NEC Plasmasync 42xp10 Users Manual

English
English-18
Main Menu Sub Menu Sub Menu2 Sub Menu3 Explanation Default Reset
OPTION3
(continued)VIDEO WALL Sets the con guration of video wall.
DIVIDER Sets the video wall. OFF YES
POSITION Sets the position of each display.
DISP. MODE Sets the mode of seam processing for each display. SPLIT YES
SCREEN ASPECT 
MODEAdjusts detail position.
V-POSITION0YES
H-POSITION0YES
V-HEIGHT0YES
H-WIDTH0YES
AUTO 
PICTUREOFF YES
CLOCK 
PHASE0YES
CLOCK0YES
UNDER 
SCANOFF YES
P.ON DEL AY Adjusts the delay time...

English-19
Operation
Picture Size Using Video Signals
Select one of seven picture sizes manually.
While viewing videos or digital video discs, perform the 
following actions:
1. Press the SIZE button on the remote control.
2. To switch the screen sizes, press the SIZE button again 
within 3 seconds. Th  e available sizes are NORMAL, FULL, 
DYNAMIC, ZOOM, 2.35:1, 14:9, and UNDERSCAN.
If a 720p, 1080i, or 1080p signal is displayed, the available 
sizes are FULL, 2.35:1, DYNAMIC, and UNDERSCAN.
If...

English
English-20
Operation - continued
Picture Size Using Computer 
Signals
To expand a 4:3 image to fi ll the entire screen, switch to the 
widescreen mode.
While viewing videos or digital video discs, perform the 
following actions:
1. Press the SIZE button on the remote control.
2. To switch the screen sizes, press the SIZE button again 
within 3 seconds. Th  e available sizes are NORMAL, FULL, 
and ZOOM.
If an enhanced split-screen is displayed, the available sizes 
are NORMAL and FULL.
NORMAL (4:3...

English-21
Split Screen Mode
To display multiple pictures on the screen, perform the 
following actions:
1. Press the desired SPLIT SCREEN function button on the 
remote (PIP, S BY S, SINGLE).
Only certain RGB signals are supported.
Split Screen mode works according to the table below.  
Side by Side Mode
Press the -, +, p or q buttons to change the picture size.Press the SWAP button to swap pictures.
Press the SELECT/FREEZE button to change the active 
picture.
Operation - continued
Picture displayed on...

English
English-22
Picture-in-Picture Mode
Press the + and - buttons to change the position of the sub-
picture.
Press the p and q buttons to change the size of the sub-
picture.
Press the SELECT/FREEZE button to change the active 
picture.
Displaying Input Signal
1. To make the desired picture active, press the SELECT/
FREEZE button.
2. To change the active signal, press the VIDEO, DVD/HD, 
or RGB button.
Th  e input selection may also be changed by pressing the 
INPUT button on the front of the unit....

English-23
Operation - continued
Creating a Video Wall
You can create a video wall consisting of up to 25 individual 
monitors with the built-in matrix display capability. Your 
Video Wall can have any of the following confi gurations: 
2x2, 3x3, 4x4, 5x5, 5x1, 4x1, 3x1, 2x1, 1x2, 1x3, 1x4, or 1x5.
Connect the signal cables as shown:
1. Select VIDEO WALL in the OPTION 3 OSD menu, then 
press the SET button.
2. Select the desired video wall confi guration in the 
DIVIDER fi eld.
3. Select POSITION in the...

English
English-24
USING THE TIMER
Turn the “ADVANCED OSD” to “ON” in the MAIN MENU 
to access the TIMER feature in OPTION3.
To user the TIMER feature the fi rst set the internal clock and 
the day of the week. Th  e display can also be programmed to 
turn on or off   at preset times, and which input the display 
will use at those times. Th  e Program Timer which turns on 
or off   the power at the day of the week, time and the input 
mode you want, or Repeat Timer which displays two input 
modes...

English-25
Operation - continued
REPEAT TIMER
Th  e Repeat Timer allows the display to alternate between 
inputs at user-determined intervals.
For example the display can be programmed to show the 
signal from "VIDEO1" for 10 minutes and then switch to 
showing the signal from the DVI input for 10 minutes.
To set the Repeat Timer select "REPEAT" in the Timer 
menu, then press the SET button. To enter the REPEAT 
TIMER OSD screen. Th  en make the desired settings.
STATE Settings
Th  ere...

English
English-26
Th  is monitor uses RXD, TXD and GND 
lines for RS-232C control.  
Th  e reverse type cable (null modem cable) 
should be used for RS-232C control.
Th  is Plasma monitor can be controlled via personal 
computer using an RS-232C connection.
MONITOR ID and RS-232C CONTROL
Up to 26 individual monitors can be controlled through a 
daisy chain via RS-232C connection.
  1.  Connect PC to the monitor.
Connect a PC’s RS-232C control output to the monitor's 
RS-232C input. You can then...

English-27
RS-232C - continued
Th  e following control sequence is used for a single monitor 
When using the following control commands, all of the daisy-chained monitors 
can be controlled at the same time from the primary monitor. However, reply and 
status commands will only pertain to the primary monitor, and not to the secondary 
monitors.
 1)  Interface 
PROTOCOL RS-232C
BAUD RATE 9600 [bps]
DATA LENGTH 8 [bits]
PARITY BIT NONE
STOP BIT 1 [bit]
FLOW CONTROL NONE
 2)  Control command diagram
Th  e...