NEC Np610s Projector User Manual
Here you can view all the pages of manual NEC Np610s Projector User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
12 2. Installation and Connections [NP510W/NP410W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 21" (0.53 m) measured diagonally when the projector is roughly 31 inches (0.8 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 431 inches (11.0 m) from the wall or screen. 300 240 Distance (Unit: m/inch) Lens center Screen Size Screen...
Page 22
13 2. Installation and Connections [NP610S] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 60" (1.52 m) measured diagonally when the projector is roughly 35 inches (0.9 m) from the wall or screen. The largest the image can be is 110" (2.8 m) when the projector is about 66 inches (1.7 m) from the wall or screen. 110 Distance (Unit: m/inch) Lens center Screen Size Screen Size (Unit: cm/inch)...
Page 23
14 2. Installation and Connections [NP510WS] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is ap- proximately 57" (1.45 m) measured diagonally when the projector is roughly 36 inches (0.9 m) from the wall or screen. The largest the image can be is 104" (2.6 m) when the projector is about 66 inches (1.7 m) from the wall or screen. 104 Distance (Unit: m/inch) Lens center Screen Size Screen Size (Unit: cm/inch)...
Page 24
15 2. Installation and Connections C α B D Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart [NP610/NP510/NP410/NP405/NP310/NP305/NP510W/NP410W] B = Ver tical distance between lens center and screen center C = Throw distance D = Ver tical distance between lens center and screen bottom (top of screen for ceiling ap - plication) α =...
Page 25
16 2. Installation and Connections [NP610S] Screen SizeBC Dα Diagonal WidthHeight widewide inch mminch mminch mminch mminch mminch mmdegree 60 1524 481219 36914 20505 35895 24829.4 64 1626 511300 38975 21538 38956 25129.4 70 1778 561422 421067 23589 411049 25629.3 77 1956 621565 461173 26648 461156 26129.3 80 2032 641626 481219 27673 471203 36429.2 90 2286 721829 541372 30757 531357 37129.2 100 2540 802032 601524 33841 591511 37929.1 110 2794 882235 661676 36926 661665 38729.1 [NP510WS] Screen SizeB C...
Page 26
17 2. Installation and Connections COMPUTER 1 INCOMPUTER 2 INAUDIO IN PHONE IBM VGA or Compatibles (Notebook type) or Macintosh (Notebook type) VGA signal cable (supplied)To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the cable supplied. NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac’s video port. Audio cable...
Page 27
18 2. Installation and Connections • Select the source name for its appropriate input connector after turning on the projector. [NP610/NP510/NP410/NP310/NP510W/NP410W/NP610S/NP510WS] Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER 1 IN COMPUTER1(COMPUTER 1) COMPUTER 2(DVI-I)IN COMPUTER 2(DIGITAL) or COMPUTER 2(ANALOG) (COMPUTER 2) [NP405/NP305] Input connectorSOURCE button on the projector cabinetButton on the remote control COMPUTER 1 IN COMPUTER...
Page 28
19 2. Installation and Connections When Viewing a DVI Digital Signal (except NP405 and NP305) To project a DVI digital signal, be sure to connect the PC and the projector using a DVI cable (not supplied) before turning on your PC or projector. Turn on the projector first and select Computer 2 (Digital) from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should...
Page 29
20 2. Installation and Connections COMPUTER 1 IN COMPUTER 2 (DVI-I) IN COMPUTER 2 INAUDIO IN PHONE VGA signal cable (supplied) IBM PC or Compatibles (Notebook type) or Macintosh (Notebook type) IBM PC or Compatibles (Desktop type) or Macintosh (Desktop type) VGA signal cable (not supplied) DVI to VGA adapter (supplied) NOTE: When the DVI to VGA adapter is not to be used for an extended period of time, remove it from the projector. Failure to do so may cause damage to the connector of the...
Page 30
21 2. Installation and Connections Connecting an External Monitor You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: • Daisy chain connection is not possible. • When audio equipment is connected, the projector speaker is disabled. AUDIO IN PHONE MONITOR OUT (COMP 1) AUDIO OUT VGA signal cable (sup- plied) VGA signal cable (not supplied)