NEC Projector M283X User Manual
Have a look at the manual NEC Projector M283X User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
80 4. Using the Viewer Slide toolbar MenuOptionsDescription (1) DisplayCloses the menu and switches to the slide screen. Closes the menu and displays the thumbnail screen. Closes the menu and starts the slideshow from the highlighted item. (2) Image display Closes the menu and displays the image in its actual size. Closes the menu and displays the image in the projector’s maximum reso- lution. (3) Clockwise rotation —Close the menu and rotate the image 90°clockwise (4) Counter- clockwise rotation —Close the menu and rotate the image 90°counter clockwise Slideshow toolbar MenuOptions Description (1) Stop—Closes the menu and changes to the slide screen. (2) Back—Goes back to the previous image. (3) Forward—Goes to the next image. (4) IntervalSpecifies interval time when playing back the slides. (5) RepeatRepeats to play back the images in the folder. Returns to the thumbnail screen. TIP: • A picture icon at the center of the screen shows that the file cannot be displayed in the slide screen or thumbnail screen. • Slide toolbar setting for rotation will be cancelled if the folder is moved from one place to another. (1)(2)(3)(4) (1)(2) (3)(4)(5)
81 5. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶ in the bottom show available buttons for your operation. 2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu. 3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab. 4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or set. You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want. 5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window. 6. Adjust the level or turn the selected item on or off by using the ▲▼◀▶ buttons on the remote control or the projector cabinet. Changes are stored until adjusted again. 7. Repeat steps 2 -6 to adjust an additional item, or press the EXIT button on the remote control or the projec- tor cabinet to quit the menu display. NOTE: When a menu or message is displayed, several lines of information may be lost, depending on the signal or settings. 8. Press the MENU button to close the menu. To return to the previous menu, press the EXIT button.
82 5. Using On-Screen Menu ❷ Menu Elements Slide barSolid triangleTab Radio button High Altitude symbol ECO mode symbol Wireless symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item� Solid triangle ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front� Radio button �����������������������Use this round button to select an option in a dialog box� Source ��������������������������������Indicates the currently selected source� Off Timer remaining time ����Indicates the remaining countdown time when the [OFF TIMER] is preset� Slide bar �����������������������������Indicates settings or the direction of adjustment� ECO mode symbol ��������������Indicates ECO MODE is set� Key Lock symbol ����������������Indicates the [CONTROL PANEL LOCK] is enabled� Thermometer symbol ���������Indicates the [ECO MODE] is forcibly set to [ON] mode because the internal temperature is too high� High Altitude symbol ����������Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode� Wireless symbol �����������������Indicate the wireless LAN connection is enabled� Source Available buttons Thermometer symbol Key Lock symbol Off Timer remaining time Highlight
83 5. Using On-Screen Menu ❸ List of Menu Items Some menu items are not available depending on the input source. Menu ItemDefaultOptions SOURCE COMPUTER * HDMI1 * HDMI2 * VIDEO * USB-A * LAN * USB-B * ADJUST PICTUREPRESET *1–8 DETAIL SETTINGS REFERENCE * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, NATURAL, DICOM SIM.GAMMA CORRECTION*1DYNAMIC, NATURAL, BLACK DETAIL SCREEN SIZE*2*LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*5000, 6500, 7800, 9300 COLOR ENHANCEMENT*OFF, LOW, MEDIUM, HIGH DYNAMIC CONTRAST*OFF, ON CONTRAST 64 BRIGHTNESS 64 SHARPNESS 8 COLOR 64 HUE 32 RESET IMAGE OPTIONS CLOCK * PHASE * HORIZONTAL * VERTICAL * OVERSCAN AUTO AUTO, OFF, ON ASPECT RATIO*M403X/M363X/M323X/M283X/M333XS: AUTO, 4:3, 16:9, 15:9, 16:10, WIDE ZOOM, NATIVE *M403W/M363W/M323W/M353WS/M303WS/M403H/M323H: AUTO, 4:3, 16:9, 15:9, 16:10, LETTERBOX, NATIVEPOSITION (Not available on M403W/M363W/M323W/M353WS/M303WS/ M403H/M323H)0−16 to 16 NOISE REDUCTIONOFFOFF, LOW, MEDIUM, HIGHTELECINE2-2/2-3 AUTOOFF, 2-2/2-3 AUTO, 2-2 ON, 2-3 ON SETUP GENERAL DIGITAL ZOOM (M353WS/M303WS/M333XS) 100 80 to 100AUTO KEYSTONE (VERTICAL only)ONOFF, ON KEYSTONE 0HORIZONTAL*3VERTICALKEYSTONE SAVEOFFOFF, ON WALL COLOROFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT BLUE, LIGHT ROSE ECO SETTINGS ECO MODEAUTO ECOOFF, AUTO ECO, NORMAL, ECOAUTO ECO OPTIONSAUTO DIMOFFOFF, 0:01, 0:03, 0:10, 0:20ROOM LIGHT SENSING OFFOFF, ON NORMAL OPTIONCONSTANT BRIGHTNESSOFFOFF, ON ECO OPTIONCONSTANT BRIGHTNESSOFFOFF, ON CLOSED CAPTIONOFFOFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4OFF TIMEROFFOFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00 * The asterisk (*) indicates that the default setting varies depending on the signal.*1 The [GAMMA CORRECTION] item is available when an item other than [DICOM SIM.] is selected for [REFERENCE].*2 The [SCREEN SIZE] item is available when [DICOM SIM.] is selected for [REFERENCE].*3 The [HORIZONTAL] item is not available on M353WS, M303WS, and M333XS.
84 5. Using On-Screen Menu Menu ItemDefaultOptions SETUP GENERAL LANGUAGE ENGLISHENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어 ROMÂNĂ, HRVATSKI, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย, , 繁體中文, TIẾNG ViỆT MENUCOLOR SELECTCOLORCOLOR, MONOCHROMESOURCE DISPLAYONOFF, ONID DISPLAYONOFF, ONECO MESSAGEOFFOFF, ONDISPLAY TIMEAUTO 45 SECMANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SECBACKGROUND BLUEBLUE, BLACK, LOGO3D CAUTION MESSAGEONOFF, ON INSTALLATIONORIENTATION DESKTOP FRONTDESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONTCONTROL PANEL LOCKOFFOFF, ONSECURITY OFFOFF, ONCOMMUNICATION SPEED38400bps4800bps, 9600bps, 19200bps, 38400bps CONTROL IDCONTROL ID NUMBER1 1 to 254CONTROL IDOFFOFF, ONTEST PATTERNCROSS HATCHMIC SELECTDYNAMIC MICDYNAMIC MIC, CONDENSER MICMIC GAIN20 to 15 OPTIONS(1)FAN MODEAUTOAUTO, HIGH, HIGH ALTITUDE COLOR SYSTEMVIDEO AUTOAUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM WXGA MODE M403X/M363X/ M323X/M283X/ M333XS/M403H/ M323H: OFF M403W/M363W/ M323W/M353WS/ M303WS: ON OFF, ON HDMI SETTINGS HDMI1VIDEO LEVELNORMALAUTO, NORMAL, ENHANCEDHDMI2VIDEO LEVELNORMALAUTO, NORMAL, ENHANCED AUDIO SELECT HDMI1 HDMI1HDMI1, COMPUTERHDMI2HDMI2HDMI2, COMPUTERLAN LANLAN, COMPUTERUSB BUSB BUSB B, COMPUTERBEEP ONOFF, ON OPTIONS(2) STANDBY MODENORMALNORMAL, NETWORK STANDBYDIRECT POWER ONOFFOFF, ONAUTO POWER ON(COMP.)OFFOFF, ONAUTO POWER OFF*1:00OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00 DEFAULT SOURCE SELECTLASTLAST, AUTO, COMPUTER, HDMI1, HDMI2, VIDEO, USB-A, LAN, USB-BCARBON CONVERT0.505 CURRENCY $$, €, JP¥, RMB¥CURRENCY CONVERT 3D COMPUTER 3D OFF OFF, ONGLASSESDLP® LinkDLP® Link, OTHERSFORMATSIDE BY SIDESIDE BY SIDE, TOP AND BOTTOM, FRAME SEQUENTIALL/R INVERTNON-INVERTNON-INVERT, INVERT HDMI1 3D OFF OFF, ONGLASSESDLP® LinkDLP® Link, OTHERS FORMAT AUTOAUTO, FRAME PACKING, SIDE BY SIDE, TOP AND BOTTOML/R INVERTNON-INVERTNON-INVERT, INVERT HDMI23D OFF OFF, ONGLASSESDLP® LinkDLP® Link, OTHERS FORMAT AUTOAUTO, FRAME PACKING, SIDE BY SIDE, TOP AND BOTTOML/R INVERTNON-INVERTNON-INVERT, INVERT VIDEO3D OFFOFF, ONGLASSESDLP® LinkDLP® Link, OTHERSL/R INVERTNON-INVERTNON-INVERT, INVERT WIRED LAN WIRED LANENABLEDISABLE, ENABLE SETTINGSDHCP: ONAUTO DNS: OFFDHCP, IP ADDRESS, SUBNET MASK, GATEWAY, AUTO DNS, DNSRECONNECT WIRELESS LANPROFILE DISABLEDISABLE, SIMPLE ACCESS POINT, PROFILE1, PROFILE2RECONNECT *AUTO POWER OFF: This item can be selected only when [NORMAL] is selected for [STANDBY MODE].
85 5. Using On-Screen Menu Menu ItemDefaultOptions INFO. USAGE TIME LAMP LIFE REMAININGLAMP HOURS USEDTOTAL CARBON SAVINGSTOTAL COST SAVINGS SOURCE(1) RESOLUTION HORIZONTAL FREQUENCYVERTICAL FREQUENCYSYNC TYPESYNC POLARITYSCAN TYPE SOURCE(2) SIGNAL TYPEVIDEO TYPEBIT DEPTHVIDEO LEVEL3D SIGNAL WIRED LAN IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS WIRELESS LAN IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESSSSIDNETWORK TYPESECURITY CHANNEL SIGNAL LEVEL VERSION(1) FIRMWARE D ATA VERSION(2) FIRMWARE2 OTHERS PROJECTOR NAMEHOST NAMEMODEL NO.SERIAL NUMBERLAN UNIT TYPECONTROL ID (when [CONTROL ID] is set) RESETCURRENT SIGNALALL DATACLEAR LAMP HOURS
86 5. Using On-Screen Menu ❹ Menu Descriptions & Functions [SOURCE] COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER] respectively. HDMI1 and 2 Selects the HDMI compatible equipment connected to your HDMI 1 or HDMI 2 IN terminal. VIDEO Selects what is connected to your VIDEO input-VCR, DVD player or document camera. USB-A (Viewer) This feature enables you to make presentations using a USB memory that contains slides. (→ page 73 “4. Using the Viewer”) LAN Selects a signal from the LAN port (RJ-45) or the installed USB wireless LAN unit (optional). USB-B (USB Display) Selects the computer connected to the USB-B port (type B) by using a commercially available USB cable. (→ page 43)
87 5. Using On-Screen Menu ❺ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are seven factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 7]. HIGH-BRIGHT ��������Recommended for use in a brightly lit room� PRESENTATION �����Recommended for making a presentation using a PowerPoint file� VIDEO ��������������������Recommended for typical TV program viewing� MOVIE �������������������Recommended for movies� GRAPHIC ���������������Recommended for graphics� sRGB ���������������������Standard color values NATURAL ���������������Well-balanced brightness and color setting� DICOM SIM� ����������Recommended for DICOM simulation format� NOTE: • The [DICOM SIM.] option is for training/reference only and should not be used for actual diagnosis. • DICOM stands for Digital Imaging and Communications in Medicine. It is a standard developed by the American College of Radiol- ogy (ACR) and the National Electrical Manufacturers Association (NEMA). The standard specifies how digital image data can be moved from system to system. • Screen flicker may happen depending on the projected image. To avoid this, from the on-screen menu select [ADJUST] → [PIC- TURE] → [PRESET] and set to one of the items other than [HIGH-BRIGHT] and [PRESENTATION]. [DETAIL SETTINGS]
88 5. Using On-Screen Menu Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 7]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION], [SCREEN SIZE], [COLOR TEMPERATURE], [COLOR ENHANCEMENT], and [DYNAMIC CONTRAST]. HIGH-BRIGHT ��������Recommended for use in a brightly lit room� PRESENTATION �����Recommended for making a presentation using a PowerPoint file� VIDEO ��������������������Recommended for typical TV program viewing� MOVIE �������������������Recommended for movies� GRAPHIC ���������������Recommended for graphics� sRGB ���������������������Standard color values� NATURAL ���������������Well-balanced brightness and color setting� DICOM SIM� ����������Recommended for DICOM simulation format� Selecting Gamma Correction Mode [GAMMA CORRECTION] Each mode is recommended for: DYNAMIC ��������������Creates a high-contrast picture� NATURAL ���������������Natural reproduction of the picture� BLACK DETAIL �������Emphasizes detail in dark areas of the picture� NOTE: This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS]. Selecting Screen Size for DICOM SIM [SCREEN SIZE] This function will perform gamma correction appropriate for the screen size. LARGE �������������������For screen size of 150" MEDIUM ����������������For screen size of 100" SMALL �������������������For screen size of 50" NOTE: This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS]. Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice. NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available. Enhancing the Color [COLOR ENHANCEMENT] This function allows you to adjust the color density of the image. The color of the image will become deeper in the order of “LOW”, “MEDIUM” and “HIGH” as the image will become darker. With [OFF] selected, the COLOR ENHANCEMENT function will not work. Adjusting Brightness and Contrast [DYNAMIC CONTRAST] This function allows you to adjust the contrast ratio optically. To increase the contrast ratio, select [ON]. NOTE: • The [DYNMIC CONTRAST] item cannot be selected in the following cases: - When [CONSTANT BRIGHTNESS] is enabled with [ON] selected for [ECO MODE] from [ECO SETTINGS]. - When [ON] is selected for [3D] while images are projected. • The ECO MODE and DYNAMIC CONTRAST features control the lamp power. Some pictures may become extremely bright when using both ECO MODE and DYNAMIC CONTRAST features to control the lamp power. To avoid this phenomena, turn off the ECO MODE and DYNAMIC CONTRAST.
89 5. Using On-Screen Menu [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/− green to +/− blue. The red level is used as reference. Input signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE COMPUTER/HDMI (RGB)YesYesYes NoNo COMPUTER/HDMI (COMPONENT)YesYesYesYesYes VIDEO/COMPONENT YesYesYesYesYes USB-A/LAN/USB-B YesYesYes NoNo Yes = Adjustable, No = Not adjustable [RESET] The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following; Preset numbers and [REFERENCE] within the [PRESET] screen. The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected will not be reset.