NEC Np610 Projector User Manual

62
5. Using On-Screen Menu
[GENERAL]
Storing	Your	Customized	Settings	[REFERENCE]
This	function	allows	you	to	store	your	customized	settings	in	[PRESET	1]	to	[PRESET	6].
First,	select	 a	base	 preset	 mode	from	[REFERENCE],	 then	set	[GAMMA	 CORRECTION]	 and	[COLOR	 TEMPERA-
TURE].	
HIGH-BRIGHT ........Recommended for use in a brightly lit room.
PRESENTATION
 .....Recommended for making a presentation using a PowerPoint file.
VIDEO
 ....................Recommended for typical TV program viewing.
MOVIE...

63
5. Using On-Screen Menu
[HUE]
Varies	the	color	level	from	+/−	green	to	+/−	blue.	The	red	level	is	used	as	reference.
Input	signalCONTRAST BRIGHTNESS SHARPNESS COLORHUE
Computer	(RGB	DIGITAL)YesYesYes NoNo
Computer	(RGB	ANALOG)YesYesYes NoNo
Component YesYesYesYes* Yes*
Video,	S-VideoYesYesYesYesYes
Yes	=	Adjustable,	No	=	Not	adjustable,	 Yes*	=	depending	on	the	signal
NOTE:	The	NP405	and	NP305	do	not	support	“Computer	(RGB	DIGITAL)”	signal.
[RESET]
The	settings	 and	adjustments	 for	[CONTRAST],...

64
5. Using On-Screen Menu
[IMAGE OPTIONS]
Adjusting	Clock	and	Phase	[CLOCK/PHASE]
This	allows	you	to	manually	adjust	CLOCK	and	PHASE.
CLOCK ...................Use this item to fine tune the computer image or to remove any vertical banding that might appear. This 
function adjusts the clock frequencies that eliminate the horizontal ban\
ding in the image.
This adjustment may be necessary when you connect your computer for the first time.
PHASE ...................Use  this  item  to  adjust  the  clock...

65
5. Using On-Screen Menu
Adjusting	Horizontal/Vertical	Position	[HORIZONTAL/VERTICAL]
Adjusts	the	image	location	horizontally	and	vertically.
-	 An	image	can	be	distorted	during	the	adjustment	of	[CLOCK]	and	[PHASE].	This	is	not	malfunction.
-	 The	 adjustments	 for	[CLOCK],	 [PHASE],	[HORIZONTAL],	 and	[VERTICAL]	 will	be	stored	 in	memory	 for	the	
current	 signal.	The	 next	 time	 you	project	 the	signal	 with	the	same	 resolution,	 horizontal	and	vertical	 frequency,	
its	adjustments	will	be	called...

66
5. Using On-Screen Menu
Selecting	Aspect	Ratio	[ASPECT	RATIO]
The	term	“aspect	ratio” 	refers	to	the	ratio	of	width	to	height	of	a	projected	image.
The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio.
•	This	table	shows	typical	resolutions	and	aspect	ratios	that	most	computers	support.
ResolutionAspect	RatioVGA  640 x 480	 4:3
SVGA  800 x 600	 4:3
XGA  1024 x 768	 4:3
WXGA  1280 x 768	 15:9
WXGA  1280 x 800	 16:10
WXGA+  1440 x 900	 16:10
SXGA...

67
5. Using On-Screen Menu
Sample	image	when	the	appropriate	aspect	ratio	is	automatically	determined
NP610/NP510/NP410/NP405/NP310/NP305/NP610S
[Computer	signal]
Aspect ratio of incoming signal4:35:416:9 15:916:10
Sample	image	when	the	appro-
priate  aspect  ratio  is  automati -
cally determined
[Video	signal]
Aspect ratio of incoming signal4:3 Letterbox Squeeze
Sample	image	when	the	as-
pect  ratio  is  automatically  de -
termined
NOTE:	 To	display	 a	squeezed	 signal	prop-erly,	select	[16:9]	or...

68
5. Using On-Screen Menu
 Menu Descriptions & Functions [SETUP]
[GENERAL]
[NP610/NP510/NP410/NP405/NP310/NP305/NP510W/
NP410W][NP610S/NP510WS]
Using	Digital	Zoom	[DIGITAL	ZOOM]	(NP610S/NP510WS)
This	feature	allows	you	to	electronically	fine	adjust	the	image	size	on	the	screen.
Use	 or  button to large or reduce the projected image.
TIP:
To	 adjust	 the	projected	 image	size	roughly,	 move	the	projector	 away	or	closer	 to	the	 screen.	 (→ page  30).	To	 fine	 adjust	 the	zoom,	
use	the	[DIGITAL...

69
5. Using On-Screen Menu
Using	the	Wall	Color	Correction	[WALL	COLOR]
 
This	function	allows	for	quick	adaptive	color	correction	in	applications	where	the	screen	material	is	not	white.
NOTE:	Selecting	[WHITEBOARD]	reduces	lamp	brightness.
Setting	Eco	Mode	[ECO	MODE]
This	feature	 turns	on	or	off	 the	 ECO	 mode. 	The	 lamp	 life	can	 be	extended	 by	selecting	 [ON].	Selecting	 [ON]	also	
decreases	fan	noise	when	compared	to	[OFF]	mode.
ECO	MODEDescriptionStatus	of	LAMP	indicator
OFFThis	is	the	Default...

70
5. Using On-Screen Menu
Setting	Closed	Caption	[CLOSED	CAPTION]
This	option	 sets	several	 closed	caption	 modes	that	allow	 text	to	be	 superimposed	 on	the	 projected	 image	of	Video	
or	S-Video.
OFF ........................This exits the closed caption mode.
CAPTION 1-4
 .........Text is superimposed.
TEXT 1-4
 ................Text is displayed.
NOTE:
•	 The	closed	caption	is	not	available	under	the	following	conditions:
-  when messages or menus are displayed.
-	 when	an	image	is	magnified,...

71
5. Using On-Screen Menu
Turning	On	/	Off	Eco	Message	[ECO	MESSAGE]
This	option	turns	on	or	off	the	following	messages	when	the	projector	is	turned	on.	
The	Eco	Message	 prompts	the	user	 to	save	 energy. 	When	 [OFF]	is	selected	 for	[ECO	 MODE],	 you	will	get	 a	message	
to	prompt	you	to	select	[ON]	for	[ECO	MODE].
When	[ON]	is	selected	for	[ECO	MODE]
To	 close	 the	message,	 press	any	one	 of	the	 buttons. 	The	 message	 will	disappear	 if	no	 button	 operation	 is	done	 for	
30 seconds.
When	[OFF]...