NEC Plasmasync 61xr3 Users Manual

E-7
qPower
Turns the monitor’s power on and off.
wRemote sensor window
Receives the signals from the remote control.
ePOWER/STANDBY indicator
When the power is on ............................. Lights green.
When the power is in the standby mode ... Lights red.
rINPUT SELECT / EXIT
Switches the input.
The available inputs depend on the settings of “BNC
INPUT”, “D-SUB INPUT”, “RGB SELECT” and
“DVI SET UP”.
Functions as the EXIT buttons in the On-Screen Menu
(OSM) mode.
Front View
MENU/ ENTERINPUT SELECT...

E-8
AAC IN
Connect the included power cord here.
BEXT SPEAKER L and R
Connect speakers (optional) here. Maintain the correct
polarity. Connect the 
 (positive) speaker wire to the
 EXT SPEAKER terminal and the  (negative)
speaker wire to the 
 EXT SPEAKER terminal on
both LEFT and RIGHT channels.
Please refer to your speaker’s owner’s manual.
CVIDEO1, 2, 3 (BNC, RCA, S-Video)
Connect VCR’s, DVD’s or Video Cameras, etc. here.
VIDEO1 can be used for Input or Output (see page E-
5).
DAUDIO1, AUDIO2, AUDIO3...

E-9
q POWER ON/STANDBY
Switches the power on/standby.
(This does not operate when POWER/STANDBY
indicator of the main unit is off.)
w RGB/PC
Press this button to select RGB/PC as the source.
RGB/PC can also be selected using the INPUT
SELECT button on the monitor.
eDVD / HD
Press this button to select DVD/HD as the source.
DVD/HD can also be selected using the INPUT
SELECT button on the monitor.
rVIDEO
Press this button to select VIDEO as the source.
VIDEO can also be selected using the INPUT SELECT...

E-10
Basic Operations
POWER
To turn the unit ON and OFF:
1. Plug the power cord into an active AC power outlet.
2. Press the Power button (on the unit).
The monitor’s POWER/STANDBY indicator turns red
and the standby mode is set.
3. Press the POWER ON button (on the remote control) to
turn on the unit.
The monitor’s POWER/STANDBY indicator will light
up (green) when the unit is on.
4.
Press the POWER STANDBY button (on the remote control)
or the Power button (on the unit) to turn off the unit.
The...

E-11
WIDE Operations
Wide Screen Operation (manual)
With this function, you can select one of six screen sizes.
When viewing videos or digital video discs
1. Press the WIDE button on the remote control.
2.Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
→ NORMAL → FULL → STADIUM → ZOOM → 2.35:1 → 14:9
When a 720P or 1080I signal is input:
FULL ↔  2.35:1
When displaying enhanced split screen:
NORMAL ↔  FULL
NORMAL size screen (4:3)
The normal size screen is...

E-12
FULL size screen
The image is expanded in the horizontal and vertical
direction.
ZOOM size screen
When wide signals are input.
TRUE
The image is true resolution.
FULL
Information
 Supported resolution
See page E-2 of Model Information for details on the
display output of the various VESA signal standards
supported by the monitor.
 “PICTURE SIZE” setting
When the setting of “PICTURE SIZE” is OFF, the size
of RGB-input pictures will be TRUE in place of
NORMAL.
 When 852 (848) dot  480 line wide...

E-13
Showing a couple of pictures on the
screen at the same time
* An RGB-input picture may not be displayed in these modes,
depending on the input signal specifications.
1. Press the button to select a screen mode from among single
mode, side-by-side, and picture-in-picture.
Note:
Picture A and B on the above screen are not always of the
same height.
Information
Split screen operations may not function depending on
the combination of input signals. In the table below,
“” means Yes, “” means No.
...

E-14
Operations in the Picture-in-picture mode
To move the position of the sub screen, press the cursor 

or  button.
To change the size of the sub screen, press the 
 button.
VIDEO1RGB/PC1
AB
VIDEO1RGB/PC1
AB
VIDEO1RGB/PC1
AB
VIDEO1RGB/PC1
AB
 button
 button
 button
 button
To make the desired picture active, press the SELECT/
FREEZE button.
Selecting the input signals to be displayed
1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Press the RGB/PC, VIDEO, or DVD/HD...

E-15
Menu Operations
The OSM window is displayed with respect to the
screen as shown on the diagram.
* Depending on the screen’s mode, the OSM may be
displayed differently.
In the explanation, the OSM section is shown close up.
MAIN MENU1 / 2
MENU/ENTEREXIT
PICTURE
AUDIO
IMAGE ADJUST
OPTION1
ADVANCED OSM
        NEXT PAGE
:     OFF
SEL.
EXIT OK
The following describes how to use the menus and the
selected items.
1. Press the MENU/ENTER button on the remote control to
display the MAIN MENU.
MAIN MENU1 /...

E-16
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESETREFERENCE
PICTURE CONTRAST←→
  0←52→72 YES E-18
BRIGHTNESS←→
  0←32→64 YES E-18
SHARPNESS←→
  0←16→32 YES E-18
COLOR←→
  0←32→64 YES E-18
TINT R←→G     0←32→64 YES E-18
PICTURE MODE BRIGHT/NORMAL/THEAT.1/THEAT.2/DEFAULT YES E-18
NR OFF/NR-1/NR-2/NR-3 YES E-18
COLOR TEMP LOW/MID LOW/MID/HIGH YES E-18
WHITE BALANCE GAIN RED←→
  0←→70 YES E-19
GAIN GREEN←→
  0←→70 YES E-19
GAIN BLUE←→
  0←→70 YES E-19
BIAS RED←→
  0←→70 YES E-19
BIAS...