NEC Projector Np4000 User Manual

3. Projecting an Image (Basic Operation) 
39 
o Selecting a Source 
The Source can be selected from the projectors  control panel or from the remote control unit. 
Refer to the following gui de to select Source. 
1.  Press  Menu  on the OSD 
control panel or on the 
remote control unit to dis-
play the  Main Menu . 
Scroll to the  Source menu 
using  ▲or▼  and press 
Enter . 
 
Note:   
Return to the projected 
image by pressing  Exit 
twice. 
 
2.   Select the required source 
using  ▲or▼  and press...

3. Projecting an Image (Basic Operation) 
40
p Adjusting the Picture Position and Picture Size 
The Picture Position and Picture Size can be adjus ted manually from the lens control panel or 
from the remote control unit. Refer to the follo wing guides to adjust Picture Position manually. 
Adjusting Picture Position Manually 
1.  Press the Select keypad in 
any direction to bring up 
the Lens Shift window. 
 
2.  Press the directional key 
as required to shift the 
image. Releasing the  
directional...

3. Projecting an Image (Basic Operation) 
41 
4.  The  Aspect Ratio  win-
dow is displayed. Select 
the desired picture size 
using  ▲or▼  and press 
Enter . 
Note:  
The NP4000 and NP4001 
support different Aspect 
Ratio options as shown. 
5.   When finished, press  Exit 
to return to the projected 
image.  NP4000 Aspect Ratio Options
 
 
NP4001 Aspect Ratio Options 
 
  

3. Projecting an Image (Basic Operation) 
42
Lens Shift Adjustable Range 
The adjustable range for lens shift is tabulated below and subject to the conditions listed. 
Note: 
The drawings below are applied to the lenses for NP07ZL, NP08ZL, NP09ZL, and 
NP10ZL. The lens for NP06FL does not have a lens shift feature. 
 
 
From the Remote Control Unit 
1.   Press the  Lens Shift  but-
ton to bring up the Lens 
Shift window. 
  

3. Projecting an Image (Basic Operation) 
43 
2.  Press the directional keys 
as required to shift the 
image. Releasing the di-
rectional arrow will re-
center the cursor. 
 
3.  To alter the picture size, 
press the  Aspect button to 
display the Aspect Ratio 
window. 
Note:  
The NP4000 and NP4001 
support different Aspect 
Ratio options as shown. 
4.   Select the desired picture 
size using  ▲or▼  and 
press  Enter . 
5.  When finished, press  Exit 
to return to the projected 
image.  NP4000 Aspect...

3. Projecting an Image (Basic Operation) 
44
Adjusting the Projector Level 
1.  To raise the level of the projec-
tor, twist the adjusters clockwise. 
 
2.  To lower the level of the projec-
tor, lift the projector and twist 
the adjusters counter clockwise.  
 
 
 
 
  

3. Projecting an Image (Basic Operation) 
45 
q Optimizing an RGB Image Automatically 
Adjusting the Image Using Auto Adjust
 
To optimize an RGB image automatically refer to the following guide. 
Press the Auto ADJ. button on the Remote Unit (see item 27, 
s  Part Names of the Re-
mote Control on page 
12 ) to optimize an RGB image automatically. 
This adjustment may be necessary when you  connect your computer for the first time. 
  

3. Projecting an Image (Basic Operation) 
46
r Adjusting Volume Up and Down 
The volume can be adjusted from the OSD Control Panel or with the Remote Control unit. 
Refer to the following as a guide. 
1.  Press the  Volume +/-   
buttons on the remote 
control or the  Select pad 
left and right keys on the 
OSD control panel. The 
volume level is displayed 
on screen. 
2.   Use the  Volume +/-  but-
tons or the  Select pad left 
and right keys on the OSD 
control panel to adjust the 
level. 
 
 
  

3. Projecting an Image (Basic Operation) 
47 
s Turning off the Projector 
Once the projector is no longer required, it is  important to shut it down correctly to avoid 
damage or unnecessary wear and tear to the projector. 
CAUTION 
 •
  Do not unplug the power cable from the wall outlet or projector when 
the projector is powered on. Doing so can cause damage to the AC IN 
connector of the projector and (or)  the prong plug of the power cable. 
To turn off the AC power supply when the projector is...

3. Projecting an Image (Basic Operation) 
48
About Direct Power Off 
The projector has a feature called Direct Power Off. This feature allows the projector to 
be turned off (even when projecting an image) using a power strip equipped with a 
switch and a breaker. 
Note: 
Before using Direct Power Off, be sure to  allow at least 20 minutes immediately 
after turning on the projector and starting to display an image. 
After Use 
Preparation: Make sure that the projector is turned off.  
1.  Unplug the...