Home > NEC > Projector > NEC Np610 Edu Projector User Manual

NEC Np610 Edu Projector User Manual

Here you can view all the pages of manual NEC Np610 Edu Projector User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

12
2. Installation and Connections
[NP510W/NP410W]
The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	
approximately	 21"	(0.53	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 31	inches	 (0.8	m)	from	 the	wall	 or	
screen. 	The	 largest	 the	image	 can	be	is	300"	 (7.6	m)	when	 the	projector	 is	about	 431	inches	 (11.0	m)	from	 the	wall	
or screen.
300
240
Distance 
(Unit: m/inch)
Lens center Screen Size
Screen...

Page 22

13
2. Installation and Connections
[NP610S]
The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	ap-
proximately	 60"	(1.52	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 35	inches	 (0.9	m)	from	 the	wall	 or	screen. 	
The	largest	the	image	can	be	is	110"	(2.8	m)	when	the	projector	is	about	66	inches	(1.7	m)	from	the	wall	or	screen.
110
Distance 
(Unit: m/inch)
Lens center Screen Size
Screen Size (Unit: cm/inch)...

Page 23

14
2. Installation and Connections
[NP510WS]
The	further	 your	projector	 is	from	 the	screen	 or	wall,	 the	larger	 the	image. 	The	 minimum	 size	the	image	 can	be	is	ap-
proximately	 57"	(1.45	 m)	measured	 diagonally	 when	the	projector	 is	roughly	 36	inches	 (0.9	m)	from	 the	wall	 or	screen. 	
The	largest	the	image	can	be	is	104"	(2.6	m)	when	the	projector	is	about	66	inches	(1.7	m)	from	the	wall	or	screen.
104
Distance 
(Unit: m/inch)
Lens center Screen Size
Screen Size (Unit: cm/inch)...

Page 24

15
2. Installation and Connections
C
α B
D
Throw Distance and Screen Size
The	
following	 shows	the	proper	 relative	 positions	 of	the	 projector	 and	screen. 	Refer	 to	the	 table	 to	determine	 the	
position of installation.
Distance	Chart	[NP610/NP510/NP410/NP405/NP310/NP305/NP510W/NP410W]
B	=	 Ver tical 	distance 	between 	lens 	center 	and	
screen center
C	=	 Throw	distance
D	=	 Ver tical 	distance 	between 	lens 	center 	and	
screen  bottom  (top  of  screen  for  ceiling  ap -
plication)
α
	=...

Page 25

16
2. Installation and Connections
[NP610S]
Screen SizeBC
Dα
Diagonal WidthHeight widewide
inch mminch mminch mminch mminch mminch mmdegree
60 1524 481219 36914 20505 35895 24829.4
64 1626 511300 38975 21538 38956 25129.4
70 1778 561422 421067 23589 411049 25629.3
77 1956 621565 461173 26648 461156 26129.3
80 2032 641626 481219 27673 471203 36429.2
90 2286 721829 541372 30757 531357 37129.2
100 2540 802032 601524 33841 591511 37929.1
110 2794 882235 661676 36926 661665 38729.1
[NP510WS]
Screen SizeB C...

Page 26

17
2. Installation and Connections
COMPUTER 1 INCOMPUTER 2 INAUDIO IN
PHONE 
IBM	VGA	or	Compatibles	(Notebook	type)	or	Macintosh	(Notebook	type)
VGA signal cable (supplied)To mini D-Sub 15-pin connector on 
the projector. It is recommended that 
you use a commercially available 
distribution amplifier if connecting a 
signal cable longer than the cable 
supplied.
NOTE:	For	older	Macintosh,	use	a	commercially	available	
pin	adapter	 (not	supplied)	 to	connect	 to	your	 Mac’s	 video	
port.
Audio cable...

Page 27

18
2. Installation and Connections
•	 Select	the	source	name	for	its	appropriate	input	connector	after	turning	on	the	projector.
[NP610/NP510/NP410/NP310/NP510W/NP410W/NP610S/NP510WS]
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	1	IN	COMPUTER1(COMPUTER	1)
COMPUTER	2(DVI-I)IN
	COMPUTER	2(DIGITAL)
or
	COMPUTER	2(ANALOG)
(COMPUTER	2)
[NP405/NP305]
Input	connectorSOURCE	button	on	the	projector	
cabinetButton	on	the	remote	control
COMPUTER	1	IN	COMPUTER...

Page 28

19
2. Installation and Connections
When Viewing a DVI Digital Signal (except NP405 and NP305)
To	project	 a	DVI	 digital	 signal,	 be	sure	 to	connect	 the	PC	and	 the	projector	 using	a	DVI	 cable	 (not	supplied)	 before	
turning	on	your	 PC	or	projector. 	Turn	 on	the	 projector	 first	and	 select	 Computer	 2	(Digital)	 from	the	source	 menu	before	
turning	on	your	PC.
Failure	 to	do	 so	may	 not	activate	 the	digital	 output	 of	the	 graphics	 card	resulting	 in	no	 picture	 being	displayed. 	Should...

Page 29

20
2. Installation and Connections
COMPUTER 1 IN COMPUTER 2 (DVI-I) IN
COMPUTER 2 INAUDIO IN
PHONE
VGA signal cable  
(supplied)
IBM	PC	or	Compatibles	(Notebook	type)	or	Macintosh	(Notebook	type)
IBM	PC	or	Compatibles	(Desktop	type)	or	Macintosh	(Desktop	type)
VGA signal cable (not 
supplied)
DVI to VGA adapter (supplied)
NOTE:	 When	the	DVI	 to	VGA	 adapter	 is	not	 to	be	 used	 for	an	extended	 period	of	time,	 remove	 it	from	 the	projector.	 Failure	to	do	 so	
may cause damage to the connector of the...

Page 30

21
2. Installation and Connections
Connecting an External Monitor
You	can	connect	 a	separate,	 external	monitor	to	your	 projector	 to	simultaneously	 view	on	a	monitor	 the	computer	
analog image you’re projecting.
NOTE:
•	 Daisy	chain	connection	is	not	possible.
•	 When	audio	equipment	is	connected,	the	projector	speaker	is	disabled.
AUDIO 
IN PHONE 
MONITOR OUT (COMP 1)
AUDIO OUT 
VGA signal cable (sup-
plied)
VGA signal cable (not supplied) 
Start reading NEC Np610 Edu Projector User Manual

Related Manuals for NEC Np610 Edu Projector User Manual

All NEC manuals