NEC Np600j Projector Technical Specifications
Have a look at the manual NEC Np600j Projector Technical Specifications online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 1 of 6 Contents Product Description, Lens Specs, Notes and Formulas Pg 1 Diagrams & Distance Charts Pg 2 Cabinet Dimensions Pg 3-4 Ceiling Mount Dimensions Pg 5 Input Panel and Control Codes Pg 6 Product Description Type: 3 panel LCD projector, Dimensions: 12.1” (W) x 4.3” (H) x 10.4” (D) 0.63” p-Si TFT w/MLA Weight: 6.6 lbs Resolution: 1024 x 768 Brightness: NP400 - 2600 Lumens Fan Noise: 35 dB / 29dB @ 1 meter NP500 - 3000 Lumens NP600 - 3500 Lumens Power Consumption: NP400/NP500 295W (max) BTU’s: 1007 BTU/hour NP600 325W (max) Lens Specifications Throw Ratio: 1.5 – 1.8:1 (for 100” diagonal ) Focal Length: 19.8mm – 23.7mm Offset Angle: 8.0° - 9.6° (f or 100” diagonal) F/#: 1.7 - 2.0 Screen Sizes: 21” - 300” diagonal (4:3) Manual Focus/Manual Zoom Notes ƒ For screen sizes not indicated on the projection tables, use the formulas below. If the figures on the tables do not match the resu lts of formulas, use the figures in the table. • All calculations are based on a 4:3 aspect ratio. • Distances are in inches, for millimeters multiply by 25.4. • Distances may vary ±5%. Formulas The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width for the desired screen size. Use the Screen Formulas below to cal culate all screen dimensions. Plug in the width for “W” in the Projection Formulas. Refer to the diagrams and charts for popular screen sizes on page 2: Definitions: 4:3 Screen Formulas: W = Image Width W = H x 4/3 H = Image Height (size) H = W x 3/4 B = Vertical distance between lens center an d screen center Screen Diagonal = W x 5/4 C = Throw distance D = Vertical distance between lens center and screen top (screen bottom for desktop application) Projection Formulas: B = 0.258W C (wide) = 1.5496W – 1.823 C (tele) = 1.8638W – 1.820 D = 0.118W α (wide) = tan¯¹ (B/C(wide)) α (tele) = tan¯¹ (B/C(tele))
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 2 of 6 Diagrams and Distance Charts The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distances are in inches. For millimeters multiply by 25.4. Lens Offset From Mount Pipe B C Lens Ctr Screen Ctr Throw Distance Screen Bottom 2.22 C Throw Distance Screen Top4.56 5.17 D B Lens Ctr Screen Ctr D 2.79 Ceiling Mounted Desktop Diagonal Width(W) Height (H) inc hes inc hes inches inc hes 30 24 18 6 35 - 43 9.9 - 8.2 60 48 36 12 73 - 88 9.7 - 8.0 67 53.6 40.2 14 81 - 98 9.7 - 8.0 72 57.6 43.2 15 87 - 106 9.6 - 8.0 84 67.2 50.4 17 102 - 123 9.6 - 8.0 90 72 54 19 110 - 132 9.6 - 8.0 100 80 60 21 122 - 147 9.6 - 8.0 120 96 72 25 147 - 177 9.6 - 8.0 150 120 90 31 184 - 222 9.5 - 8.0 180 144 108 37 221 - 267 9.5 - 8.0 210 168 126 43 258 - 311 9.5 - 7.9 240 192 144 50 296 - 356 9.5 - 7.9 270 216 162 56 333 - 401 9.5 - 7.9 300 240 180 62 370 - 445 9.5 - 7.9degrees Sc r een Siz e ( 4:3) -6inches-3 B C w ide - teleinches D α w ide - tele -6 -7 -8 -8 -9 -11 -14 -17 -20 -23 -25 -28 Distance Chart for popular 4:3 screens Note: For screen sizes not indicated on the projection tables, use the formulas on page 1.
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 3 of 6 Cabinet Dimensions The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. Lens Center Lens Center Zoom Lever Focus Lever Lamp I n t a ke Exhaust E xh au st
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 4 of 6 Cabinet Dimensions (continued) The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. I n t a keLens Center3 - M4*8 Max for Ceiling Mount Kit Intake E xh a ust Exhaust
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 5 of 6 Optional Ceiling Mount Dimensions (Model #: NP600CM) The following drawings show the ceiling mount dimensions. Dimensions are in inches. For millimeters multiply by 25.4.
NEC Display Solutions of America, Inc. NP400/NP500/NP600 Installation Guide Ceiling Mounted and Desktop Rev 1.0 www.necdisplay.com NP400/NP500/NP600 Page 6 of 6 Input / Output Panel PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EH INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H INPUT SELECT DVI (DIGITAL) 02H 03H 00H 00H 02H 01H 1AH 22H INPUT SELECT DVI (ANALOG) 02H 03H 00H 00H 02H 01H 02H 0AH PICTURE MUTE ON 02H 10H 00H 00H 00H 12H PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H SOUND MUTE ON 02H 12H 00H 00H 00H 14H SOUND MUTE OFF 02H 13H 00H 00H 00H 15H PROJECTOR INFORMATION REQUEST 00H BFH 00H 00H 01H 02H C2H ERROR STATUS REQUEST 00H 88H 00H 00H 00H 88H INFORMATION REQUEST 03H 8AH 00H 00H 00H 8DH Note: Contact your NEC rep for codes not listed. Cable Connection Communication Protocol: Baud Rate: 38400 bps Data Length: 8 bits Parity: No Parity Stop Bit: One Bit X on/off: None Communications: Full duplex 12 34 5 67 8 9To GND of PC To RxD of PC To TxD of PC To CTS of PC To RTS of PC PC Control Connector (D-Sub 9P NOTE 1 : Pins 1, 4, 6, and 9 are used inside the projector. NOTE 2: For long cable runs it is recommended to set co mmunication speed within the projector to 9600 bps. NOTE 3: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
7 To Do this Play (from the point you stopped) Push the 3- way control key toward N/>. Playback starts from the point you stopped. Play (from the first track) Push the control key toward N/> and hold it for 2 seconds or more. Stop Press x/CHG*2 Find the beginning of the current track (AMS*1) Push the control key toward .once quickly*2 Find the beginning of the previous tracks (AMS) Push the control key toward . repeatedly*2, *3 Find the beginning of the next track (AMS) Push the control key toward N/> once quickly*2, *3 Find the beginning of the succeeding tracks (AMS) Push the control key toward N/> repeatedly*2, *3 Go backwards quickly Push the control key toward . and hold it*2 Go forward quickly Push the control key toward N/> and hold it*2 *1Automatic Music Sensor *2These operations can be done during play. *3After you have played the last track, you can return to the beginning of the first track by pushing the 3- way control key toward N/> . Similarly, if you are at the first track, you can locate the last track by pushing the control key toward .. Playing a CD 3. Play a CD. Push the 3-way control key toward N/>.Adjust the volume. (Continued)
8 About the display •When you push the 3- way control key toward N/> after changing the CD or turning off and on the player, the total number of tracks in the CD and total playing time appear for about two seconds. •During play, the track number and the elapsed playing time of the current track appear. If the volume level does not increase If “AVLS” appears in the display, hold down SOUND until “AVLS ” disappears from the display. For details, see “Protecting your hearing (AVLS).” About CD-Rs/CD-RWs This CD player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio CDs. Removing the CD Remove the CD while pressing the pivot in the center of the tray.
9 Playback options You can enjoy various ways of playback using PLAY MODE and REPEAT/ENTER. PLAY MODE button Each time you press the button, you can change the playback mode. No indication (Normal play) “1” (Play a single track) “SHUF” (Play tracks in random order) “PGM” (Play tracks in your favorite order) REPEAT/ENTER button REPEAT You can repeat play that is selected using PLAY MODE. ENTER You can select tracks for PGM play mode. Playback options 3- way control key (N/>, .) (Continued)
10 Playing tracks repeatedly (Repeat play) You can play tracks repeatedly in normal, single, shuffle and PGM play modes. During playback, press REPEAT/ENTER. Playing a single track (Single play) During playback, press PLAY MODE repeatedly until “1” appears. Playing tracks in random order (Shuffle play) During playback, press PLAY MODE repeatedly until “SHUF” appears.