NEC Projector M323W User Manual

120
6. Installation and Connections
B
D
Cα
Throw Distance and Screen Size
The	
following	 shows	the	proper	 relative	 positions	 of	the	 projector	 and	screen. 	Refer	 to	the	 table	 to	determine	 the	
position	of	installation.
Distance Chart
B	=	 Vertical 	distance 	between 	lens 	center 	and	
screen center
C	=	 Throw	distance
D	=	 Vertical 	distance 	between 	lens 	center 	and	
screen	 bottom	 (top	of	screen	 for	ceiling	 ap-
plication)
α
	=	 Throw	angle
NOTE:	 The	values	 in	the	 tables	 are	design...

121
6. Installation and Connections
[M403H/M323H]
Screen SizeBC
Dα
Diagonal WidthHeight widetele widetele
inch mminch mminch mminch mminchmm -inch mminch mmdegree -
degree
30 762 26664 15374
9�7 246�4 29 744  52 1324 2�3 59�6 17�910�2401016 35886 2049812�9 328�6 40 1017  71 1796 3�1 79�5 17�610�1601524 521328 2974719�4 492�9 61 1562  108 2742 4�7 119�3 17�310�0802032 701771 3999625�9 657�2 83 2107  145 3687 6�3 159�1 17�210�0902286 781992 44112129�1 739�3 94 2379  164 4159 7�0 178�9 17�110�01002540...

122
6. Installation and Connections
HDMI 2 IN
HDMI 1 IN
COMPUTER IN
USB-B
AUDIO IN
Computer cable (VGA) (supplied)To mini D-Sub 15-pin terminal on the	projector. 	It	is	recommended	that you use a commercially 
available distribution amplifier if 
connecting a signal cable longer 
than the cable supplied.
NOTE:	For 	Mac, 	use 	a 	commercially	
available	 pin	adapter	 (not	sup-
plied) 	to 	connect 	to 	your 	Mac’s	
video	port.
A commercially available USB cable 
(compatible with USB 2.0 specifications)...

123
6. Installation and Connections
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	IN	COMPUTER(COMP1)
HDMI	1	IN	HDMI1HDMI1
HDMI	2	IN	HDMI2HDMI2
USB-B
	USB-B(USB-B)
NOTE:	The	projector	is	not	compatible	with	video	decoded	outputs	of	the	NEC	ISS-6020	switcher.
NOTE:	An	image	may	not	be	displayed	correctly	when	a	Video	source	is	played	back	via	a	commercially	available...

124
6. Installation and Connections
Connecting an External Monitor
You	can	connect	 a	separate,	 external	monitor	to	your	 projector	 to	simultaneously	 view	on	a	monitor	 the	computer	
analog	image	you’re	projecting.
NOTE:
•	 The	AUDIO	OUT	mini	jack	does	not	support	Headphone	terminal.
•	 Daisy	chain	connection	is	not	possible.
•	 When	audio	equipment	is	connected,	the	projector	speaker	is	disabled.
Monitor	out	and	sleep	mode:
•	 The	MONITOR	OUT	(COMP.)	terminal	will	not	work	when	[NORMAL]	is	selected...

125
6. Installation and Connections
Connecting Your DVD Player or Other AV Equipment
Connecting	Video	Input
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
VIDEO	IN	VIDEO(VIDEO)
NOTE:	The	AUDIO	IN	L	and	R	jacks	(RCA)	are	shared	between	the	Video	inputs.
NOTE:	Refer	to	your	VCR	owner’s	manual	for	more	information	about	your	equipment’s	video	output	requirements.
NOTE:	 An	image...

126
6. Installation and Connections
Connecting Component Input
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	IN	COMPUTER(COMP1)
NOTE:	Refer	to	your	DVD	player’s	owner’s	manual	for	more	information	about	your	DVD	player’s	video	output	requirements.
COMPUTER IN
AUDIO IN
Audio cable (not supplied)
15-pin - to - RCA (fe-
male) × 3 cable adapter 
(ADP-CV1E)
Stereo mini plug...

127
6. Installation and Connections
HDMI 2 IN
HDMI 1 IN
Connecting HDMI Input
You	
can	connect	 the	HDMI	 output	 of	your	 DVD	 player,	 hard	disk	player,	 Blu-ray	 player,	or	notebook	 type	PC	to	the	
HDMI	IN	terminal	of	your	projector.
NOTE:	The	HDMI	IN	terminal	supports	Plug	&	Play	(DDC2B).
Audio cable (not supplied)
HDMI	cable	(not	supplied)Use	High	Speed	HDMI® Cable.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
HDMI	1	IN	HDMI1HDMI1
HDMI	2	IN	HDMI2HDMI2
TIP:	For...

128
6. Installation and Connections
Connecting to a Wired LAN
The	projector	comes	standard	with	a	LAN	port	(RJ-45)	which	provides	a	LAN	connection	using	a	LAN	cable.	
To	use	 a	LAN	 connection,	 you	are	required	 to	set	 the	 LAN	 on	the	 projector	 menu.		Select	 [SETUP]	→	[WIRED	 LAN].	
(→	page	109).
Example of LAN connection
Example	of	wired	LAN	connectionServer
Hub
LAN cable (not supplied)
NOTE:	 Use	a	Category	 5	or	 higher	
LAN	cable. 

129
6. Installation and Connections
Connecting to a Wireless LAN
The	USB	 Wireless	 LAN	Unit	also	 provides	 a	wireless	 LAN	connection. 	To	 use	 a	wireless	 LAN	connection,	 you	are	
required	to	assign	an	IP	address	to	the	projector.
Important:
•	 If	 you	use	 the	projector	 with	the	USB	 Wireless	 LAN	Unit	in	the	 area	 where	 the	use	 of	wireless	 LAN	equipment	 is	
prohibited,	remove	the	USB	 Wireless	LAN	Unit	from	the	projector.
•	 Buy	the	appropriate	USB	 Wireless	LAN	Unit	for	your	country	or...