Windows	7:
1.	 Click	“start”	on	Windows.
2.	 Click	 “All	Programs” 	→	“Accessories” 	→	“Run”.
3.	 Type 	your 	CD-ROM 	drive 	name 	(example: 	“Q:\”) 	and 	“LAUNCHER.EXE” 	in 	“Name”. 	(example: 	Q:\
LAUNCHER.EXE)
4.	 Click	 “OK”.
 the menu window will be displayed.
2	 Click	 “PC	Control	Utility	Pro	4” 	on	the	menu	window.
 The installation will start.
 When the installation is complete, the Welcome...

204
8. User Supportware
Step 2: Connect the projector to a LAN.
Connect	the	projector	 to	the	 LAN	 by	following	 the	instructions	 in	“Connecting	 to	a	Wired	 LAN”	(→	page	151),	 “Con-
necting	 to	a	Wireless	 LAN	(Optional: 	NP02LM	 series)”	(→	page	152)	 and	 “9.	Controlling	 the	Projector	 by	Using	 an	
HTTP	Browser” 	(→	page	42)
Step 3: Start PC Control Utility Pro 4
Click	“Start” 	→	“All	 programs” 	or	 “Programs” 	→	“NEC	 Projector	 User	Supportware” 	→	“PC	 Control	 Utility	Pro	4”	→ 
“PC	Control...

205
8. User Supportware
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1.	 Insert	the	accompanying	NEC	Projector	CD-ROM	in	your	Mac	CD-ROM	drive.
	 The	CD-ROM	icon	will	be	displayed	on	the	desktop.
2.	 Double-click	the	CD-ROM	icon.
 The CD-ROM window will be displayed.
3.	 Double-click	the	 “Mac	OS	X”	folder.
4.	 Double-click	 “PC	Control	Utility.mpkg”.
 The installer will start.
5.	 Click	 “Next”.
	 “END	USER	LICENSE	AGREEMENT” 	screen	will	be	displayed.
6.	 Read	“END	USER...

206
9. Appendix
❶ Troubleshooting
This	section	helps	you	resolve	problems	you	may	encounter	while	setting	up	or	using	the	projector.
Indicator Messages
Power	Indicator
Indicator ConditionProjector	ConditionNote
Off The main power is off –
Blinking light Blue
0�5 sec On,0�5 sec OffThe projector is getting ready to turn on�Wait for a moment�
2�5 sec On,0�5 sec OffOff Timer is enabled�–
Orange
2�5 sec On,0�5 sec OffOn Timer is working�–
0�5 sec On,0�5 sec OffAfter cooling�–
Steady light Blue
The projector...

207
9. Appendix
Common Problems & Solutions
(→	“Power/Status/Lamp	Indicator” 	on	page	206.)
ProblemCheck	These	Items
Does not turn on or 
shut down•	 Check	 that	the	power	 cord	is	plugged	 in	and	 that	 the	power	 button	 on	the	 projector	 cabinet	or	the	 remote	 control	is on� (→ pages 14, 15)•	 Ensure	that	the	lamp	cover	is	installed	correctly.	(→ page 162)•	 Check	 to	see	 if	the	 projector	 has	overheated.	 If	there	 is	insufficient	 ventilation	around	the	projector	 or	if	the	 room	where you are...

208
9. Appendix
If there is no picture, or the picture is not displayed correctly.
•	 Power	on	process	for	the	projector	and	the	PC.
	 Be	sure	to	connect	 the	projector	 and	notebook	 PC	while	 the	projector	 is	in	 standby	 mode	and	before	 turning	 on	
the	power	to	the	notebook	PC.
	 In	most	cases	 the	output	 signal	from	the	notebook	 PC	is	not	 turned	 on	unless	 connected	 to	the	 projector	 before	
being	powered	up.
NOTE:	You	can	check	 the	horizontal	 frequency	of	the	 current	 signal	in	the...