NEC Projector M353WS User Manual

							140
8. Appendix
Model NumberNP-M403WNP-M363WNP-M323W NP-M403XNP-M363XNP-M323XNP-M283X
Compatible 
Signals*
6Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/UXGA/WSXGA+/HD/Full HD/WUXGA/Mac13"/Mac16"/Mac 19"/Mac 21"/Mac 23"Component: 480i/480p/720p/1080i (60Hz), 576i/576p/1080i (50Hz), DVD Progressive (50/60Hz)Digital: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/WSXGA+/HDTV (1080p)/HDTV (1080i)/HDTV (720p)/SDTV(480p)/SDTV(576p)/SDTV(480i)/SDTV(576i)3D: For PC XGA/1280 × 720/WXGA, For Video SDTV (480i), For HDMI-1.4a 720p (Frame Packing)/ 1080p (Frame Packing)/1080i (Side by Side (Half))/720p (Top and Bottom)/1080p (Top and Bottom)Horizontal 
Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz (HDMI: 50 Hz to 85 Hz)
Sync Compat-
ibility Separate Sync
Built-in Speaker 20 W (monaural)
Power Require-
ment 100–240 V AC, 50/60Hz
Input Current 3.9 - 1.6 A 3.6 - 1.5 A3.3 -1.4 A3.9 - 1.6 A3.6 - 1.5 A3.3 -1.4 A3.0 - 1.2 A
Power 
Consump-
tion
(Typical 
value)ECO MODE 
OFF338W (100-130 V)
320W (200-240 V)
316W (100-130 V)
301W (200-240 V)283W (100-130 V)
269W (200-240 V)338W (100-130 V)
320W (200-240 V)316W (100-130 V)
301W (200-240 V)283W (100-130 V)
269W (200-240 V) 255W (100-130 V)
242W (200-240 V)
NORMAL276W (100-130 V)
264W (200-240 V) 240W (100-130 V)
229W (200-240 V)218W (100-130 V)
208W (200-240 V)276W (100-130 V)
264W (200-240 V)240W (100-130 V)
229W (200-240 V)218W (100-130 V)
208W (200-240 V) 207W (100-130 V)
197W (200-240 V)
ECO221W (100-130 V)
210W (200-240 V) 205W (100-130 V)
197W (200-240 V)186W (100-130 V)
179W (200-240 V)221W (100-130 V)
210W (200-240 V)205W (100-130 V)
197W (200-240 V)186W (100-130 V)
179W (200-240 V) 170W (100-130 V)
162W (200-240 V)
STANDBY 
(NETWORK 
STANDBY)2.6W (100-130 V)/ 2.9W (200-240 V)
STANDBY 
(NORMAL)0.15W (100-130 V)/0.32W (200-240 V)
Mechanical
Model NumberNP-M403W NP-M363WNP-M323W NP-M403XNP-M363XNP-M323XNP-M283X
Installation
Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 14.5" (W) × 3.8" (H) × 11.3" (D) /368 mm (W) × 97.5 mm \
(H) × 286 mm (D) 
(not including protrusions)
Weight 7.7 lbs/3.5 kg 7.5 lbs/3.4 kg7.7 lbs/3.5 kg 7.5 lbs/3.4 kg
Environmental 
Considerations Operational Temperatures : 41° to 104°F (5° to 40°C), 
(ECO mode selected automatically at 95°F to 104°F/35°C to 40°C) 
20% to 80% humidity (non-condensing) 
Storage Temperatures : 14° to 122°F (-10° to 50°C), 
20% to 80% humidity (non-condensing)
Operating altitude: 0 to 2400 m/8000 feet (Set [FAN MODE] to [HIGH ALUTITUDE] when using the projector at altitudes approximately 
1700 meters /5500 feet)
Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) 
						

							141
8. Appendix
[M353WS/M303WS/M333XS]
Optical
Model NumberNP-M353WSNP-M303WS NP-M333XSProjection	SystemSingle	DLP®	chip	(0.65",	aspect	16:10)Single	DLP®	chip	(0.55",	aspect	4:3)
Resolution*11280	×	800	pixels	(WXGA)1024	×	768	pixels	(XGA)LensDigital	zoom	and	manual	focusDigital	Zoom	Ratio	=	1.2F2.4/	f=6.5	mmLamp270	 W	AC	(219	 W	in	NORMAL)(162	W	in	ECO)
225	W	AC	(171	 W	in	NORMAL)(135	W	in	ECO)
270	W	AC	(219	 W	in	NORMAL)(162	W	in	ECO)Light	Output*2*33500 lumens 3000 lumens3300 lumens NORMAL:	81%NORMAL:	76%NORMAL:	81%ECO:	60%*4
Contrast	Ratio*3
(full	white: 	full	black)10000:1	with	DYNAMIC	CONTRAST	ON
Image	Size	(Diagonal)60–150	inches/1.52	m–3.81	m	(16:10)60–150 inches/1.52 m–3.81 m 
(4:3)
Projection	Distance(Min.–Max.)22.2–58.3	inches/0.57–1.48	m26.6–69.2	inches/0.68–1.76	m	
Projection	Angle40.7°–40.9° 40.7°–40.8°
*1	 Effective	pixels	are	more	than	99.99%.*2	 This	is	the	 light	 output	 value	(lumens)	 when	the	[PRESET]	 mode	is	set	 to	[HIGH-BRIGHT]. 	If	 any	 other	 mode	 is	selected	 as	the	[PRESET]	mode,	the	light	output	value	may	drop	slightly.*3	 Compliance	with	ISO21118-2012*4	The	maximum	power	becomes	equivalent	to	power	in	ECO	(ECO	MODE).
Electrical
Model NumberNP-M353WS NP-M303WS NP-M333XS
Inputs1	×	RGB/Component	(D-Sub	15	P),	2	×	HDMI	 Type	A	(19P,	HDMI®	Terminal)	HDCP	supported*5, 1	×	 Video	(RCA),	1	×	(L/R)	RCA	Audio,	1	×	Stereo	Mini	AudioOutputs1	×	RGB	(D-Sub	15P),	1	×	Stereo	Mini	AudioPC	Control1	×	PC	Control	Port	(D-Sub	9P)Wired	LAN	Port1	×	RJ-45	(10BASE-T/100BASE-TX)Wireless	LAN	Port	 
(Optional)IEEE	802.11	b/g/n	(optional	USB	 Wireless	LAN	Unit		required)
USB	Port1	×	Type	A,	1	×	 Type	BMIC	Input1	×	Monaural	Mini	AudioColor	Reproduction10-bit	signal	processing	(1.07	billion	colors)	(USB-A,	LAN: 	16.7	million	colors)Compatible	Signals*6Analog:	VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/UXGA/WSXGA+/HD/Full	HD/WUXGA/Mac13"/Mac16"/Mac	19"/Mac	21"/Mac	23"	Component: 	480i/480p/720p/1080i	(60Hz),	576i/576p/1080i	(50Hz),	DVD	Progressive	(50/60Hz)Digital:	VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/WSXGA+/HDTV	(1080p)/HDTV	(1080i)/HDTV	(720p)/SDTV(480p)/SDTV(576p)/SDTV(480i)/SDTV(576i)3D: 	For	PC	XGA/1280	×	720/WXGA,	For	 Video	SDTV	(480i),	For	HDMI-1.4a	720p	(Frame	Packing)/ 1080p	(Frame	Packing)/1080i	(Side	by	Side	(Half))/720p	(Top	and	Bottom)/1080p	(Top	and	Bottom)Horizontal	Resolution540	TV	lines: 	NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60300	TV	lines: 	SECAMScan	RateHorizontal: 	15	kHz	to	100	kHz	(RGB: 	24	kHz	or	over)Vertical:	50	Hz	to	120	Hz	(HDMI: 	50	Hz	to	85	Hz)
*5	 HDMI®	(Deep	Color,	LipSync,	3D)	with	HDCP	 What	is	HDCP/HDCP	technology?	 HDCP	is 	an 	acronym 	for 	High-bandwidth 	Digital 	Content 	Protection. 	High 	bandwidth 	Digital 	Content 	Protection 	(HDCP) 	is 	a 	system	for	preventing	illegal	copying	of	video	data	sent	over	a	High-Definition	Multimedia	Interface	(HDMI).	 If	 you	are	unable	 to	view	 material	 via	the	 HDMI	 input,	this	does	 not	necessarily	 mean	the	projector	 is	not	 functioning	 properly.	With	the	 implementation	 of	HDCP,	 there	may	be	cases	 in	which	 certain	 content	 is	protected	 with	HDCP	 and	might	 not	be	displayed	due	to	the	decision/intention	of	the	HDCP	community	(Digital	Content	Protection,	LLC).	 Video: 	Deep	Color; 	8/10/12-bit,	LipSync	 Audio:	LPCM;	up	to	2	ch,	sample	rate	32/44.1/48	KHz,	sample	bit; 	16/20/24-bit*6	 An	image	 with	higher	 or	lower	 resolution	 than	the	projector’s	 native	resolution	 (M333XS:	1024	 ×	768	 /	M353WS/M303WS: 	1280	×	800)	will	be	displayed	with	Advanced	AccuBlend. 
						

							142
8. Appendix
Model NumberNP-M353WSNP-M303WS NP-M333XSSync	CompatibilitySeparate	SyncBuilt-in	Speaker20	W	(monaural)Power	Requirement100–240V	AC,	50/60HzInput	Current3.9-1.6A 3.3-1.4A3.9-1.6APower	Consump-
tion
(Typical	value)
ECO	MODE	OFF
338W	(100-130V)320W	(200-240V)283W	(100-130V)269W	(200-240V)338W	(100-130V)320W	(200-240V)
NORMAL276W	(100-130V)264W	(200-240V)218W	(100-130V)208W	(200-240V)276W	(100-130V)264W	(200-240V)ECO221W	(100-130V)210W	(200-240V)186W	(100-130V)179W	(200-240V)221W	(100-130V)210W	(200-240V)STANDBY	(NETWORK	STANDBY)
2.6	W(100-130V)/2.9	 W	(200-240V)
STANDBY	(NORMAL)0.15W	(100-130V)/0.32W	(200-240V)
Mechanical
Model NumberNP-M353WS NP-M303WS NP-M333XS
Installation
OrientationDesktop/Front,	Desktop/Rear,	Ceiling/Front,	Ceiling/Rear
Dimensions14.5"	(W)	×	3.9"	(H)	×	11.3"	(D)	/368	mm	(W)	×	98	mm	(H)	×	286	mm	(D)	(not	including	protrusions)WeightM353WS/M333XS: 	8.2	lbs/3.7	kgM303WS:	8.0	lbs/3.6	kgEnvironmental	ConsiderationsOperational	 Temperatures	: 	41°	to	104°F	(5°	to	40°C),	(ECO	mode	selected	automatically	at	95°F	to	104°F/35°C	to	40°C)	20%	to	80%	humidity	(non-condensing)	Storage	Temperatures	: 	14°	to	122°F	(-10°	to	50°C),	20%	to	80%	humidity	(non-condensing)Operating	altitude: 	0	to	2400m/8000	feet	(Set	[FAN	MODE]	to	[HIGH	ALUTITUDE]	when	using	the	pro-jector	at	altitudes	approximately	1700	meters	/5500	feet)RegulationsUL/C-UL	Approved	(UL	60950-1,	CSA	60950-1)Meets	DOC	Canada	Class	B	requirementsMeets	FCC	Class	B	requirementsMeets	AS/NZS	CISPR.22	Class	BMeets	EMC	Directive	(EN55022,	EN55024,	EN61000-3-2,	EN61000-3-3) 
						

							143
8. Appendix
[M403H/M323H]
Optical
Model NumberNP-M403HNP-M323H
Projection 
System Single DLP® chip (0.65", aspect 16:9)
Resolution*
11920 X 1080 pixels (Full HD)
Lens Manual zoom and focus
Zoom Ratio = 1.7
F=2.4 - 3.2, f=18.0 - 30.6mm
Lamp 270 W AC 
(219 W in NORMAL)
(162 W in ECO)
Light Output*
2*34000 lumens 3200 lumens
NORMAL: 81%
ECO: 60%*
4
Contrast Ratio*3
(full white: full 
black) 10000:1 with DYNAMIC CONTRAST ON
8000:1 with DYNAMIC CONTRAST ON
Image Size 
(Diagonal) 30–300 inches/0.76 m–7.6 m (16:9)
Projection 
Distance
(Min.–Max.) 29"-319" (wide) / 52"-554" (tele)
0.75m-8.10m (wide) / 1.32m-14.08m (tele)
Projection Angle 16.9°-17.9° (wide) / 9.9°-10.2° (tele)
*1	 Effective	pixels	are	more	than	99.99%.*2	 This	is	the	 light	 output	 value	(lumens)	 when	the	[PRESET]	 mode	is	set	 to	[HIGH-BRIGHT]. 	If	 any	 other	 mode	 is	selected	 as	the	[PRESET]	mode,	the	light	output	value	may	drop	slightly.*3	 Compliance	with	ISO21118-2012*4	The	maximum	power	becomes	equivalent	to	power	in	ECO	(ECO	MODE).
Electrical
Model NumberNP-M403H NP-M323H
Inputs 1 × RGB/Component (D-Sub 15 P), 2 × HDMI Type A (19P, HDMI® Terminal) HDCP supported*5, 
1 × Video (RCA), 1 × (L/R) RCA Audio, 1 × Stereo Mini Audio
Outputs 1 × RGB (D-Sub 15P), 1 × Stereo Mini Audio
PC Control 1 × PC Control Port (D-Sub 9P)
Wired LAN Port 1 × RJ-45 (10BASE-T/100BASE-TX)
Wireless LAN 
Port (Optional) IEEE 802.11 b/g/n (optional USB Wireless LAN Unit  required)
USB Port 1 × Type A, 1 × Type B
MIC Input 1 × Monaural Mini Audio
Color Reproduc-
tion 10-bit signal processing (1.07 billion colors) (USB-A, LAN: 16.7 million colors)
Compatible 
Signals*
6Analog: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/UXGA/WSXGA+/HD/Full HD/WUXGA/Mac13"/Mac16"/Mac 19"/Mac 21"/Mac 23"Component: 480i/480p/720p/1080i (60Hz), 576i/576p/1080i (50Hz), DVD Progressive (50/60Hz)Digital: VGA/SVGA/XGA/WXGA/Quad-VGA/SXGA/SXGA+/WXGA+/WXGA++/WSXGA+/HDTV (1080p)/HDTV (1080i)/HDTV (720p)/SDTV(480p)/SDTV(576p)/SDTV(480i)/SDTV(576i)3D: For PC XGA/1280 × 720/WXGA, For Video SDTV (480i), For HDMI-1.4a 720p (Frame Packing)/ 1080p (Frame Packing)/1080i (Side by Side (Half))/720p (Top and Bottom)/1080p (Top and Bottom)
*5	 HDMI®	(Deep	Color,	LipSync,	3D)	with	HDCP	 What	is	HDCP/HDCP	technology?	 HDCP 	is 	an 	acronym 	for 	High-bandwidth 	Digital 	Content 	Protection. 	High 	bandwidth 	Digital 	Content 	Protection 	(HDCP) 	is 	a 	system	for	preventing	illegal	copying	of	video	data	sent	over	a	High-Definition	Multimedia	Interface	(HDMI).	 If	 you	are	unable	 to	view	 material	 via	the	 HDMI	 input,	this	does	 not	necessarily	 mean	the	projector	 is	not	 functioning	 properly.	With	the	 implementation	 of	HDCP,	 there	may	be	cases	 in	which	 certain	 content	 is	protected	 with	HDCP	 and	might	 not	be	displayed	due	to	the	decision/intention	of	the	HDCP	community	(Digital	Content	Protection,	LLC).	 Video: 	Deep	Color; 	8/10/12-bit,	LipSync	 Audio:	LPCM;	up	to	2	ch,	sample	rate	32/44.1/48	KHz,	sample	bit; 	16/20/24-bit*6	 An	image	 with	higher	 or	lower	 resolution	 than	the	projector’s	 native	resolution	 (1920	×	1080)	 will	be	displayed	 with	Advanced	AccuBlend. 
						

							144
8. Appendix
Model NumberNP-M403HNP-M323H
Horizontal 
Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz (HDMI: 50 Hz to 85 Hz)
Sync Compat-
ibility Separate Sync
Built-in Speaker 20 W (monaural)
Power Require-
ment 100–240 V AC, 50/60Hz
Input Current 3.9 - 1.6 A
Power 
Consump-
tion
(Typical 
value)ECO MODE 
OFF338W (100-130 V)
320W (200-240 V)
NORMAL276W (100-130 V)
264W (200-240 V)
ECO221W (100-130 V)
210W (200-240 V)
STANDBY 
(NETWORK 
STANDBY)2.6W (100-130 V)/ 2.9W (200-240 V)
STANDBY 
(NORMAL)0.15W (100-130 V)/0.32W (200-240 V)
Mechanical
Model NumberNP-M403H
NP-M323H
Installation
Orientation Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 14.5" (W) × 3.9" (H) × 11.3" (D) /368 mm (W) × 97.5 mm \
(H) × 286 mm (D) 
(not including protrusions)
Weight 8.2 lbs (3.7 kg)
Environmental 
Considerations Operational Temperatures : 41° to 104°F (5° to 40°C), 
(ECO mode selected automatically at 95°F to 104°F/35°C to 40°C) 
20% to 80% humidity (non-condensing) 
Storage Temperatures : 14° to 122°F (-10° to 50°C), 
20% to 80% humidity (non-condensing)
Operating altitude: 0 to 2400 m/8000 feet (Set [FAN MODE] to [HIGH ALUTITUDE] when using the projector at altitudes approximately 
1700 meters /5500 feet)
Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
For	additional	information	visit:
US	:	http://www.necdisplay.com/
Europe	: 	http://www.nec-display-solutions.com/
Global	:	http://www.nec-display.com/global/index.html
For	information	on	our	optional	accessories,	visit	our	website	or	see	our	brochure.
The	specifications	are	subject	to	change	without	notice. 
						

							145
8. Appendix
368 (14.5)
291 (11.46)
107.5 (4.23)
130 (5.12) 150 (5.91)
200 (7.87)
175 (6.89)
98 (3.9)
108 (4.3)
80 (3.15)
❸ Cabinet Dimensions
[M403W/M363W/M323W/M403X/M363X/M323X/M283X/M403H/M323H]
Lens center
Lens center
Holes for ceiling mount
Unit:	mm	(inch) 
						

							146
8. Appendix
368 (14.5)
286(11.3)
134 (5.3)
130 (5.2) 150 (5.9)
200 (7.9)
175 (6.9)
98 (3.9)
80 (3.2)
108 (4.3)
291 (11.5)
[M353WS/M303WS/M333XS]
Lens center
Lens center
Holes for ceiling mount
Unit:	mm	(inch) 
						

							147
8. Appendix
Attaching the Optional Cable Cover (NP05CV)
An	optional	cable	cover	(NP05CV)	is	available	for	hiding	cables.
 CAUTION:
•	 Be	sure	to	tighten	 the	screws	 after	attaching	 the	cable	 cover.	Failure	 to	do	 so	may	 cause	 the	cable	 cover	 to	come	
off	and	fall,	resulting	in	injury	or	damage	to	the	cable	cover.
•	 Do	not	put	bundled	cables	in	the	cable	cover. 	Failure	to	do	so	may	damage	the	power	cord,	resulting	a	fire.
•	 Do	not	force	 excessive	 pressure	to	the	 cable	 cover.	Doing	 so	may	 cause	 damage	 to	the	 cable	 cover,	 resulting	
in	injury.
Attaching the cable cover
Attach	the	cable	cover	after	installing	the	projector	on	the	ceiling	and	connecting	cables.
Tool	needed	for	attaching:
•	 Phillips	screwdriver	(plus-head)
1.	 Align	two	tabs	on	the	outside	of	the	cable	cover	with	grooves	of	the	projector	and	push	the	top	end.
•	 At	the	same	 time	two	tabs	 on	the	 inside	 of	the	 cable	 cover	 will	be	engaged	 in	the	 responding	 grooves	of	the	
projector.
NOTE:
•	 Be	careful	not	to	get	cables	caught	in	between	the	cable	cover	and	the	 projector.
2.	 Tighten	the	cable	cover	screws.
•	 Be	sure	to	tighten	the	screws.
1
12
2
Removing the cable cover
1.	 Loosen	the	cable	cover	screws	until	the	Phillips	screwdriver	goes	into	a	freewheeling	condition
 
1
1
2.	 Remove	the	cable	cover.
 Push up the cable cover slightly and rotate it to release. 
						

							148
8. Appendix
❹ Pin Assignments of D-Sub COMPUTER Input Terminal
Mini D-Sub 15 Pin Terminal
Signal	Level
Video	signal	:	0.7Vp-p	(Analog)
Sync	signal	:	TTL	level
5
14 23 10
11 12 13 14 15
69 78
Pin No. RGB	Signal	(Analog)YCbCr Signal
1 Red Cr
2
Green	or	Sync	on	GreenY
3 Blue Cb
4 Ground
5 Ground
6
Red	GroundCr	Ground7Green	GroundY	Ground8Blue	GroundCb	Ground9Hot	plug10Sync	Signal	Ground11No	Connection12Bi-directional	DATA	(SDA)13Horizontal	Sync	or	Composite	
Sync
14Vertical	Sync15Data	Clock
COMPUTER IN
NOTE:	Pin	Nos.	12	and	15	are	required	for	DDC/CI. 	 
						

							149
8. Appendix
❺ Compatible Input Signal List
Analog RGB
SignalResolution	(dots)Aspect	RatioRefresh	Rate	(Hz)VGA640×480 4:360/72/75/85
SVGA 800×600 4:356/60/72/75/85
XGA 1024×768 *
14:3 60/70/75/85
WXGA 1280×768 *215:9 60
1280 ×800 *216:10 60
1360 ×768 *316:9 60
1366 ×768 *316:9 60
Quad-VGA 1280×960 4:3 60/75
SXGA 1280×1024 5:4 60/75
SXGA+ 1400×1050 4:3 60
WXGA+ 1440×900 16:10 60
WXGA++ 1600×900 *
316:9 60
UXGA 1600×1200 *44:3 60
WSXGA+ 1680×1050 16:10 60
HD 1280×720 16:9 60
Full	HD1920×1080 16:9 60
WUXGA 1920×1200 *516:10 60MAC	13"640×480 4:3 67MAC	16"832×624 4:3 75MAC	19"1024×768 4:3 75MAC	21"1152×870 4:3 75MAC	23"1280×1024 5:4 65
Component
SignalResolution	(dots)Aspect	RatioRefresh	Rate	(Hz)HDTV	(1080p)1920×1080 *616:9 50/60HDTV	(1080i)1920×1080 *616:9 50/60HDTV	(720p)1280×720 16:9 50/60SDTV	(480p)720×480 4:3/16:9 60SDTV	(576p)720×576 4:3/16:9 50SDTV	(480i)720×480 4:3/16:9 60SDTV	(576i)720×576 4:3/16:9 50
Composite	Video
SignalAspect	RatioRefresh	Rate	(Hz)NTSC 4:360
PAL 4:350
PAL60 4:360
SECAM 4:350
HDMI
SignalResolution	(dots)Aspect	RatioRefresh	Rate	(Hz)VGA 640×480 4:3 60
SVGA 800×600 4:3 60
XGA 1024×768 *
14:3 60
WXGA 1280×768 *215:9 60
1280 ×800 *216:10 60
1366 ×768 16:9 60
Quad-VGA 1280×960 4:3 60
SXGA 1280×1024 5:4 60
SXGA+ 1400×1050 4:3 60
WXGA+ 1440×900 16:10 60
WXGA++ 1600×900 16:9 60
WSXGA+ 1680×1050 16:10 60
HDTV	(1080p)1920×1080 *616:9 50/60HDTV	(1080i)1920×1080 *616:9 50/60HDTV	(720p)1280×720 16:9 50/60SDTV	(480p)720×480 4:3/16:9 60SDTV	(576p)720×576 4:3/16:9 50SDTV	(480i)720	(1440)×
480 4:3/16:9 60SDTV	(576i)720	(1440)×
576 4:3/16:9 50
3D
SignalResolution	(dots)Aspect	RatioRefresh	Rate	(Hz)For	PC	Signal*7
XGA1024×768 4:360*8/120*9
HD 1280×720 16:9 60*8/120*9
WXGA 1280×800 16:10 60*8/120*9
HDTV	(1080p)1920×1080 16:9 60For	Video	Signal*10
SDTV	(480i)720 ×480 4:3/16:9 60
HDMI 3D
SignalResolution	(dots)Aspect	RatioRefresh	Rate	(Hz)Structure:	Frame	Packing1080p 1920×1080 16:9 23.98/24
720p 1280×720 16:9 50/59.94/60
Structure:	Side	by	Side	(Half)1080i 1920×1080 16:950/59.94/60Structure:	Top	and	Bottom1080p 1920×1080 16:9 23.98/24
720p 1280×720 16:9 50/59.94/60
*1	Native	resolution 	on 	XGA 	model 	(M403X/M363X/M323X/M283X/M333XS)	*2	Native 	resolution 	on 	WXGA 	model 	(M403W/M363W/M323W/M353WS/M303WS)*3	The	 projector	 may	fail	to	display	 these	signals	 correctly	 when	[AUTO]	is	selected	for	[ASPECT	RATIO]	in	the	on-screen	menu.	 The	 factory	 default	is	[AUTO]	 for	[ASPECT	 RATIO].	To	 display	 these	signals,	select	[16:9]	for	[ASPECT	RATIO].
*4	 WXGA	MODE: 	OFF*5	 WXGA	MODE:	ON*6	 Native	resolution	on	M403H/M323H*7:	 HDMI	signals	are	included.*8	 60	Hz 	signals 	are 	supported 	for 	Side 	by 	Side, 	Top 	and 	Bottom, 	and 	Frame	Sequential.*9	 120Hz	signals	are	supported	for	Frame	Sequential	only.*10	Video	signal	(SDTV	480i)	is	supported	for	Frame	Sequential	only.
NOTE:
•	 An 	image 	with 	higher 	or 	lower 	resolution 	than 	the 	projector’s 	native 	resolution 	(M403X/M363X/M323X/M283X/M333XS: 	1024 	×	
768 	/	 M403W/M363W/M323W/M353WS/M303WS: 	1280 	× 	800 	/	 M403H/M323H: 	1920 	× 	1080) 	will 	be 	displayed 	with 	Advanced	
AccuBlend.
•	 Sync	on	Green	and	Composite	sync	signals	are	not	supported.
•	 Signals	 other	than	those	 specified	 in	the	 table	 above	 may	not	be	displayed	 correctly.	If	this	 should	 happen,	 change	the	refresh	
rate	or	resolution	on	your	PC.	Refer	to	Display	Properties	help	section	of	your	PC	for	procedures.