NEC Np901w Projector User Manual

17
AUDIO INL RAUDIO OUTLRVIDEO OUTS-VIDEOVIDEO
WIRELESS
WIRELESS
USB ( LAN )
VIDEO INAUDIO IN
USBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 IN
PC CONTROLMONITOR OUTAUDIO OUT
S-VIDEO INAUDIO IN
L/MONO
L/MONO
R
R
S-VIDEO IN
VIDEO IN
AUDIO IN
AUDIO IN
2. Installation and Connections
Connecting Your VCR
s-Video cable (not supplied)
Video cable (not supplied)
VC r a udio equipment
a udio cable (not supplied)
NOTE: Refer to your VCR owner’s manual for more information about your...

18
2. Installation and Connections
Connecting to a Network
The  NP905/NP901W  comes  standard  with  a  LAN  port  (RJ-45)  which  provides  a  LAN  connection  using  a  LAN 
cable.  The  USB  Wireless  LAN  Unit  also  provides  a  wireless  LAN  connection.  To  use  a  LAN  connection,  you  are 
required to assign an IP address to the projector. For setting the NETWORK, see page 99. (From the menu, select 
[S ETUP] → [I NSTALLATION (2)] → [NETWORK SETTINGS])
NOTE: Some NEC models does not come...

19
2. Installation and Connections
Example of LAN connection
(A) Example of wired LAN connection
LAN
WIRELESS
WIRELESSUSB ( LAN )
VIDEO INAUDIO IN
USBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONO
L/MONO
R
R
server
h ub
(B) Example of wireless LAN connection
(Network Type → Infrastructure)
 PC with wireless 
lan card insertedPC with built-in wireless 
lan function
Wireless  lan
Wireless access point
U
s
B Wireless  lan...

20
2. Installation and Connections
To  enable  direct  communication  (i.e.,  peer-to-peer)  between  personal  computers  and  projectors,  you  need  to 
select the Ad Hoc mode.
From  the  menu,  select  [S ETUP] →  [I NSTALLATION (2)] →  [N ETWORK   SETTINGS] →  [WIRELESS] →  [A D-
VANCED] → [CONNECTION] → [NETWORK TYPE] → [A D  H OC].
The Ad Hoc mode complies with IEEE802.11 standard.
PC with wireless 
lan
 card insertedPC with built-in wireless 
lan function
(C) Example of wireless LAN connection...

21
VIDEO INAUDIO IN
USBLAN
AUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 IN
COMPUTER /COMPONENT 1 IN
PC CONTROL
MONITOR OUTAUDIO OUT
S-VIDEO INAUDIO INL/MONO
L/MONOR
R
AC IN
USBLAMPSTATUS
SOURCEAUTO ADJUST3D REFORM
SELECT
 (LAN)USB
WIRELESS
WIRELESS
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First  connect  the  supplied  power  cable’s  three-pin  plug  to  the  AC  IN  of  the  projector,  and  then  connect  the  other 
plug...

22
VIDEO INAUDIO IN
USBLAN
AUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUT
S-VIDEO INAUDIO INL/MONOL/MONORR
AC IN
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT
 (LAN)USB
WIRELESSWIRELESS
USBLAMPSTATUS
COMPUTERVIDEOS-VIDEOVIEWERNETWORKHDMIPIP
MENUEXIT
COMPONENTAUTO ADJ.
1324657980CLEAR
POWER
ID
1 23
OFFON
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORM
SELECT
3. Projecting an Image (Basic Operation)
This section describes how to turn on the projector and to...

2
ENTER
MAGNIFYVOLUME
PICTURELAMP MODEASPECTAV-MUTE3D REFORMFREEZEID SETLENS SHIFTFOCUS/ZOOMHELP
PAGE
MENU
L-CLICKR-CLICK
EXIT0CLEAR
UP
DOWN
ID
ID
MAGNIFYVOLUME
PICTURELAMP MODEASPECTAV-MUTE3D REFORMFREEZEID SETLENS SHIFTFOCUS/ZOOMHELP
PAGE
MENU
L-CLICKR-CLICK
EXIT0CLEAR
ENTER
UP
DOWN
ID
ID
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORM
SELECT
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORM
SELECT
3. Projecting an Image (Basic Operation)
Note on Startup screen (Menu Language Select screen)
When  you  first  turn...

24
USBLAMPSTATUSSOURCEAUTO ADJUST3D REFORM
SELECT
3. Projecting an Image (Basic Operation)
 Selecting a Source
Selecting the computer or video source
Detecting the Signal Automatically
Press  and  hold  the  SOURCE  button  for  a  minimum  of  1  second,  the  projector 
will search for the next available input source. Each time you press and\
 hold the 
SOURCE button for a minimum of 1 second, the input source will change as\
 fol-
lows:
COMPUTER 1
 → C OMPUTER 2 → HDMI → V IDEO → S-V IDEO → V IEWER...

25
3. Projecting an Image (Basic Operation)
Use the adjustable tilt foot lever, the zoom lever or the focus ring to \
adjust the picture size and position.
 Adjusting the Picture Size and Position
NOTE*: See “  Correcting Keystone Distortion” on page 28 for Keystone.
* In the above drawings, cables are omitted for clarity.
Adjusting the focus
[Focus ring]
Adjusting the throw angle (the height of an image)
[Tilt foot]
Finely adjusting the size of an image
[Zoom lever]
Adjusting the left and right tilt...

2
3. Projecting an Image (Basic Operation)
Adjusting the focus (Focus ring)
•  Rotate the focus ring to make focus adjustment.
Finely adjusting the size of an image (Zoom lever)
•  Rotate the zoom lever to adjust the image size on the screen.
VIDEO INAUDIO INUSBLANAUDIO INHDMI INAUDIO INCOMPUTER /COMPONENT 2 INCOMPUTER /COMPONENT 1 INPC CONTROLMONITOR OUTAUDIO OUTS-VIDEO INAUDIO INL/MONOL/MONORRAC IN
 (LAN)USBWIRELES SWIRELES SUSBLAMPSTATUSSOURCEAUTO ADJUST3D REFORMSELECT
VIDEO INAUDIO...