NEC Projector Np3250 User Manual

0
6. Using On-Screen Menu
[INSTALLATION(1)]
Selecting Projector Orientation [ORIENTATION]
This  reorients  your  image  for  your  type  of  projection. The  options  are:  desktop  front  projection,  ceiling  rear  projec-
tion, desktop rear projection, and ceiling front projection.
DESKTOP FRONTCEILING REAR
DESKTOP REARCEILING FRONT 

08
6. Using On-Screen Menu
no-signal area
Selecting Aspect Ratio and Position for Screen [SCREEN]
SCREEN.TYPE........Select.one.of.two. options:. 4:3.SCREEN. or.WIDE. SCREEN. for.the. screen. to.be. used.. See.also. [ASPECT.
RATIO]..
(→.page.93)
POSITION...............This.feature. allows.you.to.adjust. the.vertical. position. of.the. image. when.WIDE. SCREEN. has.been. selected.
for.the.screen.type.
When.WIDE.SCREEN.has.been.selected.there.is.no-signal.area.above.and.below.the.image.
NOTE: This...

09
6. Using On-Screen Menu
Using Multi-Screen Compensation [MULTI-SCREEN COMP.]
This feature allows you to match images projected from multiple projectors that are placed in parallel.
MODE.....................OFF:.Turns.off.this.function.to.return.to.the.normal.brightness...
ON:.Turns. on.this. function. to.make. the.screen. darker.. The.[BRIGHTNESS]. and.the.[CONTRAST]. can.be.
adjusted.
CONTRAST.............Adjusts.the.bright.part.of.the.picture....

0
6. Using On-Screen Menu
[INSTALLATION(2)]
[NETWORK SETTINGS]
This feature allows you to set various setting items when the projector is used on your network.
CAUTION
• Consult with your network administrator about these settings.
• The NP3250/NP2250/NP1250/NP3250W series projectors distributed in some areas and countries do not 
come standard with the USB Wireless LAN Unit.
 If you purchase the projector without the USB Wireless LAN Unit installed and need to present to the pro-
jector via a...


6. Using On-Screen Menu
To receive error messages or information on the remaining lamp life via e-mail:
1. On the [MAIL] tab, select [ALERT MAIL] and press the ENTER button. A check mark will be placed. 
2.  Set  [SENDER’S  ADDRESS],  [SMTP  SERVER  NAME]  and  [RECIPIENT’S  ADDRESS].  Select  [OK]  and 
press the ENTER button.
  (→ page 118)
To execute [EASY CONNECTION] using Image Express Utility 2.0:
The [EASY CONNECTION] is a mode that can abbreviate the troublesome LAN settings when...


[PROJECTOR NAME]
Specify a unique projector name. Press  to display the software keyboard and type in. Up to 16 alphanumeric 
characters, signs and symbols can be used. After entering a name, select [OK] and press the ENTER button.
NOTE: The [PROJECTOR NAME] will not be affected even when [RESET] is don\
e from the menu.
Using Software Keyboard
1.to.0.and
Characters........Use.to.type.in.password.or.keyword....

3
6. Using On-Screen Menu
[WIRED]
PROFILES (for LAN port [RJ-45]):
Up to two settings for the LAN port (RJ-45) can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRED] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press...

4
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select [EAS\
Y CONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. 
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After...

5
6. Using On-Screen Menu
[ADVANCED] menu
[CONNECTION] (required for wireless only)
SITE SURVEY:
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access.
To select an SSID, highlight [SSID] and use the SELECT  to select [OK] and press the ENTER button.
 : Wireless access point
 : Ad Hoc PC
 : WEP or WPA enabled
SSID (Network name):
Enter  an  identifier  (SSID)  for  wireless  LAN  when  selecting  [INFRASTRUCTURE]  or  [AD  HOC]  in  [NETWORK 
TYPE]....


6. Using On-Screen Menu
[SECURITY] (required for wireless only)
SECURITY TYPE
Select encryption mode for secure transmission.
When [WEP] or [DISABLE] is selected in [SECURITY TYPE]:
Select  this  option  whether  using  the WEP  (Wired  Equivalent  Privacy)  key  for  encryption  or  not. To  use  encryp-
tion, specify WEP key.
DISABLE.................Will.not.turn.on.the.encryption.feature..Your.communications.may.be.monitored.by.someone....