NEC Plasmasync 42xm4 Users Manual

En-20
Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
On “CONTRAST” of “PICTURE” menu, adjust the contrast.
SEL. ADJ. RETURN
PICTURE 1 / 2
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
      NEXT PAGE
:   NORMAL
:   OFF
: 52
: 32
: 16
: 32
: 32
G R
EXIT:
 52CONTRAST
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to...

En-21
Adjusting the color to the desired level
Use this procedure to adjust the white balance for each
color temperature to achieve the desired color quality.
Example: Adjusting  the “GAIN RED” of “HIGH” color
temperature
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”,
then press the  MENU/ENTER button.
The “WHITE BALANCE” screen appears.
On “GAIN RED”, adjust the white balance.
SEL. ADJ. RETURN
WHITE BALANCE
COLOR TEMP. HIGH
GAIN RED
GAIN GREEN
GAIN BLUE...

En-22
Audio Settings Menu
Adjusting the treble, bass and left/right
balance and audio input select
The treble, bass and left/right balance can be adjusted to
suit your tastes.
Example: Adjusting the bass
On “BASS” of “AUDIO” menu, adjust the bass.
SEL. ADJ. RETURN
AUDIO
BASS
TREBLE
BALANCE
AUDIO INPUT 1
AUDIO INPUT 2
AUDIO INPUT 3
:   VIDEO1
:   HD/DVD1
:   RGB1
: 26
: 13
: ±
0
EXIT
RL
Note : If “CAN NOT ADJUST” appears...
Set “AUDIO INPUT” on the AUDIO menu correctly.
Information

 Audio settings menu...

En-23
Option1 Settings Menu
Setting the on-screen menu
This sets the position of the menu, the display format
(horizontal or vertical) etc.
Example: Turning the DISPLAY OSM off
On “OPTION1” menu, select “OSM”, then press the MENU/
ENTER button.
The “OSM” menu appears.
On “DISPLAY OSM” of “OSM” menu, select “OFF”.
SEL. ADJ. RETURN
OSM
EXIT
DISPLAY OSM
OSM ADJ.
OSM ANGLE
OSM ORBITER
OSM CONTRAST:   OFF
:   1
:   H
:   OFF 
:   LOW
Information

 DISPLAY OSM settings
ON: The informations on screen size,...

En-24
Setting high definition images to the suitable
screen size
Use this procedure to set whether the number of vertical
lines of the input high definition image is 1035 or 1080.
Example: Setting the “HD SELECT” mode to “1035I”
On “HD SELECT” of “OPTION1” menu, select “1035I”.
SEL. ADJ. RETURN
OPTION 1 1 / 4
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
              :   AUTO
HD SELECT
INPUT SKIP
ALL RESET
      NEXT PAGE:   RGB 
:   RGB 
:   1035
I:   OFF
:   OFF
EXIT
Information

 HD SELECT modes
These 3 modes...

En-25
Option2 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Setting the power management for computer
images
This energy-saving (power management) function
automatically reduces the monitor’s power consumption
if no operation is performed for a certain amount of time.
Example: 
Turning the power management function on
On “PWR. MGT.” of “OPTION2” menu, select “ON”.
SEL. ADJ. RETURN
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP...

En-26
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO2”
On “ORBITER” of “LONG LIFE” menu, select “AUTO2”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO2 
:   OFF
:   OFF
:   OFF
Information

 ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when RGB is input.
AUTO1: The picture moves around the screen
intermittently, making the picture smaller. This is the
default setting when a Video or a...

En-27
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “LONG LIFE” menu, select
“ON”.
SEL. ADJ. RETURNEXIT
LONG LIFEPLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS:   AUTO
:   AUTO1 
:   OFF
:   ON
:   OFF
Information

 SCREEN WIPER
ON: The white vertical bar appears.
You can set the time by pressing the MENU/ENTER
button while “ON” is set.
OFF: Screen...

En-28
Setting the screen size for S1/S2 video input
If the S-video signal contains screen size information, the
image will be automatically adjusted to fit the screen when
this S1/S2 is set to AUTO.
This feature is available only when an S-video signal is
input via the VIDEO3 terminal.
Example: Setting “S1/S2” to “AUTO”
On “S1/S2” of “OPTION2” menu, select “AUTO”.
SEL. ADJ. RETURN
OPTION 2 2 / 4
      PREVIOUS PAGE
PWR. MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP 
CLOSECAPTION...

En-29
Option3 Settings Menu
Set “ADVANCED OSM” to “ON” in the MAIN MENU.
Using the timer
This function sets the monitor to turn ON/OFF
automatically at a set time.
On “OPTION3” menu, select “TIMER”, then press the
MENU/ENTER button.
The “TIMER” screen appears.
SEL. RETURN
TIMER
PRESENT TIME
PROGRAM
MULTI REPEAT:   OFF
:   OFF
EXIT
MENU/ENTEROK
PRESENT TIME
This sets the day of the week and present time.
Example: Setting “WEDNESDAY”, “22:05”
On “TIMER” menu, select “PRESENT TIME”, then press
the...