NEC Projector M230X User Manual

81
5. Using On-Screen Menu
Using	Test	Pattern	[TEST	PATTERN]
Displays	 the	test	 pattern	 to	check	 for	image	 distortion	 at	the	 time	 of	the	 projector	 setup.	Press	 the	ENTER	 button	to	
display	 the	test	 pattern; 	press	 the	EXIT	 button	 to	close	 the	test	 pattern	 and	return	 to	the	 menu. 	Menu	 operation	 and	
keystone	correction	are	not	possible	when	the	test	pattern	is	displayed.
[OPTIONS(1)]
Setting	Auto	Adjust	[AUTO	ADJUST]
This	feature	 sets	the	Auto	 Adjust	 mode	so	that	 the	computer...

82
5. Using On-Screen Menu
Selecting	Signal	Format	[SIGNAL	SELECT]
[COMPUTER1],	[COMPUTER2]
Allows	you	to	choose	 [COMPUTER1],	 or	[COMPUTER2]	 for	an	RGB	 source	 such	as	a	computer,	 or	[COMPONENT]	
for	 a	component	 video	source	 such	as	a	DVD	 player. 	Normally	 select	[RGB/COMPONENT]	 and	the	projector	 auto-
matically	detects	a	component	 signal.	However	 there	may	be	some	 component	 signals	that	the	projector	 is	unable	 to	
detect.	If	this	is	the	case,	select	[COMPONENT].
[VIDEO	&	S-VIDEO	System...

83
5. Using On-Screen Menu
[OPTIONS(2)]
Selecting	Power-saving	in	[STANDBY	MODE]
The	projector	has	two	standby	modes:	[NORMAL]	and	[POWER-SAVING].
The	POWER-SAVING	 mode	is	the	 mode	 that	allows	 you	to	put	 the	projector	 in	the	 power-saving	 condition	which	
consumes	less	power	than	the	NORMAL	mode. 	The	projector	is	preset	for	NORMAL	mode	at	the	factory.
NORMAL ����������������Power indicator: Orange light/STATUS indicator: Green light
POWER-SAVING
  ����Power indicator: Red light/STATUS indicator:...

84
5. Using On-Screen Menu
Turning	On	the	Projector	By	Applying	Computer	Signal	[AUTO	POWER	ON(COMP1)]
When	the	projector	 is	in	 Standby	 mode,	applying	 a	computer	 signal	from	a	computer	 connected	 to	the	 COMPUTER1	
IN	input	will	power	on	the	projector	and	simultaneously	project	the	computer’s	image.
This	 functionality	 eliminates	the	need	 to	always	 use	the	POWER	 button	on	the	 remote	 control	or	the	 projector	 cabinet	
to	power	on	the	projector.
To	use	this	function,	first	connect	a	computer...

85
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wired	 LAN	connection,	 connect	a	LAN	 cable	 (Ethernet	 cable)	to	the	 LAN	 port	(RJ-45)	 of	the	 projec-
tor.	(→	page	102)
TIP:	The	network	settings	you	make	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
[WIRED	LAN][DISABLE]Wired	LAN	connection	will	be	turned	off.
[ENABLE]Wired	LAN	connection	will	be	turned...

86
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless 
LAN Unit equipped) [WIRLESS LAN]
Important
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wireless	LAN	connection,	attach	the	optional	USB	Wireless	LAN	to	the	projector.	(→	page	103)
[PROFILE][DISABLE]Wireless	LAN	connection	will	be	turned	off
[EASY	CONNECTION]Select	[EASY	 CONNECTION]	 to	execute	 a	wireless	 LAN	
easily	using	Image	 Express	 Utility	Lite...

87
5. Using On-Screen Menu
Hints	on	How	to	Set	Up	LAN	Connection
To	set	up	the	projector	for	a	LAN	connection:
Access	the	HTTP	 server	 function	 to	display	 the	web	 browser	 (→	page	40)	 and	 select	 [NETWORK	 SETTINGS]	→ 
[SETTINGS]	→	[WIRELESS	LAN]	→	[PROFILE	1]	or	[PROFILE	2].
Two	settings	can	be	set	for	the	USB	 Wireless	LAN	Unit.
Next	select	 [SETTINGS]	 for	your	 selected	 profile,	and	set	[ENABLE]	 or	[DISABLE]	 for	[DHCP],	 [IP	ADDRESS],	
[SUBNET	 MASK],	and	[GATEWAY]. 	Last	 click	 [SAVE]. 	To...

88
5. Using On-Screen Menu
 Menu Descriptions & Functions [INFO.]
Displays	the	status	 of	the	 current	 signal	and	lamp	 usage. 	This	 item	has	six	pages. 	The	 information	 included	is	as	
follows:
TIP:	Pressing	the	HELP	button	on	the	remote	control	will	show	the	[INFO.]	menu	items.
[USAGE TIME]
[LAMP	LIFE	REMAINING]	(%)*
[LAMP	HOURS	USED]	(H)
[FILTER	HOURS	USED]	(H)
[TOTAL	CARBON	SAVINGS]	(kg-CO2)
*	 The	progress	indicator	shows	the	percentage	of	remaining	bulb	life.
	 The	 value	informs	 you	of	the...

89
5. Using On-Screen Menu
[SOURCE]
[SOURCE	NAME]	 	 [SOURCE	INDEX]
[HORIZONTAL	FREQUENCY]	 [VERTICAL	FREQUENCY]
[SIGNAL	TYPE]	 	 	 [VIDEO	 TYPE]
[SYNC	TYPE]	 	 	 [SYNC	POLARITY]
[SCAN	TYPE]
[WIRED LAN]
[IP	ADDRESS]	 [SUBNET	MASK]
[GATEWAY]	 [MAC	ADDRESS]
[WIRELESS LAN]
[IP	ADDRESS]	 [SUBNET	MASK]
[GATEWAY]	 [MAC	ADDRESS]
[SSID]	 	 [NETWORK	 TYPE]
[WEP/WPA]	 [CHANNEL]
[SIGNAL	LEVEL] 

90
5. Using On-Screen Menu
[VERSION]
[FIRMWARE]	Version
[DATA]	Version
[OTHERS]
[PROJECTOR	NAME]
[MODEL	NO.]
[SERIAL	NUMBER]
[LAN	UNIT	 TYPE]
[CONTROL	ID]	(when	[CONTROL	ID]	is	set)