NEC Projector L102W User Manual

34English ...
User Controls
OPTIONS | 
Information
 Information
To display the projector information for source, resolution, and 
software version on the screen.	“Aspect Ratio”, and “Color Space” are only supported un-der HDMI source. 

35... English
User Controls
OPTIONS | 
Advanced
 Direct Power On
Choose “On” to activate Direct Power mode. The projector will 
automatically power on when AC power is supplied, without 
pressing the  buton on the projector control panel or the POWER 
ON button on the remote control.
 Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in...

36English ...
User Controls
Multimedia is an interactive PC-less presentation solution. It 
equipped several mode (Photo, Video, Music, Office Reader, and 
Setting) with user-friendly user interface. 
To display the main menu of the Multimedia, press the USB-
A, USB-B or SD button on the remote control or press the 
SOURCE button.
Using Multimedia
Layer1: Main Menu
Layer2: Sub Menu
Layer3: Setting
PhotoMin:64x64, Max: Over 4000x4000
MusicFile size: Max. 2GB
VideoFile size: Max. 2GB
OfficeReaderSupport...

37... English
User Controls
How to operate 
1. To open the OSD, press the MENU button on the remote control.
2.  When OSD is displayed, use the     buttons to select any item 
in the main menu. While making a selection on a particular page, 
press the ENTER button to enter sub menu.
3.  Use the     buttons to select the desired item in the sub menu 
and adjust the settings by using the  or   button. 
5.   After adjusting the settings, press the EXIT button to go back to the 
main menu.
6.    To exit,...

38English ...
User Controls
Multimedia Menu Tree 
Level 1Level 2Level 3Level 4
SettingsPhoto SetupDisplay RatioAuto/Full
Slideshow Duration5 sec./15 sec./30 sec./1 min./5 min./15 min.
Slideshow RepeatOn/Off
Slideshow EffectRandom/Snake/Partition/Erase/Blinds/Lines/GridCross/Cross/Spiral/Rect/Off
Music SetupPlay ModeOnce/Repeat Once/Repeat/Random
Show SpectrumOn/Off
Auto PlayOn/Off
Video SetupDisplay RatioAuto/Orignal Size
Play ModeOnce/Repeat Once/Repeat/Random
Auto PlayOn/Off
Firmware UpgradeYes/No
To...

39... English
User Controls
Supported Formats 
■  Supported graphic formats:
JPG, BMP
JPG file supports JPEG Baseline and progressive JPEG.
BMP file supports full color only.
-  Some files supported by the above requirements may not be 
displayed
■  Supported audio formats:
WAV, MP3, WMA, OGG
WAV supports PCM and AD-PCM.
-  Some files supported by the above requirements may not be 
played.
■  Supported video formats:
AVI, MOV, MPG, MP4, WMV, MKV
MPEG 1/2/4, H.264/AVC, WMV9, Xvid, MJPEG@1080p
-  Some...

40English ...
User Controls
Restrictions on displaying Microsoft Office 
files and PDF files
The Office Reader allows you to give a simplified display of a 
Microsoft Office file or PDF file.
Due to simplified display, however, actual display may be dif-
ferent from the one on your computer application program.
 
■  Some restrictions on Microsoft Office files
• Fonts will be automatically converted to the fonts installed in 
the projector. Fonts can vary in size or width, causing layout 
corruption....

41... English
User Controls
Using the Projector as a Storage 
Device
Important:
•  Use the projector’s storage area as a temporary storage.Back up your data on your computer’s hard disk drive before using the projector as a storage device. We will not be liable for any data loss or damage that could result from using the projector.If your data is not to be used for a long period time, delete them from the projec-tor’s storage area.•  We will not be liable for any data loss or damage that could result...

42English ...
User Controls
Note:
•  Wait at least 5 seconds after disconnecting a USB memory device before recon-necting it and vice versa. The computer may not identify the USB memory device if it is repeatedly connected and disconnected in rapid intervals.•  To disconnect the USB cable from the projector, first click the USB icon on the Windows taskbar on your computer.•  Do not disconnect the power cord during data writing.•  Files in the drive of the projector will not be affected even when “Reset”...

43... English
User Controls
Projecting Your Computer’s Screen 
Image from the Projector via the USB 
Cable (USB Display)
Using a commercially available USB cable (compatible with 
USB 2.0 specifications) to connect the computer with the pro-
jector allows you to send your computer screen image to the 
projector for displaying. Power On/Off and source selection of 
the projector can be done from your computer without connect-
ing a computer cable (VGA).
Note:
•  To make USB DISPLAY available on Windows...